Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-30 03:12:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arc/dts/Makefile

22 lines
523 B
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 01:06:16 +00:00
arc: dts: separate single axs10x.dts file We want to use the same device tree blobs in both Linux and U-Boot for ARC boards. Earlier device tree sources in U-Boot were very simplified and hadn't been updated for quite a long period of time. So this commit is the first step on the road to unified device tree blobs. First of all we re-organize device tree sources for AXS10X boards. As AXS101 and AXS103 boards consist of AXS10X motherboard and AXC001 and AXC003 cpu tiles respectively we add corresponding device tree source files: axs10x_mb.dtsi for motherboard, axc001.dtsi and axc003.dtsi for cpu tiles and axs101.dts and axs103.dts to represent actual boards. Also we delete axs10x.dts as it is no longer used. One more important change - we add timer device to ARC skeleton device tree sources as both ARC700 and ARCHS cores contain such timer. We add core_clk nodes to abilis_tb100, nsim, axc001 and axc003 device tree sources as it is referenced via phandle from timer node in common skeleton.dtsi file. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-21 11:49:48 +00:00
dtb-$(CONFIG_TARGET_AXS101) += axs101.dtb
dtb-$(CONFIG_TARGET_AXS103) += axs103.dtb
arc: Rename ARCangel4 board to nSIM ARCangel was one of the main development boards back in the day but now it's gone and replaced by other boards like ARC SDP. But we also used to have simulation platform very similar to ARCangel4 in terms of CPU settings as well as basic IO like UART. Even though ARCangel4 is long gone now we have a replacement for simulation which is a plain or stand-alone nSIM and Free nSIM. Note Free nSIM is available for download here: https://www.synopsys.com/cgi-bin/dwarcnsim/req1.cgi And while at it: * Finally switch hex numerical values in nsim.h to defines from include/linux/sizes.h * Add defconfigs with ARC HS38 cores * Recreated all defconfigs with savedefconfig Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-04 11:35:01 +00:00
dtb-$(CONFIG_TARGET_NSIM) += nsim.dtb
board: Switch Abilis TB-100 board to Driver Model for serial port Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
2015-03-27 10:24:35 +00:00
dtb-$(CONFIG_TARGET_TB100) += abilis_tb100.dtb
emdk->emsdp: Rename board Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-18 06:54:58 +00:00
dtb-$(CONFIG_TARGET_EMSDP) += emsdp.dtb
ARC: HSDK: split HSDK and HSDK-4xD DTS Split HSDK and HSDK-4xD device tree files so they can have different model names. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-21 22:29:18 +00:00
dtb-$(CONFIG_TARGET_HSDK) += hsdk.dtb hsdk-4xd.dtb
arc: Add support for IoT development kit The DesignWare ARC IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs. More information is avaialble here [1] and here [2]. The board is based on real silicon with ARC EM9D-based Data Fusion IP Subsystem. It sports a rich set of I/O including * DW USB OTG * DW MobileStorage (used for micro SD-card) * GPIO * multiple serial interface including DW APB UART * ADC, PWM and eFlash, SRAM and SPI Flash memory * Real-Time Clock (RTC) * Bluetooth module with worldwide regulatory compliance (FCC, IC, CE, ETSI, TELEC) * On-board 9-axis sensor (gyro, accelerometer and compass) Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18 extension header. One of the most interesting features for developers is built-in Digilent USB JTAG probe so only micro-USB cable is needed! [1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit [2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-24 18:37:14 +00:00
dtb-$(CONFIG_TARGET_IOT_DEVKIT) += iot_devkit.dtb
serial-arc: switch to DM Now when all infrastructure in ARC is ready for it let's switch ARC UART to driver model. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
2015-03-17 11:55:14 +00:00
dts: automatically build necessary .dtb files When building for a custom board, it is quite common to maintain a private branch which include some defconfig and .dts files. But to hook up those .dts files requires modifying a file "belonging" to upstream U-Boot, the arch/*/dts/Makefile. Forward-porting that branch to a newer upstream then often results in a conflict which, while it is trivial to resolve by hand, makes it harder to have a CI do "try to build our board against latest upstream". The .config usually includes information on precisely what .dtb(s) are needed, so to avoid having to modify the Makefile, simply add the files in (SPL_)OF_LIST to dtb-y. A technicality is that (SPL_)OF_LIST is not always defined, so rework the Kconfig symbols so that (SPL_)OF_LIST is always defined (when (SPL_)OF_CONTROL), but only prompted for in the cases which used to be their "depends on". nios2 and microblaze already have something like this in their dts/Makefile, and the rationale in commit 41f59f68539 is similar to the above. So this simply generalizes existing practice. Followup patches could remove the logic in those two makefiles, just as there's potential for moving some common boilerplate from all the arch/*/dts/Makefile files to the new scripts/Makefile.dts. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-10 13:34:41 +00:00
include $(srctree)/scripts/Makefile.dts
serial-arc: switch to DM Now when all infrastructure in ARC is ready for it let's switch ARC UART to driver model. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
2015-03-17 11:55:14 +00:00
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb
Reference in a new issue Copy permalink