u-boot/board/pcs440ep/config.mk

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier:	GPL-2.0+
#

#
# PCS440EP board
#

# Check the U-Boot Image with a SHA1 checksum
ALL-y += u-boot.sha1

PLATFORM_CPPFLAGS += -DCONFIG_440=1

ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif

ifeq ($(dbcr),1)
PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
Add support for PCS440EP board Patch by Stefan Roese, 02 Jun 2006 2006-06-02 14:18:04 +00:00			`#`
			`# (C) Copyright 2006`
			`# Wolfgang Denk, DENX Software Engineering, wd@denx.de.`
			`#`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
Add support for PCS440EP board Patch by Stefan Roese, 02 Jun 2006 2006-06-02 14:18:04 +00:00			`#`

			`#`
			`# PCS440EP board`
			`#`

[PCS440EP] upgrade the PCS440EP board: - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de> 2007-06-22 17:11:54 +00:00			`# Check the U-Boot Image with a SHA1 checksum`
kbuild: change out-of-tree build This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de> 2014-02-04 08:24:24 +00:00			`ALL-y += u-boot.sha1`
[PCS440EP] upgrade the PCS440EP board: - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de> 2007-06-22 17:11:54 +00:00
Add support for PCS440EP board Patch by Stefan Roese, 02 Jun 2006 2006-06-02 14:18:04 +00:00			`PLATFORM_CPPFLAGS += -DCONFIG_440=1`

			`ifeq ($(debug),1)`
			`PLATFORM_CPPFLAGS += -DDEBUG`
			`endif`

			`ifeq ($(dbcr),1)`
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2008-10-16 13:01:15 +00:00			`PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000`
Add support for PCS440EP board Patch by Stefan Roese, 02 Jun 2006 2006-06-02 14:18:04 +00:00			`endif`