Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-19 17:53:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/gateworks/gw_ventana/common.h

86 lines
2.1 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
/*
* Copyright (C) 2013 Gateworks Corporation
*
* Author: Tim Harvey <tharvey@gateworks.com>
*/
#ifndef _GWVENTANA_COMMON_H_
#define _GWVENTANA_COMMON_H_
board: gateworks: gw_ventana: use comomn GSC driver Use the common GSC driver. This allows us to do some additional cleanup: - use the GSC driver functions - move waiting for the EEPROM to the SPL int (it will always be ready after this) - move eeprom functions into eeprom file and elimate GSC_I2C_BUS - eliminate some redundant EEPROM reads (the EEPROM must be read in SPL before relocation, in SPL after relocation, and in U-Boot init. All subsequent uses can use the global structure) - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-13 16:29:16 +00:00
#include "eeprom.h"
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
/* GPIO's common to all baseboards */
#define GP_RS232_EN IMX_GPIO_NR(2, 11)
#define GP_MSATA_SEL IMX_GPIO_NR(2, 8)
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define SPI_PAD_CTRL (PAD_CTL_HYS | \
PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define IRQ_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST)
imx: ventana: various board-specific GPIO config updates - Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x) - Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is done regardless of USB being initialized in bootloader - Added usb_sel iomux/hwconfig for GW552x - Fixed mezzanine DIO for GW54xx - Fixed PANLEDR# for GW54xx - Fixed dio iomux/hwconfig for GW552x - Fixed dio iomux for GW551x - removed redundant #define Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 18:04:54 +00:00
#define DIO_PAD_CFG (MUX_PAD_CTRL(IRQ_PAD_CTRL) | MUX_MODE_SION)
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/*
imx: ventana: make number of digital I/O's dynamic Replace the static list of board-specific digital I/O's with a dynamic list. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-15 14:14:23 +00:00
* each baseboard has an optional set user configurable Digital IO lines which
* can be pinmuxed as a GPIO or in some cases a PWM
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
*/
struct dio_cfg {
iomux_v3_cfg_t gpio_padmux[2];
unsigned gpio_param;
iomux_v3_cfg_t pwm_padmux[2];
unsigned pwm_param;
};
struct ventana {
/* pinmux */
iomux_v3_cfg_t const *gpio_pads;
int num_pads;
/* DIO pinmux/val */
imx: ventana: make number of digital I/O's dynamic Replace the static list of board-specific digital I/O's with a dynamic list. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-15 14:14:23 +00:00
struct dio_cfg *dio_cfg;
int dio_num;
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
/* various gpios (0 if non-existent) */
int mezz_pwren;
int mezz_irq;
int rs485en;
int gps_shdn;
int dioi2c_en;
int pcie_sson;
int usb_sel;
int wdis;
imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit The MSATA feature is a board-specific feature on Gateworks Ventana boards. In most cases a 2:1 mux will steer either PCIe or SATA to a miniPCIe socket through an MSATA_EN gpio. In these such cases assign the gpio in the board specific struct and use its presence to determine if we default the GPIO to PCIe and if we later steer it according to hwconfig. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 18:03:56 +00:00
int msata_en;
imx: ventana: make RS232 enable board specific Not all Ventana boards have an RS232 transceiver, make it board specific. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-15 14:14:22 +00:00
int rs232_en;
imx: ventana: make SD3_VSELECT board specific Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-13 15:51:08 +00:00
int vsel_pin;
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
int mmc_cd;
imx: ventana: make RS232 enable board specific Not all Ventana boards have an RS232 transceiver, make it board specific. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-15 14:14:22 +00:00
/* various features */
imx: ventana: add fdt fixup to enable UHS-I support on selected boards UHS-I support is available on Ventana boards with micro-SD sockets depending on the board revision. For backwards compatibility to not break users who have old bootloaders and newer kernels the device-tree on boards with microSD disables UHS-I support by default by defining the no-1-8-v property in the esdhc controller node. For models/revisions that support switchable 1.8V/3.3V I/O which is detectable by the presence of a pull-down on the SD3_VSELECT pin we remove that property to enable support in the kernel. Additionally we add SD3_VSELECT to the pinmux for clarity (even though U-Boot does not currently support UHS-I modes requiring 1.8V I/O). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 18:03:59 +00:00
bool usd_vsel;
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
};
extern struct ventana gpio_cfg[GW_UNKNOWN];
/* configure gpio iomux/defaults */
board: gateworks: gw_ventana: use comomn GSC driver Use the common GSC driver. This allows us to do some additional cleanup: - use the GSC driver functions - move waiting for the EEPROM to the SPL int (it will always be ready after this) - move eeprom functions into eeprom file and elimate GSC_I2C_BUS - eliminate some redundant EEPROM reads (the EEPROM must be read in SPL before relocation, in SPL after relocation, and in U-Boot init. All subsequent uses can use the global structure) - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-13 16:29:16 +00:00
void setup_iomux_gpio(int board);
imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-09 01:28:35 +00:00
#endif /* #ifndef _GWVENTANA_COMMON_H_ */
Reference in a new issue Copy permalink