Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-12 16:07:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c

476 lines
11 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
/*
armv8/fsl_lsch3: Change arch to fsl-layerscape There are two LS series processors are built on ARMv8 Layersacpe architecture currently, LS2085A and LS1043A. They are based on ARMv8 core although use different chassis, so create fsl-layerscape to refactor the common code for the LS series processors which also paves the way for adding LS1043A platform. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26 11:47:50 +00:00
* Copyright 2014-2015 Freescale Semiconductor, Inc.
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
*/
#include <common.h>
#include <asm/io.h>
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-21 02:28:55 +00:00
#include <linux/errno.h>
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
#include <asm/arch/fsl_serdes.h>
armv8/fsl_lsch3: Change arch to fsl-layerscape There are two LS series processors are built on ARMv8 Layersacpe architecture currently, LS2085A and LS1043A. They are based on ARMv8 core although use different chassis, so create fsl-layerscape to refactor the common code for the LS series processors which also paves the way for adding LS1043A platform. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26 11:47:50 +00:00
#include <asm/arch/soc.h>
driver/ldpaa: Add support of WRIOP static data structure Wire rate IO Processor (WRIOP) provide support of receive and transmit ethernet frames from the ethernet MAC. Here Each WRIOP block supports upto 64 DPMACs. Create a house keeping data structure to support upto 16 DPMACs and store external phy related information. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:22 +00:00
#include <fsl-mc/ldpaa_wriop.h>
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
#ifdef CONFIG_SYS_FSL_SRDS_1
static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
#endif
armv8: ls2080aqds: Add support for SD boot Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-05 10:12:29 +00:00
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
armv8: lsch3: Fix lane protocol parsing logic Current implementation only consider SGMIIs for dpmac initialization. XFI serdes protocols also uses dpmac. Also, fix lane protocol parsing logic to consider both XFIs and SGMIIs. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-04 06:55:52 +00:00
int xfi_dpmac[XFI8 + 1];
int sgmii_dpmac[SGMII16 + 1];
#endif
arm: fsl-layerscape: Move QSGMII wriop_init to SoC file MAC number used per QSGMII is not fixed. It may wary from SoC to SoC. So move QSGMII wriop_init_dpmac() to SoC file. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:00 +00:00
__weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
{
return;
}
armv8: ls1088a: Add NXP LS1088A SoC support LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-31 10:42:53 +00:00
/*
*The return value of this func is the serdes protocol used.
*Typically this function is called number of times depending
*upon the number of serdes blocks in the Silicon.
*Zero is used to denote that no serdes was enabled,
*this is the case when golden RCW was used where DPAA2 bring was
*intentionally removed to achieve boot to prompt
*/
__weak int serdes_get_number(int serdes, int cfg)
{
return cfg;
}
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
int is_serdes_configured(enum srds_prtcl device)
{
int ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
fsl: serdes: ensure accessing the initialized maps of serdes protocol Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-08-02 11:03:22 +00:00
if (!serdes1_prtcl_map[NONE])
fsl_serdes_init();
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
ret |= serdes1_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
fsl: serdes: ensure accessing the initialized maps of serdes protocol Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-08-02 11:03:22 +00:00
if (!serdes2_prtcl_map[NONE])
fsl_serdes_init();
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
ret |= serdes2_prtcl_map[device];
#endif
return !!ret;
}
int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
u32 cfg = 0;
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
int i;
switch (sd) {
#ifdef CONFIG_SYS_FSL_SRDS_1
case FSL_SRDS_1:
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
cfg &= FSL_CHASSIS3_SRDS1_PRTCL_MASK;
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
break;
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
case FSL_SRDS_2:
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
cfg &= FSL_CHASSIS3_SRDS2_PRTCL_MASK;
cfg >>= FSL_CHASSIS3_SRDS2_PRTCL_SHIFT;
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
break;
#endif
default:
printf("invalid SerDes%d\n", sd);
break;
}
armv8: ls1088a: Add NXP LS1088A SoC support LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-31 10:42:53 +00:00
cfg = serdes_get_number(sd, cfg);
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
/* Is serdes enabled at all? */
if (cfg == 0)
return -ENODEV;
for (i = 0; i < SRDS_MAX_LANES; i++) {
if (serdes_get_prtcl(sd, cfg, i) == device)
return i;
}
return -ENODEV;
}
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
u32 sd_prctl_shift, u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 cfg;
int lane;
fsl: serdes: ensure accessing the initialized maps of serdes protocol Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-08-02 11:03:22 +00:00
if (serdes_prtcl_map[NONE])
return;
fsl_*_serdes.c: Modify memset call in serdes_init GCC 5.x does not like sizeof(array_variable) and errors out. Change these calls to be instead sizeof(u8) (as that's what serdes_prtcl_map is) * SERDES_PRCTL_COUNT (the number of array elements). Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-28 13:04:41 +00:00
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
cfg >>= sd_prctl_shift;
armv8: ls1088a: Add NXP LS1088A SoC support LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-31 10:42:53 +00:00
cfg = serdes_get_number(sd, cfg);
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
if (!is_serdes_prtcl_valid(sd, cfg))
printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
driver/ldpaa: Add support of WRIOP static data structure Wire rate IO Processor (WRIOP) provide support of receive and transmit ethernet frames from the ethernet MAC. Here Each WRIOP block supports upto 64 DPMACs. Create a house keeping data structure to support upto 16 DPMACs and store external phy related information. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:22 +00:00
else {
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
serdes_prtcl_map[lane_prtcl] = 1;
armv8: ls2080aqds: Add support for SD boot Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-05 10:12:29 +00:00
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info Every QSGMII SerDes Protocol usage 4 MACs. So add/repeat QSGMII information for 4 MACs in dpmac_info strucuture. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-07 12:31:26 +00:00
switch (lane_prtcl) {
case QSGMII_A:
case QSGMII_B:
case QSGMII_C:
case QSGMII_D:
arm: fsl-layerscape: Move QSGMII wriop_init to SoC file MAC number used per QSGMII is not fixed. It may wary from SoC to SoC. So move QSGMII wriop_init_dpmac() to SoC file. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:00 +00:00
wriop_init_dpmac_qsgmii(sd, (int)lane_prtcl);
armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info Every QSGMII SerDes Protocol usage 4 MACs. So add/repeat QSGMII information for 4 MACs in dpmac_info strucuture. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-07 12:31:26 +00:00
break;
default:
armv8: lsch3: Fix lane protocol parsing logic Current implementation only consider SGMIIs for dpmac initialization. XFI serdes protocols also uses dpmac. Also, fix lane protocol parsing logic to consider both XFIs and SGMIIs. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-04 06:55:52 +00:00
if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8)
wriop_init_dpmac(sd,
xfi_dpmac[lane_prtcl],
(int)lane_prtcl);
armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info Every QSGMII SerDes Protocol usage 4 MACs. So add/repeat QSGMII information for 4 MACs in dpmac_info strucuture. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-07 12:31:26 +00:00
if (lane_prtcl >= SGMII1 &&
armv8: lsch3: Fix lane protocol parsing logic Current implementation only consider SGMIIs for dpmac initialization. XFI serdes protocols also uses dpmac. Also, fix lane protocol parsing logic to consider both XFIs and SGMIIs. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-04 06:55:52 +00:00
lane_prtcl <= SGMII16)
wriop_init_dpmac(sd, sgmii_dpmac[
lane_prtcl],
armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info Every QSGMII SerDes Protocol usage 4 MACs. So add/repeat QSGMII information for 4 MACs in dpmac_info strucuture. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-07 12:31:26 +00:00
(int)lane_prtcl);
break;
}
driver/ldpaa: Add support of WRIOP static data structure Wire rate IO Processor (WRIOP) provide support of receive and transmit ethernet frames from the ethernet MAC. Here Each WRIOP block supports upto 64 DPMACs. Create a house keeping data structure to support upto 16 DPMACs and store external phy related information. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:22 +00:00
#endif
}
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
}
fsl: serdes: ensure accessing the initialized maps of serdes protocol Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-08-02 11:03:22 +00:00
/* Set the first element to indicate serdes has been initialized */
serdes_prtcl_map[NONE] = 1;
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
}
armv8: lsch3: Add serdes and DDR voltage setup Adds SERDES voltage and reset SERDES lanes API and makes enable/disable DDR controller support 0.9V API common. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:43:00 +00:00
__weak int get_serdes_volt(void)
{
return -1;
}
__weak int set_serdes_volt(int svdd)
{
return -1;
}
#define LNAGCR0_RT_RSTB 0x00600000
#define RSTCTL_RESET_MASK 0x000000E0
#define RSTCTL_RSTREQ 0x80000000
#define RSTCTL_RST_DONE 0x40000000
#define RSTCTL_RSTERR 0x20000000
#define RSTCTL_SDEN 0x00000020
#define RSTCTL_SDRST_B 0x00000040
#define RSTCTL_PLLRST_B 0x00000080
#define TCALCR_CALRST_B 0x08000000
struct serdes_prctl_info {
u32 id;
u32 mask;
u32 shift;
};
struct serdes_prctl_info srds_prctl_info[] = {
#ifdef CONFIG_SYS_FSL_SRDS_1
{.id = 1,
.mask = FSL_CHASSIS3_SRDS1_PRTCL_MASK,
.shift = FSL_CHASSIS3_SRDS1_PRTCL_SHIFT
},
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
{.id = 2,
.mask = FSL_CHASSIS3_SRDS2_PRTCL_MASK,
.shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT
},
#endif
{} /* NULL ENTRY */
};
static int get_serdes_prctl_info_idx(u32 serdes_id)
{
int pos = 0;
struct serdes_prctl_info *srds_info;
/* loop until NULL ENTRY defined by .id=0 */
for (srds_info = srds_prctl_info; srds_info->id != 0;
srds_info++, pos++) {
if (srds_info->id == serdes_id)
return pos;
}
return -1;
}
static void do_enabled_lanes_reset(u32 serdes_id, u32 cfg,
struct ccsr_serdes __iomem *serdes_base,
bool cmplt)
{
int i, pos;
u32 cfg_tmp;
pos = get_serdes_prctl_info_idx(serdes_id);
if (pos == -1) {
printf("invalid serdes_id %d\n", serdes_id);
return;
}
cfg_tmp = cfg & srds_prctl_info[pos].mask;
cfg_tmp >>= srds_prctl_info[pos].shift;
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
if (cmplt)
setbits_le32(&serdes_base->lane[i].gcr0,
LNAGCR0_RT_RSTB);
else
clrbits_le32(&serdes_base->lane[i].gcr0,
LNAGCR0_RT_RSTB);
}
}
static void do_pll_reset(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
clrbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RESET_MASK);
udelay(1);
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RSTREQ);
}
udelay(1);
}
static void do_rx_tx_cal_reset(struct ccsr_serdes __iomem *serdes_base)
{
clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
}
static void do_rx_tx_cal_reset_comp(u32 cfg, int i,
struct ccsr_serdes __iomem *serdes_base)
{
if (!(cfg == 0x3 && i == 1)) {
udelay(1);
setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
}
udelay(1);
}
static void do_pll_reset_done(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
u32 reg = 0;
for (i = 0; i < 2; i++) {
reg = in_le32(&serdes_base->bank[i].pllcr0);
if (!(cfg & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RST_DONE);
}
}
}
static void do_serdes_enable(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_SDEN);
udelay(1);
setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_PLLRST_B);
udelay(1);
/* Take the Rx/Tx calibration out of reset */
do_rx_tx_cal_reset_comp(cfg, i, serdes_base);
}
}
static void do_pll_lock(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
u32 reg = 0;
for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
/* if the PLL is not locked, set RST_ERR */
reg = in_le32(&serdes_base->bank[i].pllcr0);
if (!((reg >> 23) & 0x1)) {
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RSTERR);
} else {
udelay(1);
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_SDRST_B);
udelay(1);
}
}
}
int setup_serdes_volt(u32 svdd)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
struct ccsr_serdes __iomem *serdes1_base =
(void *)CONFIG_SYS_FSL_LSCH3_SERDES_ADDR;
u32 cfg_rcwsrds1 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
#ifdef CONFIG_SYS_FSL_SRDS_2
struct ccsr_serdes __iomem *serdes2_base =
(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000);
u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
#endif
u32 cfg_tmp;
int svdd_cur, svdd_tar;
int ret = 1;
/* Only support switch SVDD to 900mV */
if (svdd != 900)
return -EINVAL;
/* Scale up to the LTC resolution is 1/4096V */
svdd = (svdd * 4096) / 1000;
svdd_tar = svdd;
svdd_cur = get_serdes_volt();
if (svdd_cur < 0)
return -EINVAL;
debug("%s: current SVDD: %x; target SVDD: %x\n",
__func__, svdd_cur, svdd_tar);
if (svdd_cur == svdd_tar)
return 0;
/* Put the all enabled lanes in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, false);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false);
#endif
/* Put the all enabled PLL in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_pll_reset(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_pll_reset(cfg_tmp, serdes2_base);
#endif
/* Put the Rx/Tx calibration into reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_rx_tx_cal_reset(serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
do_rx_tx_cal_reset(serdes2_base);
#endif
ret = set_serdes_volt(svdd);
if (ret < 0) {
printf("could not change SVDD\n");
ret = -1;
}
/* For each PLL that’s not disabled via RCW enable the SERDES */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_serdes_enable(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_serdes_enable(cfg_tmp, serdes2_base);
#endif
/* Wait for at at least 625us, ensure the PLLs being reset are locked */
udelay(800);
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_pll_lock(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_pll_lock(cfg_tmp, serdes2_base);
#endif
/* Take the all enabled lanes out of reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true);
#endif
/* For each PLL being reset, and achieved PLL lock set RST_DONE */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_pll_reset_done(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_pll_reset_done(cfg_tmp, serdes2_base);
#endif
return ret;
}
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
void fsl_serdes_init(void)
{
armv8: ls2080aqds: Add support for SD boot Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-05 10:12:29 +00:00
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
armv8: lsch3: Fix lane protocol parsing logic Current implementation only consider SGMIIs for dpmac initialization. XFI serdes protocols also uses dpmac. Also, fix lane protocol parsing logic to consider both XFIs and SGMIIs. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-04 06:55:52 +00:00
int i , j;
for (i = XFI1, j = 1; i <= XFI8; i++, j++)
xfi_dpmac[i] = j;
for (i = SGMII1, j = 1; i <= SGMII16; i++, j++)
sgmii_dpmac[i] = j;
#endif
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
#ifdef CONFIG_SYS_FSL_SRDS_1
serdes_init(FSL_SRDS_1,
CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
FSL_CHASSIS3_SRDS1_REGSR,
FSL_CHASSIS3_SRDS1_PRTCL_MASK,
FSL_CHASSIS3_SRDS1_PRTCL_SHIFT,
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
serdes1_prtcl_map);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
serdes_init(FSL_SRDS_2,
CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-15 15:10:35 +00:00
FSL_CHASSIS3_SRDS2_REGSR,
FSL_CHASSIS3_SRDS2_PRTCL_MASK,
FSL_CHASSIS3_SRDS2_PRTCL_SHIFT,
armv8: Add SerDes framework for Layerscape Architecture Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-21 02:28:16 +00:00
serdes2_prtcl_map);
#endif
}
Reference in a new issue Copy permalink