u-boot/arch/x86/cpu/queensbay/Kconfig

80 lines
2.4 KiB
Text
Raw Normal View History

#
# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
config INTEL_QUEENSBAY
bool
select HAVE_FSP
select HAVE_CMC
if INTEL_QUEENSBAY
config HAVE_FSP
bool "Add an Firmware Support Package binary"
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
to set up SDRAM and other chipset specific initialization.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config FSP_FILE
string "Firmware Support Package binary filename"
depends on HAVE_FSP
default "fsp.bin"
help
The filename of the file to use as Firmware Support Package binary
in the board directory.
config FSP_ADDR
hex "Firmware Support Package binary location"
depends on HAVE_FSP
default 0xfffc0000
help
FSP is not Position Independent Code (PIC) and the whole FSP has to
be rebased if it is placed at a location which is different from the
perferred base address specified during the FSP build. Use Intel's
Binary Configuration Tool (BCT) to do the rebase.
The default base address of 0xfffc0000 indicates that the binary must
be located at offset 0xc0000 from the beginning of a 1MB flash device.
config FSP_TEMP_RAM_ADDR
hex
default 0x2000000
help
Stack top address which is used in FspInit after DRAM is ready and
CAR is disabled.
config HAVE_CMC
bool "Add a Chipset Micro Code state machine binary"
help
Select this option to add a Chipset Micro Code state machine binary
to the resulting U-Boot image. It is a 64K data block of machine
specific code which must be put in the flash for the processor to
access when powered up before system BIOS is executed.
config CMC_FILE
string "Chipset Micro Code state machine filename"
depends on HAVE_CMC
default "cmc.bin"
help
The filename of the file to use as Chipset Micro Code state machine
binary in the board directory.
config CMC_ADDR
hex "Chipset Micro Code state machine binary location"
depends on HAVE_CMC
default 0xfffb0000
help
The location of the CMC binary is determined by a strap. It must be
put in flash at a location matching the strap-determined base address.
The default base address of 0xfffb0000 indicates that the binary must
be located at offset 0xb0000 from the beginning of a 1MB flash device.
endif