u-boot/arch/arm/mach-snapdragon/clock-apq8096.c

96 lines
2.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Clock drivers for Qualcomm APQ8096
*
* (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
*
* Based on Little Kernel driver, simplified
*/
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include "clock-snapdragon.h"
/* GPLL0 clock control registers */
#define GPLL0_STATUS_ACTIVE BIT(30)
#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
static const struct bcr_regs sdc_regs = {
.cfg_rcgr = SDCC2_CFG_RCGR,
.cmd_rcgr = SDCC2_CMD_RCGR,
.M = SDCC2_M,
.N = SDCC2_N,
.D = SDCC2_D,
};
static const struct pll_vote_clk gpll0_vote_clk = {
.status = GPLL0_STATUS,
.status_bit = GPLL0_STATUS_ACTIVE,
.ena_vote = APCS_GPLL_ENA_VOTE,
.vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
};
static struct vote_clk gcc_blsp2_ahb_clk = {
.cbcr_reg = BLSP2_AHB_CBCR,
.ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE,
.vote_bit = BIT(15),
};
static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
{
int div = 3;
clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
CFG_CLK_SRC_GPLL0);
clk_enable_gpll0(priv->base, &gpll0_vote_clk);
clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
return rate;
}
static const struct bcr_regs uart2_regs = {
.cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR,
.cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR,
.M = BLSP2_UART2_APPS_M,
.N = BLSP2_UART2_APPS_N,
.D = BLSP2_UART2_APPS_D,
};
static int clk_init_uart(struct msm_clk_priv *priv)
{
/* Enable AHB clock */
clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk);
/* 7372800 uart block clock @ GPLL0 */
clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625,
CFG_CLK_SRC_GPLL0);
/* Vote for gpll0 clock */
clk_enable_gpll0(priv->base, &gpll0_vote_clk);
/* Enable core clk */
clk_enable_cbc(priv->base + BLSP2_UART2_APPS_CBCR);
return 0;
}
ulong msm_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
case 0: /* SDC1 */
return clk_init_sdc(priv, rate);
break;
case 4: /*UART2*/
return clk_init_uart(priv);
default:
return 0;
}
}