2014-09-16 07:32:58 +00:00
|
|
|
menu "Library routines"
|
|
|
|
|
|
2020-06-03 12:43:40 +00:00
|
|
|
config ADDR_MAP
|
|
|
|
|
bool "Enable support for non-identity virtual-physical mappings"
|
|
|
|
|
help
|
|
|
|
|
Enables helper code for implementing non-identity virtual-physical
|
|
|
|
|
memory mappings for 32bit CPUs.
|
|
|
|
|
|
|
|
|
|
config SYS_NUM_ADDR_MAP
|
|
|
|
|
int "Size of the address-map table"
|
|
|
|
|
depends on ADDR_MAP
|
|
|
|
|
default 16
|
|
|
|
|
help
|
|
|
|
|
Sets the number of entries in the virtual-physical mapping table.
|
|
|
|
|
|
2017-08-11 14:46:05 +00:00
|
|
|
config BCH
|
|
|
|
|
bool "Enable Software based BCH ECC"
|
|
|
|
|
help
|
|
|
|
|
Enables software based BCH ECC algorithm present in lib/bch.c
|
|
|
|
|
This is used by SoC platforms which do not have built-in ELM
|
|
|
|
|
hardware engine required for BCH ECC correction.
|
|
|
|
|
|
2019-12-07 04:41:34 +00:00
|
|
|
config BINMAN_FDT
|
|
|
|
|
bool "Allow access to binman information in the device tree"
|
|
|
|
|
depends on BINMAN && OF_CONTROL
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
This enables U-Boot to access information about binman entries,
|
|
|
|
|
stored in the device tree in a binman node. Typical uses are to
|
|
|
|
|
locate entries in the firmware image. See binman.h for the available
|
|
|
|
|
functionality.
|
|
|
|
|
|
2014-09-16 07:32:59 +00:00
|
|
|
config CC_OPTIMIZE_LIBS_FOR_SPEED
|
|
|
|
|
bool "Optimize libraries for speed"
|
|
|
|
|
help
|
|
|
|
|
Enabling this option will pass "-O2" to gcc when compiling
|
|
|
|
|
under "lib" directory.
|
|
|
|
|
|
|
|
|
|
If unsure, say N.
|
|
|
|
|
|
2018-02-06 13:45:58 +00:00
|
|
|
config DYNAMIC_CRC_TABLE
|
|
|
|
|
bool "Enable Dynamic tables for CRC"
|
|
|
|
|
help
|
|
|
|
|
Enable this option to calculate entries for CRC tables at runtime.
|
|
|
|
|
This can be helpful when reducing the size of the build image
|
|
|
|
|
|
2018-10-15 09:21:15 +00:00
|
|
|
config HAVE_ARCH_IOMAP
|
|
|
|
|
bool
|
|
|
|
|
help
|
|
|
|
|
Enable this option if architecture provides io{read,write}{8,16,32}
|
|
|
|
|
I/O accessor functions.
|
|
|
|
|
|
2014-10-23 16:30:43 +00:00
|
|
|
config HAVE_PRIVATE_LIBGCC
|
|
|
|
|
bool
|
|
|
|
|
|
2018-02-06 18:14:28 +00:00
|
|
|
config LIB_UUID
|
|
|
|
|
bool
|
|
|
|
|
|
2018-04-19 04:32:54 +00:00
|
|
|
config PRINTF
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config SPL_PRINTF
|
|
|
|
|
bool
|
|
|
|
|
select SPL_SPRINTF
|
2019-09-25 14:56:27 +00:00
|
|
|
select SPL_STRTO if !SPL_USE_TINY_PRINTF
|
2018-04-19 04:32:54 +00:00
|
|
|
|
|
|
|
|
config TPL_PRINTF
|
|
|
|
|
bool
|
|
|
|
|
select TPL_SPRINTF
|
2019-09-25 14:56:27 +00:00
|
|
|
select TPL_STRTO if !TPL_USE_TINY_PRINTF
|
2018-04-19 04:32:54 +00:00
|
|
|
|
|
|
|
|
config SPRINTF
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config SPL_SPRINTF
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config TPL_SPRINTF
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config STRTO
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config SPL_STRTO
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config TPL_STRTO
|
|
|
|
|
bool
|
|
|
|
|
|
2018-05-29 15:30:52 +00:00
|
|
|
config IMAGE_SPARSE
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config IMAGE_SPARSE_FILLBUF_SIZE
|
|
|
|
|
hex "Android sparse image CHUNK_TYPE_FILL buffer size"
|
|
|
|
|
default 0x80000
|
|
|
|
|
depends on IMAGE_SPARSE
|
|
|
|
|
help
|
|
|
|
|
Set the size of the fill buffer used when processing CHUNK_TYPE_FILL
|
|
|
|
|
chunks.
|
|
|
|
|
|
2014-10-23 16:30:43 +00:00
|
|
|
config USE_PRIVATE_LIBGCC
|
|
|
|
|
bool "Use private libgcc"
|
|
|
|
|
depends on HAVE_PRIVATE_LIBGCC
|
2016-05-26 16:01:47 +00:00
|
|
|
default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) || MIPS)
|
2014-10-23 16:30:43 +00:00
|
|
|
help
|
|
|
|
|
This option allows you to use the built-in libgcc implementation
|
2016-03-30 11:17:42 +00:00
|
|
|
of U-Boot instead of the one provided by the compiler.
|
2014-10-23 16:30:43 +00:00
|
|
|
If unsure, say N.
|
|
|
|
|
|
2014-10-23 16:30:40 +00:00
|
|
|
config SYS_HZ
|
|
|
|
|
int
|
|
|
|
|
default 1000
|
|
|
|
|
help
|
|
|
|
|
The frequency of the timer returned by get_timer().
|
|
|
|
|
get_timer() must operate in milliseconds and this option must be
|
|
|
|
|
set to 1000.
|
|
|
|
|
|
2019-09-25 14:56:27 +00:00
|
|
|
config SPL_USE_TINY_PRINTF
|
2019-11-10 16:23:53 +00:00
|
|
|
bool "Enable tiny printf() version in SPL"
|
2019-09-25 14:56:27 +00:00
|
|
|
depends on SPL
|
2019-06-08 16:46:18 +00:00
|
|
|
default y
|
2015-11-23 06:00:22 +00:00
|
|
|
help
|
|
|
|
|
This option enables a tiny, stripped down printf version.
|
|
|
|
|
This should only be used in space limited environments,
|
|
|
|
|
like SPL versions with hard memory limits. This version
|
|
|
|
|
reduces the code size by about 2.5KiB on armv7.
|
|
|
|
|
|
|
|
|
|
The supported format specifiers are %c, %s, %u/%d and %x.
|
|
|
|
|
|
2019-09-25 14:56:27 +00:00
|
|
|
config TPL_USE_TINY_PRINTF
|
2019-11-10 16:23:53 +00:00
|
|
|
bool "Enable tiny printf() version in TPL"
|
2019-09-25 14:56:27 +00:00
|
|
|
depends on TPL
|
|
|
|
|
default y if SPL_USE_TINY_PRINTF
|
|
|
|
|
help
|
|
|
|
|
This option enables a tiny, stripped down printf version.
|
|
|
|
|
This should only be used in space limited environments,
|
|
|
|
|
like SPL versions with hard memory limits. This version
|
|
|
|
|
reduces the code size by about 2.5KiB on armv7.
|
|
|
|
|
|
|
|
|
|
The supported format specifiers are %c, %s, %u/%d and %x.
|
|
|
|
|
|
2017-12-04 03:37:00 +00:00
|
|
|
config PANIC_HANG
|
|
|
|
|
bool "Do not reset the system on fatal error"
|
|
|
|
|
help
|
|
|
|
|
Define this option to stop the system in case of a fatal error,
|
|
|
|
|
so that you have to reset it manually. This is probably NOT a good
|
|
|
|
|
idea for an embedded system where you want the system to reboot
|
|
|
|
|
automatically as fast as possible, but it may be useful during
|
|
|
|
|
development since you can try to debug the conditions that lead to
|
|
|
|
|
the situation.
|
|
|
|
|
|
2015-04-21 22:02:42 +00:00
|
|
|
config REGEX
|
|
|
|
|
bool "Enable regular expression support"
|
2015-06-22 22:57:36 +00:00
|
|
|
default y if NET
|
2015-04-21 22:02:42 +00:00
|
|
|
help
|
|
|
|
|
If this variable is defined, U-Boot is linked against the
|
|
|
|
|
SLRE (Super Light Regular Expression) library, which adds
|
|
|
|
|
regex support to some commands, for example "env grep" and
|
|
|
|
|
"setexpr".
|
|
|
|
|
|
2018-02-06 16:18:18 +00:00
|
|
|
choice
|
|
|
|
|
prompt "Pseudo-random library support type"
|
2020-01-19 18:28:12 +00:00
|
|
|
depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID || \
|
|
|
|
|
RNG_SANDBOX || UT_LIB && AES
|
2018-02-06 16:18:18 +00:00
|
|
|
default LIB_RAND
|
blackfin: fix undefined reference to srand and rand
Commit 9ba9e85f3f1c (net: Fix NET_RANDOM_ETHADDR dependencies)
accidentally dropped CONFIG_LIB_RAND defines for 14 Blackfin boards.
Prior to that commit, those boards defined CONFIG_LIB_RAND, but not
CONFIG_NET_RANDOM_ETHADDR. So, commit 9ba9e85f3f1c should not have
touched them, but in fact it ripped CONFIG_LIB_RAND off from all the
header files, which caused undefined reference to srand and rand.
CONFIG_LIB_RAND=y must be revived for such boards.
BTW, this commit indeed makes it better, but even with this fix,
three boards (bf533-stamp, bf538f-ezkit, cm-bf548) still can not
build due to region 'ram' overflowed error. This was cause by
commit 6eed3786c68c (net: Move the CMD_NET config to defconfigs)
because CMD_NET selects NET, and NET selects REGEX. Eventually,
some boards were newly enabled with CONFIG_REGEX, increasing the
memory footprint. A patch is expected to fix the build error.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-11 10:16:43 +00:00
|
|
|
help
|
2018-02-06 16:18:18 +00:00
|
|
|
Select the library to provide pseudo-random number generator
|
|
|
|
|
functions. LIB_HW_RAND supports certain hardware engines that
|
|
|
|
|
provide this functionality. If in doubt, select LIB_RAND.
|
|
|
|
|
|
|
|
|
|
config LIB_RAND
|
|
|
|
|
bool "Pseudo-random library support"
|
|
|
|
|
|
|
|
|
|
config LIB_HW_RAND
|
2020-05-26 17:07:15 +00:00
|
|
|
bool "HW Engine for random library support"
|
2018-02-06 16:18:18 +00:00
|
|
|
|
|
|
|
|
endchoice
|
2015-05-25 09:37:22 +00:00
|
|
|
|
2017-04-02 15:50:28 +00:00
|
|
|
config SPL_TINY_MEMSET
|
|
|
|
|
bool "Use a very small memset() in SPL"
|
|
|
|
|
help
|
|
|
|
|
The faster memset() is the arch-specific one (if available) enabled
|
|
|
|
|
by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
|
|
|
|
|
better performance by writing a word at a time. But in very
|
2019-01-13 09:13:28 +00:00
|
|
|
size-constrained environments even this may be too big. Enable this
|
2017-04-02 15:50:28 +00:00
|
|
|
option to reduce code size slightly at the cost of some speed.
|
|
|
|
|
|
2017-08-03 20:52:04 +00:00
|
|
|
config TPL_TINY_MEMSET
|
|
|
|
|
bool "Use a very small memset() in TPL"
|
|
|
|
|
help
|
|
|
|
|
The faster memset() is the arch-specific one (if available) enabled
|
|
|
|
|
by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
|
|
|
|
|
better performance by writing a word at a time. But in very
|
2019-01-13 09:13:28 +00:00
|
|
|
size-constrained environments even this may be too big. Enable this
|
2017-08-03 20:52:04 +00:00
|
|
|
option to reduce code size slightly at the cost of some speed.
|
|
|
|
|
|
2017-02-27 17:22:05 +00:00
|
|
|
config RBTREE
|
|
|
|
|
bool
|
|
|
|
|
|
2017-11-08 15:35:14 +00:00
|
|
|
config BITREVERSE
|
|
|
|
|
bool "Bit reverse library from Linux"
|
|
|
|
|
|
2019-04-08 19:20:51 +00:00
|
|
|
config TRACE
|
|
|
|
|
bool "Support for tracing of function calls and timing"
|
|
|
|
|
imply CMD_TRACE
|
|
|
|
|
help
|
|
|
|
|
Enables function tracing within U-Boot. This allows recording of call
|
|
|
|
|
traces including timing information. The command can write data to
|
|
|
|
|
memory for exporting for analysis (e.g. using bootchart).
|
|
|
|
|
See doc/README.trace for full details.
|
|
|
|
|
|
2019-04-08 19:20:52 +00:00
|
|
|
config TRACE_BUFFER_SIZE
|
|
|
|
|
hex "Size of trace buffer in U-Boot"
|
|
|
|
|
depends on TRACE
|
|
|
|
|
default 0x01000000
|
|
|
|
|
help
|
|
|
|
|
Sets the size of the trace buffer in U-Boot. This is allocated from
|
|
|
|
|
memory during relocation. If this buffer is too small, the trace
|
|
|
|
|
history will be truncated, with later records omitted.
|
|
|
|
|
|
|
|
|
|
If early trace is enabled (i.e. before relocation), this buffer must
|
|
|
|
|
be large enough to include all the data from the early trace buffer as
|
|
|
|
|
well, since this is copied over to the main buffer during relocation.
|
|
|
|
|
|
|
|
|
|
A trace record is emitted for each function call and each record is
|
|
|
|
|
12 bytes (see struct trace_call). A suggested minimum size is 1MB. If
|
|
|
|
|
the size is too small then 'trace stats' will show a message saying
|
|
|
|
|
how many records were dropped due to buffer overflow.
|
|
|
|
|
|
2019-06-02 11:30:09 +00:00
|
|
|
config TRACE_CALL_DEPTH_LIMIT
|
|
|
|
|
int "Trace call depth limit"
|
|
|
|
|
depends on TRACE
|
|
|
|
|
default 15
|
|
|
|
|
help
|
|
|
|
|
Sets the maximum call depth up to which function calls are recorded.
|
|
|
|
|
|
2019-04-08 19:20:52 +00:00
|
|
|
config TRACE_EARLY
|
|
|
|
|
bool "Enable tracing before relocation"
|
|
|
|
|
depends on TRACE
|
|
|
|
|
help
|
|
|
|
|
Sometimes it is helpful to trace execution of U-Boot before
|
|
|
|
|
relocation. This is possible by using a arch-specific, fixed buffer
|
|
|
|
|
position in memory. Enable this option to start tracing as early as
|
|
|
|
|
possible after U-Boot starts.
|
|
|
|
|
|
|
|
|
|
config TRACE_EARLY_SIZE
|
|
|
|
|
hex "Size of early trace buffer in U-Boot"
|
|
|
|
|
depends on TRACE_EARLY
|
|
|
|
|
default 0x00100000
|
|
|
|
|
help
|
|
|
|
|
Sets the size of the early trace buffer in bytes. This is used to hold
|
|
|
|
|
tracing information before relocation.
|
|
|
|
|
|
2019-06-02 11:30:09 +00:00
|
|
|
config TRACE_EARLY_CALL_DEPTH_LIMIT
|
|
|
|
|
int "Early trace call depth limit"
|
|
|
|
|
depends on TRACE_EARLY
|
|
|
|
|
default 200
|
|
|
|
|
help
|
|
|
|
|
Sets the maximum call depth up to which function calls are recorded
|
|
|
|
|
during early tracing.
|
|
|
|
|
|
2019-04-08 19:20:52 +00:00
|
|
|
config TRACE_EARLY_ADDR
|
|
|
|
|
hex "Address of early trace buffer in U-Boot"
|
|
|
|
|
depends on TRACE_EARLY
|
|
|
|
|
default 0x00100000
|
|
|
|
|
help
|
|
|
|
|
Sets the address of the early trace buffer in U-Boot. This memory
|
|
|
|
|
must be accessible before relocation.
|
|
|
|
|
|
|
|
|
|
A trace record is emitted for each function call and each record is
|
|
|
|
|
12 bytes (see struct trace_call). A suggested minimum size is 1MB. If
|
|
|
|
|
the size is too small then the message which says the amount of early
|
|
|
|
|
data being coped will the the same as the
|
|
|
|
|
|
2015-06-23 21:38:23 +00:00
|
|
|
source lib/dhry/Kconfig
|
|
|
|
|
|
2017-04-27 04:27:49 +00:00
|
|
|
menu "Security support"
|
|
|
|
|
|
|
|
|
|
config AES
|
|
|
|
|
bool "Support the AES algorithm"
|
|
|
|
|
help
|
|
|
|
|
This provides a means to encrypt and decrypt data using the AES
|
|
|
|
|
(Advanced Encryption Standard). This algorithm uses a symetric key
|
|
|
|
|
and is widely used as a streaming cipher. Different key lengths are
|
|
|
|
|
supported by the algorithm but only a 128-bit key is supported at
|
|
|
|
|
present.
|
|
|
|
|
|
2015-01-23 10:31:56 +00:00
|
|
|
source lib/rsa/Kconfig
|
2019-11-13 00:45:00 +00:00
|
|
|
source lib/crypto/Kconfig
|
2015-01-23 10:31:51 +00:00
|
|
|
|
2015-08-23 00:31:19 +00:00
|
|
|
config TPM
|
|
|
|
|
bool "Trusted Platform Module (TPM) Support"
|
2015-10-03 12:39:36 +00:00
|
|
|
depends on DM
|
2015-08-23 00:31:19 +00:00
|
|
|
help
|
|
|
|
|
This enables support for TPMs which can be used to provide security
|
|
|
|
|
features for your board. The TPM can be connected via LPC or I2C
|
|
|
|
|
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
|
|
|
|
|
command to interactive the TPM. Driver model support is provided
|
|
|
|
|
for the low-level TPM interface, but only one TPM is supported at
|
|
|
|
|
a time by the TPM library.
|
|
|
|
|
|
2018-10-01 18:22:19 +00:00
|
|
|
config SPL_TPM
|
|
|
|
|
bool "Trusted Platform Module (TPM) Support in SPL"
|
|
|
|
|
depends on SPL_DM
|
|
|
|
|
help
|
|
|
|
|
This enables support for TPMs which can be used to provide security
|
|
|
|
|
features for your board. The TPM can be connected via LPC or I2C
|
|
|
|
|
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
|
|
|
|
|
command to interactive the TPM. Driver model support is provided
|
|
|
|
|
for the low-level TPM interface, but only one TPM is supported at
|
|
|
|
|
a time by the TPM library.
|
|
|
|
|
|
|
|
|
|
config TPL_TPM
|
|
|
|
|
bool "Trusted Platform Module (TPM) Support in TPL"
|
|
|
|
|
depends on TPL_DM
|
|
|
|
|
help
|
|
|
|
|
This enables support for TPMs which can be used to provide security
|
|
|
|
|
features for your board. The TPM can be connected via LPC or I2C
|
|
|
|
|
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
|
|
|
|
|
command to interactive the TPM. Driver model support is provided
|
|
|
|
|
for the low-level TPM interface, but only one TPM is supported at
|
|
|
|
|
a time by the TPM library.
|
|
|
|
|
|
2017-04-27 04:27:49 +00:00
|
|
|
endmenu
|
|
|
|
|
|
2018-06-03 18:56:37 +00:00
|
|
|
menu "Android Verified Boot"
|
|
|
|
|
|
|
|
|
|
config LIBAVB
|
|
|
|
|
bool "Android Verified Boot 2.0 support"
|
|
|
|
|
depends on ANDROID_BOOT_IMAGE
|
|
|
|
|
default n
|
|
|
|
|
help
|
|
|
|
|
This enables support of Android Verified Boot 2.0 which can be used
|
|
|
|
|
to assure the end user of the integrity of the software running on a
|
|
|
|
|
device. Introduces such features as boot chain of trust, rollback
|
|
|
|
|
protection etc.
|
|
|
|
|
|
|
|
|
|
endmenu
|
|
|
|
|
|
2015-02-20 07:21:46 +00:00
|
|
|
menu "Hashing Support"
|
|
|
|
|
|
|
|
|
|
config SHA1
|
|
|
|
|
bool "Enable SHA1 support"
|
|
|
|
|
help
|
|
|
|
|
This option enables support of hashing using SHA1 algorithm.
|
|
|
|
|
The hash is calculated in software.
|
|
|
|
|
The SHA1 algorithm produces a 160-bit (20-byte) hash value
|
|
|
|
|
(digest).
|
|
|
|
|
|
|
|
|
|
config SHA256
|
|
|
|
|
bool "Enable SHA256 support"
|
|
|
|
|
help
|
|
|
|
|
This option enables support of hashing using SHA256 algorithm.
|
|
|
|
|
The hash is calculated in software.
|
|
|
|
|
The SHA256 algorithm produces a 256-bit (32-byte) hash value
|
|
|
|
|
(digest).
|
|
|
|
|
|
2020-04-16 05:36:52 +00:00
|
|
|
config SHA512_ALGO
|
|
|
|
|
bool "Enable SHA512 algorithm"
|
|
|
|
|
help
|
|
|
|
|
This option enables support of internal SHA512 algorithm.
|
|
|
|
|
|
|
|
|
|
config SHA512
|
|
|
|
|
bool "Enable SHA512 support"
|
|
|
|
|
depends on SHA512_ALGO
|
|
|
|
|
help
|
|
|
|
|
This option enables support of hashing using SHA512 algorithm.
|
|
|
|
|
The hash is calculated in software.
|
|
|
|
|
The SHA512 algorithm produces a 512-bit (64-byte) hash value
|
|
|
|
|
(digest).
|
|
|
|
|
|
|
|
|
|
config SHA384
|
|
|
|
|
bool "Enable SHA384 support"
|
|
|
|
|
depends on SHA512_ALGO
|
|
|
|
|
help
|
|
|
|
|
This option enables support of hashing using SHA384 algorithm.
|
|
|
|
|
The hash is calculated in software.
|
|
|
|
|
The SHA384 algorithm produces a 384-bit (48-byte) hash value
|
|
|
|
|
(digest).
|
|
|
|
|
|
2015-02-20 07:21:46 +00:00
|
|
|
config SHA_HW_ACCEL
|
|
|
|
|
bool "Enable hashing using hardware"
|
|
|
|
|
help
|
|
|
|
|
This option enables hardware acceleration
|
|
|
|
|
for SHA1/SHA256 hashing.
|
|
|
|
|
This affects the 'hash' command and also the
|
|
|
|
|
hash_lookup_algo() function.
|
|
|
|
|
|
|
|
|
|
config SHA_PROG_HW_ACCEL
|
|
|
|
|
bool "Enable Progressive hashing support using hardware"
|
|
|
|
|
depends on SHA_HW_ACCEL
|
|
|
|
|
help
|
|
|
|
|
This option enables hardware-acceleration for
|
|
|
|
|
SHA1/SHA256 progressive hashing.
|
|
|
|
|
Data can be streamed in a block at a time and the hashing
|
|
|
|
|
is performed in hardware.
|
2017-03-15 01:19:05 +00:00
|
|
|
|
|
|
|
|
config MD5
|
2020-05-06 14:03:56 +00:00
|
|
|
bool "Support MD5 algorithm"
|
|
|
|
|
help
|
|
|
|
|
This option enables MD5 support. MD5 is an algorithm designed
|
|
|
|
|
in 1991 that produces a 16-byte digest (or checksum) from its input
|
|
|
|
|
data. It has a number of vulnerabilities which preclude its use in
|
|
|
|
|
security applications, but it can be useful for providing a quick
|
|
|
|
|
checksum of a block of data.
|
|
|
|
|
|
|
|
|
|
config SPL_MD5
|
|
|
|
|
bool "Support MD5 algorithm in SPL"
|
|
|
|
|
help
|
|
|
|
|
This option enables MD5 support in SPL. MD5 is an algorithm designed
|
|
|
|
|
in 1991 that produces a 16-byte digest (or checksum) from its input
|
|
|
|
|
data. It has a number of vulnerabilities which preclude its use in
|
|
|
|
|
security applications, but it can be useful for providing a quick
|
|
|
|
|
checksum of a block of data.
|
2017-03-15 01:19:05 +00:00
|
|
|
|
2017-09-03 15:00:23 +00:00
|
|
|
config CRC32C
|
|
|
|
|
bool
|
|
|
|
|
|
2019-04-29 20:40:43 +00:00
|
|
|
config XXHASH
|
|
|
|
|
bool
|
|
|
|
|
|
2015-02-20 07:21:46 +00:00
|
|
|
endmenu
|
|
|
|
|
|
2015-10-07 03:03:53 +00:00
|
|
|
menu "Compression Support"
|
|
|
|
|
|
|
|
|
|
config LZ4
|
|
|
|
|
bool "Enable LZ4 decompression support"
|
|
|
|
|
help
|
|
|
|
|
If this option is set, support for LZ4 compressed images
|
|
|
|
|
is included. The LZ4 algorithm can run in-place as long as the
|
|
|
|
|
compressed image is loaded to the end of the output buffer, and
|
|
|
|
|
trades lower compression ratios for much faster decompression.
|
|
|
|
|
|
|
|
|
|
NOTE: This implements the release version of the LZ4 frame
|
|
|
|
|
format as generated by default by the 'lz4' command line tool.
|
|
|
|
|
This is not the same as the outdated, less efficient legacy
|
|
|
|
|
frame format currently (2015) implemented in the Linux kernel
|
|
|
|
|
(generated by 'lz4 -l'). The two formats are incompatible.
|
|
|
|
|
|
2017-05-17 09:25:42 +00:00
|
|
|
config LZMA
|
|
|
|
|
bool "Enable LZMA decompression support"
|
|
|
|
|
help
|
|
|
|
|
This enables support for LZMA (Lempel-Ziv-Markov chain algorithm),
|
|
|
|
|
a dictionary compression algorithm that provides a high compression
|
|
|
|
|
ratio and fairly fast decompression speed. See also
|
|
|
|
|
CONFIG_CMD_LZMADEC which provides a decode command.
|
|
|
|
|
|
2017-02-27 17:22:06 +00:00
|
|
|
config LZO
|
2017-07-22 22:36:16 +00:00
|
|
|
bool "Enable LZO decompression support"
|
|
|
|
|
help
|
|
|
|
|
This enables support for LZO compression algorithm.r
|
2017-08-15 18:14:43 +00:00
|
|
|
|
2019-03-08 15:06:55 +00:00
|
|
|
config GZIP
|
2019-04-29 06:59:38 +00:00
|
|
|
bool "Enable gzip decompression support"
|
2019-03-08 15:06:55 +00:00
|
|
|
select ZLIB
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
This enables support for GZIP compression algorithm.
|
2020-03-06 00:24:21 +00:00
|
|
|
|
2020-05-22 12:07:36 +00:00
|
|
|
config GZIP_COMPRESSED
|
|
|
|
|
bool
|
|
|
|
|
select ZLIB
|
|
|
|
|
|
2020-03-06 00:24:21 +00:00
|
|
|
config BZIP2
|
|
|
|
|
bool "Enable bzip2 decompression support"
|
|
|
|
|
help
|
|
|
|
|
This enables support for BZIP2 compression algorithm.
|
2019-03-08 15:06:55 +00:00
|
|
|
|
|
|
|
|
config ZLIB
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
This enables ZLIB compression lib.
|
|
|
|
|
|
2019-04-29 20:40:44 +00:00
|
|
|
config ZSTD
|
|
|
|
|
bool "Enable Zstandard decompression support"
|
|
|
|
|
select XXHASH
|
|
|
|
|
help
|
|
|
|
|
This enables Zstandard decompression library.
|
|
|
|
|
|
2018-11-06 22:21:30 +00:00
|
|
|
config SPL_LZ4
|
|
|
|
|
bool "Enable LZ4 decompression support in SPL"
|
|
|
|
|
help
|
2020-05-26 17:07:15 +00:00
|
|
|
This enables support for the LZ4 decompression algorithm in SPL. LZ4
|
2018-11-06 22:21:30 +00:00
|
|
|
is a lossless data compression algorithm that is focused on
|
|
|
|
|
fast compression and decompression speed. It belongs to the LZ77
|
|
|
|
|
family of byte-oriented compression schemes.
|
|
|
|
|
|
2020-04-21 07:28:38 +00:00
|
|
|
config SPL_LZMA
|
|
|
|
|
bool "Enable LZMA decompression support for SPL build"
|
|
|
|
|
help
|
2020-05-26 17:07:15 +00:00
|
|
|
This enables support for LZMA compression algorithm for SPL boot.
|
2020-04-21 07:28:38 +00:00
|
|
|
|
2017-09-15 10:57:30 +00:00
|
|
|
config SPL_LZO
|
|
|
|
|
bool "Enable LZO decompression support in SPL"
|
|
|
|
|
help
|
|
|
|
|
This enables support for LZO compression algorithm in the SPL.
|
|
|
|
|
|
2017-08-15 18:14:43 +00:00
|
|
|
config SPL_GZIP
|
|
|
|
|
bool "Enable gzip decompression support for SPL build"
|
|
|
|
|
select SPL_ZLIB
|
|
|
|
|
help
|
|
|
|
|
This enables support for GZIP compression altorithm for SPL boot.
|
|
|
|
|
|
|
|
|
|
config SPL_ZLIB
|
|
|
|
|
bool
|
|
|
|
|
help
|
|
|
|
|
This enables compression lib for SPL boot.
|
|
|
|
|
|
2019-04-29 20:40:44 +00:00
|
|
|
config SPL_ZSTD
|
|
|
|
|
bool "Enable Zstandard decompression support in SPL"
|
|
|
|
|
select XXHASH
|
|
|
|
|
help
|
|
|
|
|
This enables Zstandard decompression library in the SPL.
|
|
|
|
|
|
2015-10-07 03:03:53 +00:00
|
|
|
endmenu
|
|
|
|
|
|
2015-04-20 18:07:40 +00:00
|
|
|
config ERRNO_STR
|
|
|
|
|
bool "Enable function for getting errno-related string message"
|
|
|
|
|
help
|
|
|
|
|
The function errno_str(int errno), returns a pointer to the errno
|
|
|
|
|
corresponding text message:
|
|
|
|
|
- if errno is null or positive number - a pointer to "Success" message
|
|
|
|
|
- if errno is negative - a pointer to errno related message
|
|
|
|
|
|
2018-06-05 14:17:57 +00:00
|
|
|
config HEXDUMP
|
|
|
|
|
bool "Enable hexdump"
|
|
|
|
|
help
|
|
|
|
|
This enables functions for printing dumps of binary data.
|
|
|
|
|
|
2016-02-23 05:55:42 +00:00
|
|
|
config OF_LIBFDT
|
|
|
|
|
bool "Enable the FDT library"
|
|
|
|
|
default y if OF_CONTROL
|
|
|
|
|
help
|
|
|
|
|
This enables the FDT library (libfdt). It provides functions for
|
|
|
|
|
accessing binary device tree images in memory, such as adding and
|
2017-08-18 15:58:51 +00:00
|
|
|
removing nodes and properties, scanning through the tree and finding
|
2016-02-23 05:55:42 +00:00
|
|
|
particular compatible nodes. The library operates on a flattened
|
|
|
|
|
version of the device tree.
|
|
|
|
|
|
2019-10-27 15:47:40 +00:00
|
|
|
config OF_LIBFDT_ASSUME_MASK
|
|
|
|
|
hex "Mask of conditions to assume for libfdt"
|
|
|
|
|
depends on OF_LIBFDT || FIT
|
|
|
|
|
default 0
|
|
|
|
|
help
|
|
|
|
|
Use this to change the assumptions made by libfdt about the
|
|
|
|
|
device tree it is working with. A value of 0 means that no assumptions
|
|
|
|
|
are made, and libfdt is able to deal with malicious data. A value of
|
|
|
|
|
0xff means all assumptions are made and any invalid data may cause
|
|
|
|
|
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
|
|
|
|
|
|
2016-07-05 08:26:44 +00:00
|
|
|
config OF_LIBFDT_OVERLAY
|
|
|
|
|
bool "Enable the FDT library overlay support"
|
2018-05-08 12:52:17 +00:00
|
|
|
depends on OF_LIBFDT
|
2018-04-25 21:03:23 +00:00
|
|
|
default y if ARCH_OMAP2PLUS || ARCH_KEYSTONE
|
2016-07-05 08:26:44 +00:00
|
|
|
help
|
|
|
|
|
This enables the FDT library (libfdt) overlay support.
|
|
|
|
|
|
2016-02-23 05:55:45 +00:00
|
|
|
config SPL_OF_LIBFDT
|
|
|
|
|
bool "Enable the FDT library for SPL"
|
|
|
|
|
default y if SPL_OF_CONTROL
|
|
|
|
|
help
|
|
|
|
|
This enables the FDT library (libfdt). It provides functions for
|
|
|
|
|
accessing binary device tree images in memory, such as adding and
|
2017-08-18 15:58:51 +00:00
|
|
|
removing nodes and properties, scanning through the tree and finding
|
2016-02-23 05:55:45 +00:00
|
|
|
particular compatible nodes. The library operates on a flattened
|
|
|
|
|
version of the device tree.
|
|
|
|
|
|
2019-10-27 15:47:40 +00:00
|
|
|
config SPL_OF_LIBFDT_ASSUME_MASK
|
|
|
|
|
hex "Mask of conditions to assume for libfdt"
|
|
|
|
|
depends on SPL_OF_LIBFDT || FIT
|
|
|
|
|
default 0xff
|
|
|
|
|
help
|
|
|
|
|
Use this to change the assumptions made by libfdt in SPL about the
|
|
|
|
|
device tree it is working with. A value of 0 means that no assumptions
|
|
|
|
|
are made, and libfdt is able to deal with malicious data. A value of
|
|
|
|
|
0xff means all assumptions are made and any invalid data may cause
|
|
|
|
|
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
|
|
|
|
|
|
2018-10-01 18:22:21 +00:00
|
|
|
config TPL_OF_LIBFDT
|
|
|
|
|
bool "Enable the FDT library for TPL"
|
|
|
|
|
default y if TPL_OF_CONTROL
|
|
|
|
|
help
|
|
|
|
|
This enables the FDT library (libfdt). It provides functions for
|
|
|
|
|
accessing binary device tree images in memory, such as adding and
|
|
|
|
|
removing nodes and properties, scanning through the tree and finding
|
|
|
|
|
particular compatible nodes. The library operates on a flattened
|
|
|
|
|
version of the device tree.
|
|
|
|
|
|
2019-10-27 15:47:40 +00:00
|
|
|
config TPL_OF_LIBFDT_ASSUME_MASK
|
|
|
|
|
hex "Mask of conditions to assume for libfdt"
|
|
|
|
|
depends on TPL_OF_LIBFDT || FIT
|
|
|
|
|
default 0xff
|
|
|
|
|
help
|
|
|
|
|
Use this to change the assumptions made by libfdt in TPL about the
|
|
|
|
|
device tree it is working with. A value of 0 means that no assumptions
|
|
|
|
|
are made, and libfdt is able to deal with malicious data. A value of
|
|
|
|
|
0xff means all assumptions are made and any invalid data may cause
|
|
|
|
|
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
|
|
|
|
|
|
2016-10-06 05:31:45 +00:00
|
|
|
config FDT_FIXUP_PARTITIONS
|
|
|
|
|
bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
|
|
|
|
|
depends on OF_LIBFDT
|
2018-07-20 02:04:09 +00:00
|
|
|
depends on CMD_MTDPARTS
|
2016-10-06 05:31:45 +00:00
|
|
|
help
|
|
|
|
|
Allow overwriting defined partitions in the device tree blob
|
|
|
|
|
using partition info defined in the 'mtdparts' environment
|
|
|
|
|
variable.
|
|
|
|
|
|
2016-08-18 23:23:23 +00:00
|
|
|
menu "System tables"
|
2016-08-18 23:23:29 +00:00
|
|
|
depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER)
|
2016-08-18 23:23:23 +00:00
|
|
|
|
|
|
|
|
config GENERATE_SMBIOS_TABLE
|
|
|
|
|
bool "Generate an SMBIOS (System Management BIOS) table"
|
|
|
|
|
default y
|
2016-08-18 23:23:29 +00:00
|
|
|
depends on X86 || EFI_LOADER
|
2016-08-18 23:23:23 +00:00
|
|
|
help
|
|
|
|
|
The System Management BIOS (SMBIOS) specification addresses how
|
|
|
|
|
motherboard and system vendors present management information about
|
|
|
|
|
their products in a standard format by extending the BIOS interface
|
|
|
|
|
on Intel architecture systems.
|
|
|
|
|
|
|
|
|
|
Check http://www.dmtf.org/standards/smbios for details.
|
|
|
|
|
|
|
|
|
|
config SMBIOS_MANUFACTURER
|
|
|
|
|
string "SMBIOS Manufacturer"
|
|
|
|
|
depends on GENERATE_SMBIOS_TABLE
|
|
|
|
|
default SYS_VENDOR
|
|
|
|
|
help
|
|
|
|
|
The board manufacturer to store in SMBIOS structures.
|
|
|
|
|
Change this to override the default one (CONFIG_SYS_VENDOR).
|
|
|
|
|
|
|
|
|
|
config SMBIOS_PRODUCT_NAME
|
|
|
|
|
string "SMBIOS Product Name"
|
|
|
|
|
depends on GENERATE_SMBIOS_TABLE
|
|
|
|
|
default SYS_BOARD
|
|
|
|
|
help
|
|
|
|
|
The product name to store in SMBIOS structures.
|
|
|
|
|
Change this to override the default one (CONFIG_SYS_BOARD).
|
|
|
|
|
|
|
|
|
|
endmenu
|
|
|
|
|
|
2019-11-13 00:44:53 +00:00
|
|
|
config ASN1_COMPILER
|
|
|
|
|
bool
|
|
|
|
|
|
2019-11-13 00:44:55 +00:00
|
|
|
config ASN1_DECODER
|
|
|
|
|
bool
|
|
|
|
|
help
|
|
|
|
|
Enable asn1 decoder library.
|
|
|
|
|
|
2019-11-13 00:44:57 +00:00
|
|
|
config OID_REGISTRY
|
|
|
|
|
bool
|
|
|
|
|
help
|
|
|
|
|
Enable fast lookup object identifier registry.
|
|
|
|
|
|
2015-07-31 15:31:36 +00:00
|
|
|
source lib/efi/Kconfig
|
2016-03-04 00:10:07 +00:00
|
|
|
source lib/efi_loader/Kconfig
|
2018-03-13 16:50:27 +00:00
|
|
|
source lib/optee/Kconfig
|
2015-07-31 15:31:36 +00:00
|
|
|
|
2019-03-21 18:10:04 +00:00
|
|
|
config TEST_FDTDEC
|
|
|
|
|
bool "enable fdtdec test"
|
|
|
|
|
depends on OF_LIBFDT
|
|
|
|
|
|
2019-11-13 00:44:49 +00:00
|
|
|
config LIB_DATE
|
|
|
|
|
bool
|
|
|
|
|
|
2020-02-12 08:25:03 +00:00
|
|
|
config LIB_ELF
|
|
|
|
|
bool
|
|
|
|
|
help
|
|
|
|
|
Supoort basic elf loading/validating functions.
|
|
|
|
|
This supports fir 32 bit and 64 bit versions.
|
|
|
|
|
|
2014-09-16 07:32:58 +00:00
|
|
|
endmenu
|
