u-boot/include/configs/octeon_common.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2019-2020
 * Marvell <www.marvell.com>
 */

#ifndef __OCTEON_COMMON_H__
#define __OCTEON_COMMON_H__

#if defined(CONFIG_RAM_OCTEON)
#define CFG_SYS_INIT_SP_OFFSET	0x20180000
#else
/* No DDR init -> run in L2 cache with limited resources */
#define CFG_SYS_INIT_SP_OFFSET	0x00180000
#endif

#define CFG_SYS_SDRAM_BASE		0xffffffff80000000

#endif /* __OCTEON_COMMON_H__ */
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de> 2020-06-30 10:08:58 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
			`/*`
			`* Copyright (C) 2019-2020`
			`* Marvell <www.marvell.com>`
			`*/`

			`#ifndef __OCTEON_COMMON_H__`
			`#define __OCTEON_COMMON_H__`

mips: octeon: octeon_ebb7304: Add DDR4 support This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: Stefan Roese <sr@denx.de> 2020-09-02 06:29:10 +00:00			`#if defined(CONFIG_RAM_OCTEON)`
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2022-11-16 18:10:41 +00:00			`#define CFG_SYS_INIT_SP_OFFSET 0x20180000`
mips: octeon: octeon_ebb7304: Add DDR4 support This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: Stefan Roese <sr@denx.de> 2020-09-02 06:29:10 +00:00			`#else`
			`/* No DDR init -> run in L2 cache with limited resources */`
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2022-11-16 18:10:41 +00:00			`#define CFG_SYS_INIT_SP_OFFSET 0x00180000`
mips: octeon: octeon_ebb7304: Add DDR4 support This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: Stefan Roese <sr@denx.de> 2020-09-02 06:29:10 +00:00			`#endif`

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2022-11-16 18:10:37 +00:00			`#define CFG_SYS_SDRAM_BASE 0xffffffff80000000`
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de> 2020-06-30 10:08:58 +00:00
			`#endif /* __OCTEON_COMMON_H__ */`