u-boot/arch/mips/mach-ath79/Kconfig

menu "QCA/Atheros 7xxx/9xxx platforms"
	depends on ARCH_ATH79

config SYS_SOC
	default "ath79"

config SOC_AR933X
	bool
	select MIPS_TUNE_24KC
	select ROM_EXCEPTION_VECTORS
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	help
	  This supports QCA/Atheros ar933x family SOCs.

config SOC_AR934X
	bool
	select MIPS_TUNE_74KC
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	select USB_EHCI_IS_TDI if USB_EHCI_HCD
	help
	  This supports QCA/Atheros ar934x family SOCs.

config SOC_QCA953X
	bool
	select MIPS_TUNE_24KC
	select ROM_EXCEPTION_VECTORS
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	help
	  This supports QCA/Atheros qca953x family SOCs.

config SOC_QCA956X
	bool
	select MIPS_TUNE_74KC
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	help
	  This supports QCA/Atheros qca956x family SOCs.

choice
	prompt "Board select"

config TARGET_AP121
	bool "AP121 Reference Board"
	select SOC_AR933X

config TARGET_AP143
	bool "AP143 Reference Board"
	select SOC_QCA953X

config TARGET_AP152
	bool "AP152 Reference Board"
	select SOC_QCA956X

config BOARD_TPLINK_WDR4300
	bool "TP-Link WDR4300 Board"
	select SOC_AR934X

endchoice

source "board/qca/ap121/Kconfig"
source "board/qca/ap143/Kconfig"
source "board/qca/ap152/Kconfig"
source "board/tplink/wdr4300/Kconfig"

endmenu
mips: add base support for QCA/Atheros ath79 SOCs This patch add some common code for QCA/Atheros ath79 SOCs such as DDR tuning, chip reset and CPU detection. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:52 +00:00			`menu "QCA/Atheros 7xxx/9xxx platforms"`
			`depends on ARCH_ATH79`

			`config SYS_SOC`
			`default "ath79"`

mips: ath79: add support for AR933x SOCs This patch enable work for ar933x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:53 +00:00			`config SOC_AR933X`
			`bool`
Kconfig: Sort bool, default, select and imply options Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> 2018-07-23 13:55:15 +00:00			`select MIPS_TUNE_24KC`
			`select ROM_EXCEPTION_VECTORS`
mips: ath79: add support for AR933x SOCs This patch enable work for ar933x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:53 +00:00			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
			`help`
			`This supports QCA/Atheros ar933x family SOCs.`

mips: ath79: Add AR934x support Add support for the Atheros AR934x WiSoCs. This patchs adds complete system init, including PLL and DRAM init, both of which happen from full C environment, since the AR934x has proper SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:40 +00:00			`config SOC_AR934X`
			`bool`
Kconfig: Sort bool, default, select and imply options Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> 2018-07-23 13:55:15 +00:00			`select MIPS_TUNE_74KC`
mips: ath79: Add AR934x support Add support for the Atheros AR934x WiSoCs. This patchs adds complete system init, including PLL and DRAM init, both of which happen from full C environment, since the AR934x has proper SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:40 +00:00			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz> 2021-10-09 13:27:35 +00:00			`select USB_EHCI_IS_TDI if USB_EHCI_HCD`
mips: ath79: Add AR934x support Add support for the Atheros AR934x WiSoCs. This patchs adds complete system init, including PLL and DRAM init, both of which happen from full C environment, since the AR934x has proper SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:40 +00:00			`help`
			`This supports QCA/Atheros ar934x family SOCs.`

mips: ath79: add support for QCA953x SOCs This patch enable work for qca953x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:54 +00:00			`config SOC_QCA953X`
			`bool`
Kconfig: Sort bool, default, select and imply options Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> 2018-07-23 13:55:15 +00:00			`select MIPS_TUNE_24KC`
			`select ROM_EXCEPTION_VECTORS`
mips: ath79: add support for QCA953x SOCs This patch enable work for qca953x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:54 +00:00			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
			`help`
			`This supports QCA/Atheros qca953x family SOCs.`

mips: add initial support for qca956x referenced board QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup 2019-03-16 01:24:44 +00:00			`config SOC_QCA956X`
			`bool`
			`select MIPS_TUNE_74KC`
			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
			`help`
			`This supports QCA/Atheros qca956x family SOCs.`

mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 08:59:59 +00:00			`choice`
			`prompt "Board select"`

			`config TARGET_AP121`
			`bool "AP121 Reference Board"`
			`select SOC_AR933X`

mips: ath79: add AP143 reference board This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 09:00:00 +00:00			`config TARGET_AP143`
			`bool "AP143 Reference Board"`
			`select SOC_QCA953X`

mips: add initial support for qca956x referenced board QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup 2019-03-16 01:24:44 +00:00			`config TARGET_AP152`
			`bool "AP152 Reference Board"`
			`select SOC_QCA956X`

mips: ath79: Add support for TPLink WDR4300 Add support for the TPLink WDR4300 router, which is based on the AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported on this system as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:41 +00:00			`config BOARD_TPLINK_WDR4300`
			`bool "TP-Link WDR4300 Board"`
			`select SOC_AR934X`

mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 08:59:59 +00:00			`endchoice`

			`source "board/qca/ap121/Kconfig"`
mips: ath79: add AP143 reference board This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 09:00:00 +00:00			`source "board/qca/ap143/Kconfig"`
mips: add initial support for qca956x referenced board QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup 2019-03-16 01:24:44 +00:00			`source "board/qca/ap152/Kconfig"`
mips: ath79: Add support for TPLink WDR4300 Add support for the TPLink WDR4300 router, which is based on the AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported on this system as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:41 +00:00			`source "board/tplink/wdr4300/Kconfig"`
mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 08:59:59 +00:00
mips: add base support for QCA/Atheros ath79 SOCs This patch add some common code for QCA/Atheros ath79 SOCs such as DDR tuning, chip reset and CPU detection. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:52 +00:00			`endmenu`