Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 05:04:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/serial/Kconfig

881 lines
28 KiB
Text
Raw Normal View History

drivers: hierarchize drivers Kconfig menu The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-25 17:46:26 +00:00
#
# Serial device configuration
#
menu "Serial drivers"
Kconfig: Migrate CONFIG_BAUDRATE Move this in to Kconfig with a default of 115200. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [trini: Run moveconfig.py, reword commit slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-17 19:34:53 +00:00
config BAUDRATE
int "Default baudrate"
default 115200
help
Select a default baudrate, where "default" has a driver-specific
meaning of either setting the baudrate for the early debug UART
in the SPL stage (most drivers) or for choosing a default baudrate
in the absence of an environment setting (serial_mxc.c).
dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port Currently the serial code assumes that there is always at least one serial port (and panics / crashes due to null pointer dereferences when there is none). This makes it impossible to use u-boot on boards where there is no (debug) serial port, because e.g. all uart pins are muxed to another function. This commit adds a CONFIG_REQUIRE_SERIAL_CONSOLE Kconfig option, which defaults to y (preserving existing behavior), which can be set to n on such boards to make them work. This commit only implements this for CONFIG_DM_SERIAL=y configs, as allowing running without a serial port for CONFIG_DM_SERIAL=n configs is non trivial, and is not necessary at this moment. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-08 15:45:18 +00:00
config REQUIRE_SERIAL_CONSOLE
bool "Require a serial port for console"
# Running without a serial console is not supported by the
# non-dm serial code
depends on DM_SERIAL
default y
help
Require a serial port for the console, and panic if none is found
during serial port initialization (default y). Set this to n on
boards which have no debug serial port whatsoever.
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07 00:02:27 +00:00
config SPECIFY_CONSOLE_INDEX
bool "Specify the port number used for console"
default y if !DM_SERIAL || (SPL && !SPL_DM_SERIAL) || \
(TPL && !TPL_DM_SERIAL)
help
In various cases, we need to specify which of the UART devices that
a board or SoC has available are to be used for the console device
in U-Boot.
dm: serial: Allow the UART driver to be dropped from the image In very very space-constrained devices even the full UART driver is too large. In this case the debug UART can still be used in some cases. Add options to enable the UART driver in SPL and U-Boot proper. Enable both options by default. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-14 04:36:58 +00:00
config SERIAL_PRESENT
bool "Provide a serial driver"
depends on DM_SERIAL
default y
help
In very space-constrained devices even the full UART driver is too
large. In this case the debug UART can still be used in some cases.
This option enables the full UART in U-Boot, so if is it disabled,
the full UART driver will be omitted, thus saving space.
config SPL_SERIAL_PRESENT
bool "Provide a serial driver in SPL"
Kconfig: Varios: Fix more SPL, TPL dependencies Several options are presenting themselves on a various boards where the options are clearly not used. (ie, SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. In some instances, I wasn't sure of DM was required, so I simply made them SPL or TPL. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-24 18:50:34 +00:00
depends on DM_SERIAL && SPL
dm: serial: Allow the UART driver to be dropped from the image In very very space-constrained devices even the full UART driver is too large. In this case the debug UART can still be used in some cases. Add options to enable the UART driver in SPL and U-Boot proper. Enable both options by default. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-14 04:36:58 +00:00
default y
help
In very space-constrained devices even the full UART driver is too
large. In this case the debug UART can still be used in some cases.
This option enables the full UART in SPL, so if is it disabled,
the full UART driver will be omitted, thus saving space.
serial: Allow serial to be absent in TPL At present this option applies to SPL, but it should be available in TPL also, and separately. Change to using CONFIG_IS_ENABLED(), add a new Kconfig option and fix up hang(). Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:20 +00:00
config TPL_SERIAL_PRESENT
bool "Provide a serial driver in TPL"
Kconfig: Varios: Fix more SPL, TPL dependencies Several options are presenting themselves on a various boards where the options are clearly not used. (ie, SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. In some instances, I wasn't sure of DM was required, so I simply made them SPL or TPL. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-24 18:50:34 +00:00
depends on DM_SERIAL && TPL
serial: Allow serial to be absent in TPL At present this option applies to SPL, but it should be available in TPL also, and separately. Change to using CONFIG_IS_ENABLED(), add a new Kconfig option and fix up hang(). Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:20 +00:00
default y
help
In very space-constrained devices even the full UART driver is too
large. In this case the debug UART can still be used in some cases.
This option enables the full UART in TPL, so if is it disabled,
the full UART driver will be omitted, thus saving space.
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07 00:02:27 +00:00
# Logic to allow us to use the imply keyword to set what the default port
# should be. The default is otherwise 1.
config CONS_INDEX_0
bool
config CONS_INDEX_2
bool
config CONS_INDEX_3
bool
config CONS_INDEX_4
bool
config CONS_INDEX_5
bool
config CONS_INDEX_6
bool
sunxi: Convert CONS_INDEX to Kconfig Convert the CONS_INDEX configuration to Kconfig. Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not needed anymore. Default value is 1 except for sun5i (equals 2) and sun8i (equals 5). Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:11 +00:00
config CONS_INDEX
int "UART used for console"
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07 00:02:27 +00:00
depends on SPECIFY_CONSOLE_INDEX
range 0 6
default 0 if CONS_INDEX_0
default 2 if CONS_INDEX_2
default 3 if CONS_INDEX_3
default 4 if CONS_INDEX_4
default 5 if CONS_INDEX_5
default 6 if CONS_INDEX_6
sunxi: Convert CONS_INDEX to Kconfig Convert the CONS_INDEX configuration to Kconfig. Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not needed anymore. Default value is 1 except for sun5i (equals 2) and sun8i (equals 5). Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:11 +00:00
default 1
help
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07 00:02:27 +00:00
Set this to match the UART number of the serial console.
sunxi: Convert CONS_INDEX to Kconfig Convert the CONS_INDEX configuration to Kconfig. Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not needed anymore. Default value is 1 except for sun5i (equals 2) and sun8i (equals 5). Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:11 +00:00
dm: add entries to Kconfig Create entries of CONFIG_DM, CONFIG_DM_SERIAL, CONFIG_DM_GPIO and CONFIG_DM_SPI. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 13:26:09 +00:00
config DM_SERIAL
bool "Enable Driver Model for serial drivers"
depends on DM
Add dependencies for MALLOC_F and OF_LIBFDT Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2019-12-18 02:40:09 +00:00
select SYS_MALLOC_F
dm: add entries to Kconfig Create entries of CONFIG_DM, CONFIG_DM_SERIAL, CONFIG_DM_GPIO and CONFIG_DM_SPI. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 13:26:09 +00:00
help
dm: Expand and complete Kconfig in drivers/ Expand the help messages for each driver. Add missing Kconfig for I2C, SPI flash and thermal. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-06 04:41:35 +00:00
Enable driver model for serial. This replaces
drivers/serial/serial.c with the serial uclass, which
implements serial_putc() etc. The uclass interface is
defined in include/serial.h.
serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 13:26:11 +00:00
serial: serial-uclass: Add generic serial RX buffer support Pasting longer lines into the U-Boot console prompt sometimes leads to characters missing. One problem here is the small 16-byte FIFO of the legacy NS16550 UART, e.g. on x86 platforms. This patch now introduces a Kconfig option to enable RX buffer support for all DM based serial drivers. With this option enabled, I was able paste really long lines into the U-Boot console, without any characters missing. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-16 15:37:16 +00:00
config SERIAL_RX_BUFFER
bool "Enable RX buffer for serial input"
depends on DM_SERIAL
help
Enable RX buffer support for the serial driver. This enables
pasting longer strings, even when the RX FIFO of the UART is
not big enough (e.g. 16 bytes on the normal NS16550).
config SERIAL_RX_BUFFER_SIZE
int "RX buffer size"
depends on SERIAL_RX_BUFFER
default 256
help
The size of the RX buffer (needs to be power of 2)
serial: Make full device search optional Commit 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails") added code to search for more serial devices if the default one was not probed correctly. Unfortunately, that breaks omap3_evm. So while investigating why that is the case, let's disable the full search for everyone but bcm283x where it is needed. Fixes: 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails") Reported-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-29 12:57:20 +00:00
config SERIAL_SEARCH_ALL
bool "Search for serial devices after default one failed"
depends on DM_SERIAL
help
The serial subsystem only searches for a single serial device
that was instantiated, but does not check whether it was probed
correctly. With this option set, we make successful probing
mandatory and search for fallback serial devices if the default
device does not work.
If unsure, say N.
dm: serial: Allow driver-model serial to be disabled for TPL Add separate enable/disable controls for driver-model serial. While this is generally enabled in SPL it may not be in TPL, since serial output can be obtained with the debug UART with minimal code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-02 15:50:32 +00:00
config SPL_DM_SERIAL
serial, kconfig: fix menutext fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL. Both have the same text as DM_SERIAL, which is confusing. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-06-21 04:23:10 +00:00
bool "Enable Driver Model for serial drivers in SPL"
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07 00:02:27 +00:00
depends on DM_SERIAL && SPL_DM
Add dependencies for MALLOC_F and OF_LIBFDT Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2019-12-18 02:40:09 +00:00
select SYS_SPL_MALLOC_F
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07 00:02:27 +00:00
default y
dm: serial: Allow driver-model serial to be disabled for TPL Add separate enable/disable controls for driver-model serial. While this is generally enabled in SPL it may not be in TPL, since serial output can be obtained with the debug UART with minimal code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-02 15:50:32 +00:00
help
Enable driver model for serial in SPL. This replaces
drivers/serial/serial.c with the serial uclass, which
implements serial_putc() etc. The uclass interface is
defined in include/serial.h.
config TPL_DM_SERIAL
serial, kconfig: fix menutext fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL. Both have the same text as DM_SERIAL, which is confusing. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-06-21 04:23:10 +00:00
bool "Enable Driver Model for serial drivers in TPL"
Kconfig: make TPL_DM_SERIAL depend on TPL_DM This missing dependency seems like an oversight, since all other TPL_DM_* options have it. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-10 16:23:55 +00:00
depends on DM_SERIAL && TPL_DM
Add dependencies for MALLOC_F and OF_LIBFDT Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2019-12-18 02:40:09 +00:00
select SYS_TPL_MALLOC_F
dm: serial: Allow driver-model serial to be disabled for TPL Add separate enable/disable controls for driver-model serial. While this is generally enabled in SPL it may not be in TPL, since serial output can be obtained with the debug UART with minimal code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-02 15:50:32 +00:00
default y if TPL && DM_SERIAL
help
Enable driver model for serial in TPL. This replaces
drivers/serial/serial.c with the serial uclass, which
implements serial_putc() etc. The uclass interface is
defined in include/serial.h.
serial: Support an early UART for debugging This came up in a discussion on the mailing list here: https://patchwork.ozlabs.org/patch/384613/ My concerns at the time were: - it doesn't need to be written in assembler - it doesn't need to be ARM-specific This patch provides a possible alternative. It works by allowing any serial driver to export one init function and provide a putc() function. These can be used to output debug data before the real serial driver is available. This implementation does not depend on driver model, and it is possible for it to operate without a stack on some architectures (e.g. PowerPC, ARM). It provides the same features as the ARM-specific debug.S but with more UART and architecture support. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:07 +00:00
config DEBUG_UART
bool "Enable an early debug UART for debugging"
help
The debug UART is intended for use very early in U-Boot to debug
problems when an ICE or other debug mechanism is not available.
To use it you should:
- Make sure your UART supports this interface
- Enable CONFIG_DEBUG_UART
- Enable the CONFIG for your UART to tell it to provide this interface
(e.g. CONFIG_DEBUG_UART_NS16550)
- Define the required settings as needed (see below)
- Call debug_uart_init() before use
- Call debug_uart_putc() to output a character
Depending on your platform it may be possible to use this UART before
a stack is available.
If your UART does not support this interface you can probably add
support quite easily. Remember that you cannot use driver model and
it is preferred to use no stack.
You must not use this UART once driver model is working and the
serial drivers are up and running (done in serial_init()). Otherwise
the drivers may conflict and you will get strange output.
serial: ns16550: Support debug UART Add debug UART functions to permit ns16550 to provide an early debug UART. Try to avoid using the stack so that this can be called from assembler before a stack is set up (at least on ARM and PowerPC). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:09 +00:00
choice
prompt "Select which UART will provide the debug UART"
depends on DEBUG_UART
debug_uart: restore ns16550 as default Since commit 220e8021af96 ("nios2: convert altera_jtag_uart to driver model"), the default debug uart was changed. Most people use ns16550 UART, so restore it as default. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19 13:48:03 +00:00
default DEBUG_UART_NS16550
serial: ns16550: Support debug UART Add debug UART functions to permit ns16550 to provide an early debug UART. Try to avoid using the stack so that this can be called from assembler before a stack is set up (at least on ARM and PowerPC). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:09 +00:00
nios2: convert altera_jtag_uart to driver model Convert altera_jtag_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 23:36:37 +00:00
config DEBUG_UART_ALTERA_JTAGUART
bool "Altera JTAG UART"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on ALTERA_JTAG_UART
nios2: convert altera_jtag_uart to driver model Convert altera_jtag_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 23:36:37 +00:00
help
Select this to enable a debug UART using the altera_jtag_uart driver.
You will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
nios2: convert altera_uart to driver model Convert altera_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-21 13:26:54 +00:00
config DEBUG_UART_ALTERA_UART
bool "Altera UART"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on ALTERA_UART
nios2: convert altera_uart to driver model Convert altera_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-21 13:26:54 +00:00
help
Select this to enable a debug UART using the altera_uart driver.
You will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
drivers: serial: add serial driver for ar933x SOC This patch add support for ar933x serial. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-16 08:59:57 +00:00
config DEBUG_UART_AR933X
bool "QCA/Atheros ar933x"
depends on AR933X_UART
help
Select this to enable a debug UART using the ar933x uart driver.
You will need to provide parameters to make this work. The
driver will be available until the real driver model serial is
running.
serial/serial_arc: Implement debug serial Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-21 13:42:07 +00:00
config DEBUG_ARC_SERIAL
bool "ARC UART"
depends on ARC_SERIAL
help
Select this to enable a debug UART using the ARC UART driver.
You will need to provide parameters to make this work. The
driver will be available until the real driver model serial is
running.
serial: atmel_usart: Support enable an early debug UART Add support to enable an early debug UART for debugging. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-17 01:49:55 +00:00
config DEBUG_UART_ATMEL
bool "Atmel USART"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on ATMEL_USART
serial: atmel_usart: Support enable an early debug UART Add support to enable an early debug UART for debugging. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-17 01:49:55 +00:00
help
Select this to enable a debug UART using the atmel usart driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
serial: add serial driver for BCM6345 It is based on linux/drivers/tty/serial/bcm63xx_uart.c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-24 22:39:16 +00:00
config DEBUG_UART_BCM6345
bool "BCM6345 UART"
depends on BCM6345_SERIAL
help
Select this to enable a debug UART on BCM6345 SoCs. You
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
serial: ns16550: Support debug UART Add debug UART functions to permit ns16550 to provide an early debug UART. Try to avoid using the stack so that this can be called from assembler before a stack is set up (at least on ARM and PowerPC). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:09 +00:00
config DEBUG_UART_NS16550
bool "ns16550"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on SYS_NS16550
serial: ns16550: Support debug UART Add debug UART functions to permit ns16550 to provide an early debug UART. Try to avoid using the stack so that this can be called from assembler before a stack is set up (at least on ARM and PowerPC). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:09 +00:00
help
Select this to enable a debug UART using the ns16550 driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
efi: Add a serial driver Add a serial driver which makes use of EFI's console in/out service. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested on Intel Crown Bay and QEMU Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-04 18:33:40 +00:00
config DEBUG_EFI_CONSOLE
bool "EFI"
depends on EFI_APP
help
Select this to enable a debug console which calls back to EFI to
output to the console. This can be useful for early debugging of
U-Boot when running on top of EFI (Extensive Firmware Interface).
This is a type of BIOS used by PCs.
exynos: Add debug UART support for Samsung S5P serial Add a debug UART implementation for this serial driver. It does not set up pinmux automatically - this must be done before calling debug_uart_init(). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-03 00:15:54 +00:00
config DEBUG_UART_S5P
bool "Samsung S5P"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on ARCH_EXYNOS || ARCH_S5PC1XX
exynos: Add debug UART support for Samsung S5P serial Add a debug UART implementation for this serial driver. It does not set up pinmux automatically - this must be done before calling debug_uart_init(). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-03 00:15:54 +00:00
help
Select this to enable a debug UART using the serial_s5p driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 06:30:16 +00:00
config DEBUG_UART_MESON
bool "Amlogic Meson"
depends on MESON_SERIAL
help
Select this to enable a debug UART using the serial_meson driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
serial: uartlite: Add support for debug console Add support for debug console. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-14 15:55:10 +00:00
config DEBUG_UART_UARTLITE
bool "Xilinx Uartlite"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on XILINX_UARTLITE
serial: uartlite: Add support for debug console Add support for debug console. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-14 15:55:10 +00:00
help
Select this to enable a debug UART using the serial_uartlite driver.
You will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
serial: dcc: Move driver to DM Enabling this driver requires some DT changes. Adding DCC to root or main bus: dcc: dcc { compatible = "arm,dcc"; u-boot,dm-pre-reloc; }; Extend alias list to link DCC: serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; Change stdout-path to point to dcc port. stdout-path = "serial2:115200n8"; Also add support for debug uart to help with early debug. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-23 09:02:28 +00:00
config DEBUG_UART_ARM_DCC
bool "ARM DCC"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on ARM_DCC
serial: dcc: Move driver to DM Enabling this driver requires some DT changes. Adding DCC to root or main bus: dcc: dcc { compatible = "arm,dcc"; u-boot,dm-pre-reloc; }; Extend alias list to link DCC: serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; Change stdout-path to point to dcc port. stdout-path = "serial2:115200n8"; Also add support for debug uart to help with early debug. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-23 09:02:28 +00:00
help
Select this to enable a debug UART using the ARM JTAG DCC port.
The DCC port can be used for very early debugging and doesn't require
any additional setting like address/baudrate/clock. On systems without
any serial interface this is the easiest way how to get console.
Every ARM core has own DCC port which is the part of debug interface.
This port is available at least on ARMv6, ARMv7, ARMv8 and XScale
architectures.
serial: Add serial_mvebu_a3700 for Armada 3700 SoC The Armada 3700's UART is a simple serial port. It has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO integrated. This patch adds support for this UART including the DEBUG UART functions for very early debug output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-05-17 14:36:00 +00:00
config DEBUG_MVEBU_A3700_UART
bool "Marvell Armada 3700"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on MVEBU_A3700_UART
serial: Add serial_mvebu_a3700 for Armada 3700 SoC The Armada 3700's UART is a simple serial port. It has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO integrated. This patch adds support for this UART including the DEBUG UART functions for very early debug output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-05-17 14:36:00 +00:00
help
Select this to enable a debug UART using the serial_mvebu driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
arm: zynq: Support the debug UART Add support for the debug UART to assist with early debugging. Enable it for Zybo as an example. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-10-18 01:41:22 +00:00
config DEBUG_UART_ZYNQ
bool "Xilinx Zynq"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on ZYNQ_SERIAL
arm: zynq: Support the debug UART Add support for the debug UART to assist with early debugging. Enable it for Zybo as an example. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-10-18 01:41:22 +00:00
help
serial: zynq: Fix incorrect reference to s5p driver Remove this c&p error from s5p driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-01 13:29:34 +00:00
Select this to enable a debug UART using the serial_zynq driver. You
arm: zynq: Support the debug UART Add support for the debug UART to assist with early debugging. Enable it for Zybo as an example. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-10-18 01:41:22 +00:00
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
sparc: leon3: Add debug_uart support to LEON3 serial driver. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-10-29 10:55:34 +00:00
config DEBUG_UART_APBUART
depends on LEON3
bool "Gaisler APBUART"
help
Select this to enable a debug UART using the serial_leon3 driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-14 16:54:24 +00:00
config DEBUG_UART_PL010
bool "pl010"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on PL01X_SERIAL
arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-14 16:54:24 +00:00
help
Select this to enable a debug UART using the pl01x driver with the
PL010 UART type. You will need to provide parameters to make this
work. The driver will be available until the real driver model
serial is running.
config DEBUG_UART_PL011
bool "pl011"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on PL011_SERIAL
arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-14 16:54:24 +00:00
help
Select this to enable a debug UART using the pl01x driver with the
PL011 UART type. You will need to provide parameters to make this
work. The driver will be available until the real driver model
serial is running.
drivers: serial: add driver for Microchip PIC32 UART controller. This adds PIC32 UART controller support based on driver model. Signed-off-by: Paul Thacker <paul.thacker@microchip.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 10:00:14 +00:00
config DEBUG_UART_PIC32
bool "Microchip PIC32"
depends on PIC32_SERIAL
help
Select this to enable a debug UART using the serial_pic32 driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
serial: mxc: Add debug uart support Add support for the debug UART to assist with early debugging. Enable it for i.CoreM6 as an example. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-06 05:31:51 +00:00
config DEBUG_UART_MXC
bool "IMX Serial port"
depends on MXC_UART
help
Select this to enable a debug UART using the serial_mxc driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
sandbox: Add a debug UART Add support for the debug UART so that sandbox provides build testing for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 17:55:15 +00:00
config DEBUG_UART_SANDBOX
bool "sandbox"
depends on SANDBOX_SERIAL
help
Select this to enable the debug UART using the sandbox driver. This
provides basic serial output from the console without needing to
start up driver model. The driver will be available until the real
driver model serial is running.
drivers: serial: Add SiFive UART driver This patch adds SiFive UART driver. The driver is 100% DM driver and it determines input clock using clk framework. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-15 06:05:15 +00:00
config DEBUG_UART_SIFIVE
bool "SiFive UART"
serial: Fix SIFIVE debug serial dependency The commit 4cc24aeaf420 ("serial: Add missing Kconfig dependencies for debug consoles") has added incorrect dependency for SIFIVE debug uart which should depend on SIFIVE driver instead of PL01x. Fixes: 4cc24aeaf420 ("serial: Add missing Kconfig dependencies for debug consoles") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-07-10 10:41:13 +00:00
depends on SIFIVE_SERIAL
drivers: serial: Add SiFive UART driver This patch adds SiFive UART driver. The driver is 100% DM driver and it determines input clock using clk framework. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-15 06:05:15 +00:00
help
Select this to enable a debug UART using the serial_sifive driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
serial: stm32: Add debug uart support Add support for early debug printf, before the availability of driver model and device tree support. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-17 12:50:42 +00:00
config DEBUG_UART_STM32
bool "STMicroelectronics STM32"
depends on STM32_SERIAL
help
Select this to enable a debug UART using the serial_stm32 driver
You will need to provide parameters to make this work.
The driver will be available until the real driver model
serial is running.
ARM: uniphier: support Debug UART For ARM32 architecture, CONFIG_DEBUG_LL is available for early low-level debugging (and actually UniPhier 32bit SoCs use it), but ARM64 architecture does not support it. Instead, CONFIG_DEBUG_UART is available as an architecture-independent debug facility. This commit supports it on all the UniPhier SoCs (including the new ARMv8 SoCs), which is very useful for new SoC bringups. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:52 +00:00
config DEBUG_UART_UNIPHIER
bool "UniPhier on-chip UART"
depends on ARCH_UNIPHIER
help
Select this to enable a debug UART using the UniPhier on-chip UART.
You will need to provide DEBUG_UART_BASE to make this work. The
driver will be available until the real driver-model serial is
running.
serial: omap: Support debug UART Add debug UART functions to permit omap specific ns16550 to provide an early debug UART. This is mostly in common with DEBUG_UART_NS16550 except for Mode definition register which is required for selecting UART mode(16x auto-baud or 13x mode). Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-22 10:27:25 +00:00
config DEBUG_UART_OMAP
bool "OMAP uart"
serial: Add missing Kconfig dependencies for debug consoles Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it. Error: aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc': /home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts': /home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-28 10:05:12 +00:00
depends on OMAP_SERIAL
serial: omap: Support debug UART Add debug UART functions to permit omap specific ns16550 to provide an early debug UART. This is mostly in common with DEBUG_UART_NS16550 except for Mode definition register which is required for selecting UART mode(16x auto-baud or 13x mode). Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-22 10:27:25 +00:00
help
Select this to enable a debug UART using the omap ns16550 driver.
You will need to provide parameters to make this work. The driver
will be available until the real driver model serial is running.
serial: MediaTek: add high-speed uart driver for MediaTek SoCs Many SoCs from MediaTek have a high-speed uart. This UART is compatible with the ns16550 in legacy mode. It has extra registers for high-speed mode which can reach a maximum baudrate at 921600. However this UART will no longer be compatible if it's in high-speed mode. Some BootROM of MediaTek's SoCs will change the UART into high-speed mode and the U-Boot must use this driver to initialize the UART. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Tested-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:02 +00:00
config DEBUG_UART_MTK
bool "MediaTek High-speed UART"
depends on MTK_SERIAL
help
Select this to enable a debug UART using the MediaTek High-speed
UART driver.
You will need to provide parameters to make this work. The
driver will be available until the real driver model serial is
running.
serial: ns16550: Support debug UART Add debug UART functions to permit ns16550 to provide an early debug UART. Try to avoid using the stack so that this can be called from assembler before a stack is set up (at least on ARM and PowerPC). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:09 +00:00
endchoice
serial: Support an early UART for debugging This came up in a discussion on the mailing list here: https://patchwork.ozlabs.org/patch/384613/ My concerns at the time were: - it doesn't need to be written in assembler - it doesn't need to be ARM-specific This patch provides a possible alternative. It works by allowing any serial driver to export one init function and provide a putc() function. These can be used to output debug data before the real serial driver is available. This implementation does not depend on driver model, and it is possible for it to operate without a stack on some architectures (e.g. PowerPC, ARM). It provides the same features as the ARM-specific debug.S but with more UART and architecture support. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:07 +00:00
config DEBUG_UART_BASE
hex "Base address of UART"
depends on DEBUG_UART
sandbox: Add a debug UART Add support for the debug UART so that sandbox provides build testing for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 17:55:15 +00:00
default 0 if DEBUG_UART_SANDBOX
serial: Support an early UART for debugging This came up in a discussion on the mailing list here: https://patchwork.ozlabs.org/patch/384613/ My concerns at the time were: - it doesn't need to be written in assembler - it doesn't need to be ARM-specific This patch provides a possible alternative. It works by allowing any serial driver to export one init function and provide a putc() function. These can be used to output debug data before the real serial driver is available. This implementation does not depend on driver model, and it is possible for it to operate without a stack on some architectures (e.g. PowerPC, ARM). It provides the same features as the ARM-specific debug.S but with more UART and architecture support. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:07 +00:00
help
This is the base address of your UART for memory-mapped UARTs.
A default should be provided by your board, but if not you will need
to use the correct value here.
config DEBUG_UART_CLOCK
int "UART input clock"
depends on DEBUG_UART
sandbox: Add a debug UART Add support for the debug UART so that sandbox provides build testing for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 17:55:15 +00:00
default 0 if DEBUG_UART_SANDBOX
serial: Support an early UART for debugging This came up in a discussion on the mailing list here: https://patchwork.ozlabs.org/patch/384613/ My concerns at the time were: - it doesn't need to be written in assembler - it doesn't need to be ARM-specific This patch provides a possible alternative. It works by allowing any serial driver to export one init function and provide a putc() function. These can be used to output debug data before the real serial driver is available. This implementation does not depend on driver model, and it is possible for it to operate without a stack on some architectures (e.g. PowerPC, ARM). It provides the same features as the ARM-specific debug.S but with more UART and architecture support. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-27 01:27:07 +00:00
help
The UART input clock determines the speed of the internal UART
circuitry. The baud rate is derived from this by dividing the input
clock down.
A default should be provided by your board, but if not you will need
to use the correct value here.
serial: ns16550: Add an option to specify the debug UART register shift This UART permits different register spacing. To support the debug UART on devices which have a spacing other than 1 byte, allow the shift value to be specified. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-28 05:06:25 +00:00
config DEBUG_UART_SHIFT
int "UART register shift"
depends on DEBUG_UART
default 0 if DEBUG_UART
help
Some UARTs (notably ns16550) support different register layouts
where the registers are spaced either as bytes, words or some other
value. Use this value to specify the shift to use, where 0=byte
registers, 2=32-bit word registers, etc.
debug_uart: Support board-specific UART initialisation Some boards need to set things up before the debug UART can be used. On these boards a call to debug_uart_init() is insufficient. When this option is enabled, the function board_debug_uart_init() will be called when debug_uart_init() is called. You can put any code here that is needed to set up the UART ready for use, such as set pin multiplexing or enable clocks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-19 01:51:24 +00:00
config DEBUG_UART_BOARD_INIT
bool "Enable board-specific debug UART init"
depends on DEBUG_UART
help
Some boards need to set things up before the debug UART can be used.
On these boards a call to debug_uart_init() is insufficient. When
this option is enabled, the function board_debug_uart_init() will
be called when debug_uart_init() is called. You can put any code
here that is needed to set up the UART ready for use, such as set
pin multiplexing or enable clocks.
debug_uart: Add an option to announce the debug UART It is useful to see a message from the debug UART early during boot so that you know things are working. Add an option to enable this. The message will be displayed as soon as debug_uart_init() is called. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-19 01:51:25 +00:00
config DEBUG_UART_ANNOUNCE
bool "Show a message when the debug UART starts up"
depends on DEBUG_UART
help
Enable this option to show a message when the debug UART is ready
for use. You will see a message like "<debug_uart> " as soon as
U-Boot has the UART ready for use (i.e. your code calls
debug_uart_init()). This can be useful just as a check that
everything is working.
arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-14 16:54:24 +00:00
config DEBUG_UART_SKIP_INIT
bool "Skip UART initialization"
drivers: serial: DEBUG_UART_SKIP_INIT depends on DEBUG_UART DEBUG_UART_SKIP_INIT is used only by debug UART and thus should depend on DEBUG_UART. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-09 19:27:09 +00:00
depends on DEBUG_UART
arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-14 16:54:24 +00:00
help
Select this if the UART you want to use for debug output is already
initialized by the time U-Boot starts its execution.
serial: ns16550: fix debug uart putc called before init If _debug_uart_putc() is called before _debug_uart_init(), the ns16550 debug uart driver hangs in a tight loop waiting for the tx FIFO to get empty. As this can happen via a printf sneaking in before the port calls debug_uart_init(), introduce a config option to ignore characters before the debug uart is initialized. This is done by reading the baudrate divisor and aborting if is zero. The Kconfig option is required as reading the baudrate divisor does not seem to work for all ns16500 compatibles (which is why the last attempt on this has been reverted in 1a67969a99). Tested on socfpga_cyclone5_socrates. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-09 19:35:31 +00:00
config DEBUG_UART_NS16550_CHECK_ENABLED
bool "Check if UART is enabled on output"
depends on DEBUG_UART
depends on DEBUG_UART_NS16550
help
Select this if puts()/putc() might be called before the debug UART
has been initialized. If this is disabled, putc() might sit in a
tight loop if it is called before debug_uart_init() has been called.
Note that this does not work for every ns16550-compatible UART and
so has to be enabled carefully or you might notice lost characters.
nios2: convert altera_jtag_uart to driver model Convert altera_jtag_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 23:36:37 +00:00
config ALTERA_JTAG_UART
bool "Altera JTAG UART support"
depends on DM_SERIAL
help
Select this to enable an JTAG UART for Altera devices.The JTAG UART
core implements a method to communicate serial character streams
between a host PC and a Qsys system on an Altera FPGA. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
config ALTERA_JTAG_UART_BYPASS
bool "Bypass output when no connection"
depends on ALTERA_JTAG_UART
help
Bypass console output and keep going even if there is no JTAG
terminal connection with the host. The console output will resume
once the JTAG terminal is connected. Without the bypass, the console
output will wait forever until a JTAG terminal is connected. If you
not are sure, say Y.
nios2: convert altera_uart to driver model Convert altera_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-21 13:26:54 +00:00
config ALTERA_UART
bool "Altera UART support"
depends on DM_SERIAL
help
Select this to enable an UART for Altera devices. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
drivers: serial: add serial driver for ar933x SOC This patch add support for ar933x serial. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-16 08:59:57 +00:00
config AR933X_UART
bool "QCA/Atheros ar933x UART support"
depends on DM_SERIAL && SOC_AR933X
help
Select this to enable UART support for QCA/Atheros ar933x
devices. This driver uses driver model and requires a device
tree binding to operate, please refer to the document at
doc/device-tree-bindings/serial/qca,ar9330-uart.txt.
serial: Convert ARC_SERIAL to Kconfig One step closer to completely Kconfig-driven target configuration in U-Boot :) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-21 13:40:05 +00:00
config ARC_SERIAL
bool "ARC UART support"
depends on DM_SERIAL
help
Select this to enable support for ARC UART now typically
only used in Synopsys DesignWare ARC simulators like nSIM.
serial: Convert ARM_DCC to Kconfig The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-02 21:26:33 +00:00
config ARM_DCC
bool "ARM Debug Communication Channel (DCC) as UART support"
depends on ARM
help
Select this to enable using the ARM DCC as a form of UART.
serial: Kconfig: Add ATMEL_USART option Add ATMEL_USART option to support to enable the Atmel usart driver from Kconfig. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-17 01:49:54 +00:00
config ATMEL_USART
bool "Atmel USART support"
help
Select this to enable USART support for Atmel SoCs. It can be
configured in the device tree, and input clock frequency can
be got from the clk node.
serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL This patch adds an alterative SPL version of atmel_serial_enable_clk(). This enables the usage of this driver without full clock support (in drivers and DT nodes). This saves some space in the SPL image. Please note that this fixed clock support is only added to the SPL code in the DM_SERIAL part of this file. All boards not using SPL & DM_SERIAL should not be affected. This patch also introduces CONFIG_SPL_UART_CLOCK for the fixed UART input clock. It defaults to 132096000 for ARCH_AT91 but can be set to a different value if needed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-03 13:24:19 +00:00
config SPL_UART_CLOCK
int "SPL fixed UART input clock"
depends on ATMEL_USART && SPL && !SPL_CLK
default 132096000 if ARCH_AT91
help
Provide a fixed clock value as input to the UART controller. This
might be needed on platforms which can't enable CONFIG_SPL_CLK
because of SPL image size restrictions.
bcm2835_mu_serial: Convert to Kconfig Setting config options using headers is deprecated. This patch converts the BCM2835 Mini-UART to Kconfig. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:53 +00:00
config BCM283X_MU_SERIAL
bool "Support for BCM283x Mini-UART"
depends on DM_SERIAL && ARCH_BCM283X
default y
help
Select this to enable Mini-UART support on BCM283X family of SoCs.
bcm2835_pl011_serial: Add BCM2835 specific serial driver On bcm2835 we need to ensure we only access serial devices that are muxed to the serial output pins of the pin header. To achieve this for the pl011 device, add a bcm2835 specific pl011 wrapper device that does this check but otherwise behaves like a pl011 device. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:55 +00:00
config BCM283X_PL011_SERIAL
bool "Support for BCM283x PL011 UART"
depends on PL01X_SERIAL && ARCH_BCM283X
default y
help
Select this to enable an overriding PL011 driver for BCM283X SoCs
that supports automatic disable, so that it only gets used when
the UART is actually muxed.
serial: add serial driver for BCM6345 It is based on linux/drivers/tty/serial/bcm63xx_uart.c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-24 22:39:16 +00:00
config BCM6345_SERIAL
bool "Support for BCM6345 UART"
serial: bcm6858: remove driver and switch to bcm6345 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-01 17:42:09 +00:00
depends on DM_SERIAL
serial: add serial driver for BCM6345 It is based on linux/drivers/tty/serial/bcm63xx_uart.c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-24 22:39:16 +00:00
help
Select this to enable UART on BCM6345 SoCs.
x86: serial: Add a coreboot serial driver Coreboot can provide information about the serial device in use on a platform. Add a driver that uses this information to produce a working UART. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-20 00:58:20 +00:00
config COREBOOT_SERIAL
bool "Coreboot UART support"
depends on DM_SERIAL
default y if SYS_COREBOOT
select SYS_NS16550
help
Select this to enable a ns16550-style UART where the platform data
comes from the coreboot 'sysinfo' tables. This allows U-Boot to have
a serial console on any platform without needing to change the
device tree, etc.
serial: serial_cortina: add UART DM driver for CAxxxx SoCs Add serial UART driver support for all Cortina Access CAxxxx family of SoCs. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-01-30 20:34:58 +00:00
config CORTINA_UART
bool "Cortina UART support"
depends on DM_SERIAL
help
Select this to enable UART support for Cortina-Access UART devices
found on CAxxxx SoCs.
serial: Migrate CONFIG_FSL_LINFLEXUART to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-04-09 01:34:34 +00:00
config FSL_LINFLEXUART
bool "Freescale Linflex UART support"
depends on DM_SERIAL
help
Select this to enable the Linflex serial module found on some
NXP SoCs like S32V234.
serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. Create a Kconfig option and move it to defconfig for all boards that have this serial driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-14 03:39:00 +00:00
config FSL_LPUART
bool "Freescale LPUART support"
help
Select this to enable a Low Power UART for Freescale VF610 and
QorIQ Layerscape devices.
serial: Add serial_mvebu_a3700 for Armada 3700 SoC The Armada 3700's UART is a simple serial port. It has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO integrated. This patch adds support for this UART including the DEBUG UART functions for very early debug output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-05-17 14:36:00 +00:00
config MVEBU_A3700_UART
bool "UART support for Armada 3700"
default n
help
Choose this option to add support for UART driver on the Marvell
Armada 3700 SoC. The base address is configured via DT.
drivers: serial: mcfuart: add DT support This patch adds devicetree support to the mcfuart.c driver and removes non DM code. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-03-13 20:46:49 +00:00
config MCFUART
bool "Freescale ColdFire UART support"
help
Choose this option to add support for UART driver on the ColdFire
SoC's family. The serial communication channel provides a full-duplex
asynchronous/synchronous receiver and transmitter deriving an
operating frequency from the internal bus clock or an external clock.
serial: Kconfig: Add MXC_UART entry Added kconfig for MXC_UART driver. Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:08 +00:00
config MXC_UART
bool "IMX serial port support"
Convert CONFIG_MXC_UART to Kconfig This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-09 14:46:46 +00:00
depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 || TARGET_MX35PDK \
|| MX5 || MX6 || MX7 || IMX8M
serial: Kconfig: Add MXC_UART entry Added kconfig for MXC_UART driver. Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:08 +00:00
help
If you have a machine based on a Motorola IMX CPU you
can enable its onboard serial port by enabling this option.
serial: nulldev: Add nulldev serial driver Some device the serial console's initialization cannot run early during the boot process. Hence, nulldev serial device is helpful on that situation. For example, if the serial module was implemented in FPGA. Serial initialization is prohibited to run until the FPGA was programmed. This commit is to adding nulldev serial driver. This will allows the default console to be specified as a nulldev. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Keng Soon Cheah <keng.soon.cheah@ni.com> Cc: Chen Yee Chew <chen.yee.chew@ni.com>
2017-08-25 03:29:07 +00:00
config NULLDEV_SERIAL
bool "Null serial device"
help
Select this to enable null serial device support. A null serial
device merely acts as a placeholder for a serial device and does
nothing for all it's operation.
drivers: serial: add driver for Microchip PIC32 UART controller. This adds PIC32 UART controller support based on driver model. Signed-off-by: Paul Thacker <paul.thacker@microchip.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 10:00:14 +00:00
config PIC32_SERIAL
bool "Support for Microchip PIC32 on-chip UART"
depends on DM_SERIAL && MACH_PIC32
default y
help
Support for the UART found on Microchip PIC32 SoC's.
ns16550: move CONFIG_SYS_NS16550 to Kconfig Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-19 13:48:14 +00:00
config SYS_NS16550
bool "NS16550 UART or compatible"
help
Support NS16550 UART or compatible. This can be enabled in the
device tree with the correct input clock frequency. If the input
clock frequency is not defined in the device tree, the macro
CONFIG_SYS_NS16550_CLK defined in a legacy board header file will
be used. It can be a constant or a function to get clock, eg,
get_serial_clock().
serial: ns16550: Support run-time configuration At present this driver uses an assortment of CONFIG options to control how it accesses the hardware. This is painful for platforms that are supposed to be controlled by a device tree or a previous-stage bootloader. Add a new CONFIG option to enable fully dynamic configuration. This controls register spacing, size, offset and endianness. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Aiden Park <aiden.park@intel.com> Tested-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: squashed in http://patchwork.ozlabs.org/patch/1232929/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-20 00:58:18 +00:00
config NS16550_DYNAMIC
bool "Allow NS16550 to be configured at runtime"
default y if SYS_COREBOOT || SYS_SLIMBOOTLOADER
help
Enable this option to allow device-tree control of the driver.
Normally this driver is controlled by the following options:
CONFIG_SYS_NS16550_PORT_MAPPED - indicates that port I/O is used for
access. If not enabled, then the UART is memory-mapped.
CONFIG_SYS_NS16550_MEM32 - if memory-mapped, indicates that 32-bit
access should be used (instead of 8-bit)
CONFIG_SYS_NS16550_REG_SIZE - indicates register width and also
endianness. If positive, big-endian access is used. If negative,
little-endian is used.
It is not a good practice for a driver to be statically configured,
since it prevents the same driver being used for different types of
UARTs in a system. This option avoids this problem at the cost of a
slightly increased code size.
serial: Add serial driver for Intel MID Add a specific serial driver for Intel MID platforms. It has special fractional divider which can be programmed via UART_PS, UART_MUL, and UART_DIV registers. The UART clock is calculated as UART clock = XTAL * UART_MUL / UART_DIV The baudrate is calculated as baud rate = UART clock / UART_PS / DLAB Initialize fractional divider correctly for Intel Edison platform. For backward compatibility we have to set initial DLAB value to 16 and speed to 115200 baud, where initial frequency is 29491200Hz, and XTAL frequency is 38.4MHz. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2017-02-28 12:04:10 +00:00
config INTEL_MID_SERIAL
bool "Intel MID platform UART support"
depends on DM_SERIAL && OF_CONTROL
depends on INTEL_MID
select SYS_NS16550
help
Select this to enable a UART for Intel MID platforms.
This uses the ns16550 driver as a library.
pl010: Convert CONFIG_PL010_SERIAL to Kconfig We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl010. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:50 +00:00
config PL010_SERIAL
bool "ARM PL010 driver"
depends on !DM_SERIAL
help
Select this to enable a UART for platforms using PL010.
pl011: Convert CONFIG_PL011_SERIAL to Kconfig We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl011. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:51 +00:00
config PL011_SERIAL
bool "ARM PL011 driver"
depends on !DM_SERIAL
help
Select this to enable a UART for platforms using PL011.
pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl01x. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-25 11:05:52 +00:00
config PL01X_SERIAL
bool "ARM PL010 and PL011 driver"
depends on DM_SERIAL
help
Select this to enable a UART for platforms using PL010 or PL011.
rockchip: serial: Add an of-platdata driver for rockchip Add a driver that works with of-platdata. It sets up the platform data and calls the standard ns16550 driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:24 +00:00
config ROCKCHIP_SERIAL
bool "Rockchip on-chip UART support"
depends on DM_SERIAL && SPL_OF_PLATDATA
help
Select this to enable a debug UART for Rockchip devices when using
Kconfig: CONFIG_OF_PLATDATA doesn't really exist There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-14 17:20:23 +00:00
CONFIG_SPL_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
rockchip: serial: Add an of-platdata driver for rockchip Add a driver that works with of-platdata. It sets up the platform data and calls the standard ns16550 driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:24 +00:00
This uses the ns16550 driver, converting the platdata from of-platdata
to the ns16550 format.
sandbox: Move CONFIG_SANDBOX_SERIAL to Kconfig Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-06 20:19:03 +00:00
config SANDBOX_SERIAL
bool "Sandbox UART support"
serial: drop redundant depends on SANDBOX_SERIAL depends on SANDBOX, and SANDBOX selects DM. So, "SANDBOX_SERIAL depends on DM" is redundant. Likewise, UNIPHIER_SERIAL depends on ARCH_UNIPHIER, and ARCH_UNIPHIER selects DM_SERIAL. So, "UNIPHIER_SERIAL depends on DM_SERIAL" is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-28 11:14:21 +00:00
depends on SANDBOX
sandbox: Move CONFIG_SANDBOX_SERIAL to Kconfig Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-06 20:19:03 +00:00
help
Select this to enable a seral UART for sandbox. This is required to
operate correctly, otherwise you will see no serial output from
sandbox. The emulated UART will display to the console and console
input will be fed into the UART. This allows you to interact with
U-Boot.
The operation of the console is controlled by the -t command-line
flag. In raw mode, U-Boot sees all characters from the terminal
before they are processed, including Ctrl-C. In cooked mode, Ctrl-C
is processed by the terminal, and terminates U-Boot. Valid options
are:
-t raw-with-sigs Raw mode, Ctrl-C will terminate U-Boot
-t raw Raw mode, Ctrl-C is processed by U-Boot
-t cooked Cooked mode, Ctrl-C terminates
serial: sh: Convert to Kconfig Convert the SH Serial to Kconfig using tools/moveconfig.py tool and a bit of manual adjustment to cater for failed conversions. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-21 21:18:46 +00:00
config SCIF_CONSOLE
bool "Renesas SCIF UART support"
depends on SH || ARCH_RMOBILE
help
Select this to enable Renesas SCIF UART. To operate serial ports
on systems with RCar or SH SoCs, say Y to this option. If unsure,
say N.
serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 13:26:11 +00:00
config UNIPHIER_SERIAL
ARM: UniPhier: update the vendor name of UniPhier in Kconfig The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-29 08:30:01 +00:00
bool "Support for UniPhier on-chip UART"
serial: drop redundant depends on SANDBOX_SERIAL depends on SANDBOX, and SANDBOX selects DM. So, "SANDBOX_SERIAL depends on DM" is redundant. Likewise, UNIPHIER_SERIAL depends on ARCH_UNIPHIER, and ARCH_UNIPHIER selects DM_SERIAL. So, "UNIPHIER_SERIAL depends on DM_SERIAL" is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-28 11:14:21 +00:00
depends on ARCH_UNIPHIER
ARM: uniphier: change UNIPHIER_SERIAL to default y option This is very likely to be necessary for normal use cases. Set its default to 'y' for shorter defconfig files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-25 10:00:37 +00:00
default y
serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 13:26:11 +00:00
help
ARM: UniPhier: update the vendor name of UniPhier in Kconfig The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-29 08:30:01 +00:00
If you have a UniPhier based board and want to use the on-chip
serial ports, say Y to this option. If unsure, say N.
x86: Move CONFIG_X86_SERIAL to Kconfig Move this config option to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-27 21:47:23 +00:00
serial: uartlite: Add uartlite to Kconfig - Move config option out of board file. - Remove uartlite address from config file Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-09 11:50:05 +00:00
config XILINX_UARTLITE
bool "Xilinx Uarlite support"
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-24 12:41:51 +00:00
depends on DM_SERIAL
serial: uartlite: Add uartlite to Kconfig - Move config option out of board file. - Remove uartlite address from config file Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-09 11:50:05 +00:00
help
If you have a Xilinx based board and want to use the uartlite
serial ports, say Y to this option. If unsure, say N.
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 06:30:16 +00:00
config MESON_SERIAL
bool "Support for Amlogic Meson UART"
depends on DM_SERIAL && ARCH_MESON
help
If you have an Amlogic Meson based board and want to use the on-chip
serial ports, say Y to this option. If unsure, say N.
serial: Add support for Qualcomm serial port This driver works in "new" Data Mover UART mode, so will be compatible with modern Qualcomm chips only. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:14 +00:00
config MSM_SERIAL
bool "Qualcomm on-chip UART"
depends on DM_SERIAL
help
Support Data Mover UART used on Qualcomm Snapdragon SoCs.
It should support all Qualcomm devices with UARTDM version 1.4,
for example APQ8016 and MSM8916.
Single baudrate is supported in current implementation (115200).
serial: Add serial_mvebu_a3700 for Armada 3700 SoC The Armada 3700's UART is a simple serial port. It has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO integrated. This patch adds support for this UART including the DEBUG UART functions for very early debug output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-05-17 14:36:00 +00:00
serial: omap: Introduce DM specific omap serial Add driver model support for OMAP_SERIAL while reusing the functions in ns16550.c Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2018-08-27 10:25:24 +00:00
config OMAP_SERIAL
bool "Support for OMAP specific UART"
depends on DM_SERIAL
arm: K3: Add initial support for TI's K3 generation of SoCs Add support for Texas Instruments' K3 Generation Processor families. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-27 10:27:08 +00:00
default y if (ARCH_OMAP2PLUS || ARCH_K3)
serial: omap: Introduce DM specific omap serial Add driver model support for OMAP_SERIAL while reusing the functions in ns16550.c Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2018-08-27 10:25:24 +00:00
select SYS_NS16550
help
If you have an TI based SoC and want to use the on-chip serial
port, say Y to this option. If unsure say N.
serial: Add Actions Semi OWL UART support This commit adds Actions Semi OWL family UART support. This driver relies on baudrate configured by primary bootloaders. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-14 18:08:38 +00:00
config OWL_SERIAL
bool "Actions Semi OWL UART"
depends on DM_SERIAL && ARCH_OWL
help
If you have a Actions Semi OWL based board and want to use the on-chip
serial port, say Y to this option. If unsure, say N.
Single baudrate is supported in current implementation (115200).
serial: pxa: use kconfig for serial configuration Migrate the PXA serial driver to be configured via Kconfig. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
2016-11-14 20:40:25 +00:00
config PXA_SERIAL
bool "PXA serial port support"
help
If you have a machine based on a Marvell XScale PXA2xx CPU you
can enable its onboard serial ports by enabling this option.
drivers: serial: Add SiFive UART driver This patch adds SiFive UART driver. The driver is 100% DM driver and it determines input clock using clk framework. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-15 06:05:15 +00:00
config SIFIVE_SERIAL
bool "SiFive UART support"
depends on DM_SERIAL
help
This driver supports the SiFive UART. If unsure say N.
STiH410: Add STi serial driver This patch adds support to ASC (asynchronous serial controller) driver, which is basically a standard serial driver. This IP is common across other STMicroelectronics SoCs Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:07 +00:00
config STI_ASC_SERIAL
bool "STMicroelectronics on-chip UART"
depends on DM_SERIAL && ARCH_STI
help
Select this to enable Asynchronous Serial Controller available
on STiH410 SoC. This is a basic implementation, it supports
following baudrate 9600, 19200, 38400, 57600 and 115200.
serial: stm32: Rename serial_stm32x7.c to serial_stm32.c Now this driver is used across stm32f4, stm32f7 and stm32h7 SoCs family, give it a generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-12 08:23:49 +00:00
config STM32_SERIAL
serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig Add CONFIG_STM32X7_SERIAL as a Kconfig option. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-26 13:48:39 +00:00
bool "STMicroelectronics STM32 SoCs on-chip UART"
arm: stm32: add new architecture for STM32MP family - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:10 +00:00
depends on DM_SERIAL && (STM32F4 || STM32F7 || STM32H7 || ARCH_STM32MP)
serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig Add CONFIG_STM32X7_SERIAL as a Kconfig option. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-26 13:48:39 +00:00
help
arm: stm32: add new architecture for STM32MP family - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:10 +00:00
If you have a machine based on a STM32 F4, F7, H7 or MP1 SOC
you can enable its onboard serial ports, say Y to this option.
serial: stm32x7: add STM32H7 support STM32F7 and STM32H7 shares the same UART block, add STM32H7 compatible string. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 16:00:05 +00:00
If unsure, say N.
serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig Add CONFIG_STM32X7_SERIAL as a Kconfig option. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-26 13:48:39 +00:00
arm: zynq: Move ZYNQ_SERIAL to Kconfig Move cadence/zynq serial driver via Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-06 08:16:05 +00:00
config ZYNQ_SERIAL
bool "Cadence (Xilinx Zynq) UART support"
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-24 12:41:51 +00:00
depends on DM_SERIAL
arm: zynq: Move ZYNQ_SERIAL to Kconfig Move cadence/zynq serial driver via Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-06 08:16:05 +00:00
help
This driver supports the Cadence UART. It is found e.g. in Xilinx
Zynq/ZynqMP.
serial: MediaTek: add high-speed uart driver for MediaTek SoCs Many SoCs from MediaTek have a high-speed uart. This UART is compatible with the ns16550 in legacy mode. It has extra registers for high-speed mode which can reach a maximum baudrate at 921600. However this UART will no longer be compatible if it's in high-speed mode. Some BootROM of MediaTek's SoCs will change the UART into high-speed mode and the U-Boot must use this driver to initialize the UART. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Tested-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:08:02 +00:00
config MTK_SERIAL
bool "MediaTek High-speed UART support"
depends on DM_SERIAL
help
Select this to enable UART support for MediaTek High-speed UART
devices. This driver uses driver model and requires a device
tree binding to operate.
The High-speed UART is compatible with the ns16550a UART and have
its own high-speed registers.
powerpc, 8xx: move Serial driver to drivers/serial/ At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:33:27 +00:00
config MPC8XX_CONS
bool "Console driver for MPC8XX"
powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx CONFIG_8xx doesn't mean much outside of arch/powerpc/ This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ... It also renames 8xx_immap.h to immap_8xx.h to be consistent with other file names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-03-16 16:20:41 +00:00
depends on MPC8xx
powerpc, 8xx: move Serial driver to drivers/serial/ At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:33:27 +00:00
default y
serial: serial_xen: Add Xen PV serial driver Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-06 09:42:50 +00:00
config XEN_SERIAL
bool "XEN serial support"
depends on XEN
help
If built without DM support, then requires Xen
to be built with CONFIG_VERBOSE_DEBUG.
powerpc, 8xx: move Serial driver to drivers/serial/ At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:33:27 +00:00
choice
prompt "Console port"
default 8xx_CONS_SMC1
depends on MPC8XX_CONS
help
Depending on board, select one serial port
(CONFIG_8xx_CONS_SMC1 or CONFIG_8xx_CONS_SMC2)
config 8xx_CONS_SMC1
bool "SMC1"
config 8xx_CONS_SMC2
bool "SMC2"
endchoice
config SYS_SMC_RXBUFLEN
int "Console Rx buffer length"
depends on MPC8XX_CONS
default 1
help
With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
the maximum receive buffer length for the SMC.
This option is actual only for 8xx possible.
If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
must be defined, to setup the maximum idle timeout for
the SMC.
config SYS_MAXIDLE
int "maximum idle timeout"
depends on MPC8XX_CONS
default 0
config SYS_BRGCLK_PRESCALE
int "BRG Clock Prescale"
depends on MPC8XX_CONS
default 1
config SYS_SDSR
hex "SDSR Value"
depends on MPC8XX_CONS
default 0x83
config SYS_SDMR
hex "SDMR Value"
depends on MPC8XX_CONS
default 0
drivers: hierarchize drivers Kconfig menu The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-25 17:46:26 +00:00
endmenu
Reference in a new issue Copy permalink