u-boot/arch/arm/cpu/armv7/omap-common/boot-common.c

/*
 * boot-common.c
 *
 * Common bootmode functions for omap based boards
 *
 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <ahci.h>
#include <spl.h>
#include <asm/omap_common.h>
#include <asm/arch/omap.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
#include <scsi.h>

DECLARE_GLOBAL_DATA_PTR;

void save_omap_boot_params(void)
{
	u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
	u8 boot_device;
	u32 dev_desc, dev_data;

	if ((rom_params <  NON_SECURE_SRAM_START) ||
	    (rom_params > NON_SECURE_SRAM_END))
		return;

	/*
	 * rom_params can be type casted to omap_boot_parameters and
	 * used. But it not correct to assume that romcode structure
	 * encoding would be same as u-boot. So use the defined offsets.
	 */
	boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));

#if defined(BOOT_DEVICE_NAND_I2C)
	/*
	 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
	 * Otherwise the SPL boot IF can't handle this device correctly.
	 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
	 * Draco leads to this boot-device passed to SPL from the BootROM.
	 */
	if (boot_device == BOOT_DEVICE_NAND_I2C)
		boot_device = BOOT_DEVICE_NAND;
#endif
	gd->arch.omap_boot_params.omap_bootdevice = boot_device;

	gd->arch.omap_boot_params.ch_flags =
				*((u8 *)(rom_params + CH_FLAGS_OFFSET));

	if ((boot_device >= MMC_BOOT_DEVICES_START) &&
	    (boot_device <= MMC_BOOT_DEVICES_END)) {
#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \
	!defined(CONFIG_AM43XX)
		if ((omap_hw_init_context() ==
				      OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
			gd->arch.omap_boot_params.omap_bootmode =
			*((u8 *)(rom_params + BOOT_MODE_OFFSET));
		} else
#endif
		{
			dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
			dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
			gd->arch.omap_boot_params.omap_bootmode =
					*((u32 *)(dev_data + BOOT_MODE_OFFSET));
		}
	}

#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
	/*
	 * We get different values for QSPI_1 and QSPI_4 being used, but
	 * don't actually care about this difference.  Rather than
	 * mangle the later code, if we're coming in as QSPI_4 just
	 * change to the QSPI_1 value.
	 */
	if (gd->arch.omap_boot_params.omap_bootdevice == 11)
		gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI;
#endif
}

#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
	return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
}

u32 spl_boot_mode(void)
{
	u32 val = gd->arch.omap_boot_params.omap_bootmode;

	if (val == MMCSD_MODE_RAW)
		return MMCSD_MODE_RAW;
	else if (val == MMCSD_MODE_FS)
		return MMCSD_MODE_FS;
	else
#ifdef CONFIG_SUPPORT_EMMC_BOOT
		return MMCSD_MODE_EMMCBOOT;
#else
		return MMCSD_MODE_UNDEFINED;
#endif
}

void spl_board_init(void)
{
	/*
	 * Save the boot parameters passed from romcode.
	 * We cannot delay the saving further than this,
	 * to prevent overwrites.
	 */
	save_omap_boot_params();

	/* Prepare console output */
	preloader_console_init();

#ifdef CONFIG_SPL_NAND_SUPPORT
	gpmc_init();
#endif
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
	arch_misc_init();
#endif
#if defined(CONFIG_HW_WATCHDOG)
	hw_watchdog_init();
#endif
#ifdef CONFIG_AM33XX
	am33xx_spl_board_init();
#endif
}

int board_mmc_init(bd_t *bis)
{
	switch (spl_boot_device()) {
	case BOOT_DEVICE_MMC1:
		omap_mmc_init(0, 0, 0, -1, -1);
		break;
	case BOOT_DEVICE_MMC2:
	case BOOT_DEVICE_MMC2_2:
		omap_mmc_init(1, 0, 0, -1, -1);
		break;
	}
	return 0;
}

void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
	image_entry_noargs_t image_entry =
			(image_entry_noargs_t) spl_image->entry_point;

	debug("image entry point: 0x%X\n", spl_image->entry_point);
	/* Pass the saved boot_params from rom code */
	image_entry((u32 *)&gd->arch.omap_boot_params);
}
#endif

#ifdef CONFIG_SCSI_AHCI_PLAT
void arch_preboot_os(void)
{
	ahci_reset((void __iomem *)DWC_AHSATA_BASE);
}
#endif

#if defined(CONFIG_CMD_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE)
int fb_set_reboot_flag(void)
{
	printf("Setting reboot to fastboot flag ...\n");
	setenv("dofastboot", "1");
	saveenv();
	return 0;
}
#endif