u-boot/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi

59 lines
1.2 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LS1028A-QDS device tree fragment for RCW 7777
*
* Copyright 2019-2021 NXP Semiconductors
*/
/*
* This setup is using a SCH-30841 card with AQR412 10G quad PHY.
*
* Switch ports are mapped 1:1 to AQR412 card ports seated in slot 1.
* Bottom port is port 0.
* Note that this is only usable for:
* - QDS boards WITHOUT lane B rework,
* - AQR412 card WITHOUT lane A -> lane C rework
*
* The following DTS assumes DIP SW5[1-3] = 000b.
*/
&slot1 {
#include "fsl-sch-30841.dtsi"
};
&enetc2 {
status = "okay";
};
&mscc_felix {
status = "okay";
};
&mscc_felix_port0 {
status = "okay";
phy-mode = "sgmii-2500";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "sgmii-2500";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "sgmii-2500";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "sgmii-2500";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
};
&mscc_felix_port4 {
ethernet = <&enetc2>;
status = "okay";
};