Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 10:48:51 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/i2c/Makefile

58 lines
2.3 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
drivers/i2c : move i2c drivers to drivers/i2c Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-20 19:14:18 +00:00
#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
dm: i2c: allow disabling driver model in SPL At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-09 11:52:43 +00:00
obj-$(CONFIG_$(SPL_)DM_I2C) += i2c-uclass.o
i2c: Add a generic driver to generate ACPI info Many I2C devices produce roughly the same ACPI data with just things like the GPIO/interrupt information being different. This can be handled by a generic driver along with some information in the device tree. Add a generic i2c driver for this purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-09-22 18:45:01 +00:00
ifdef CONFIG_ACPIGEN
dm: i2c: allow disabling driver model in SPL At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-09 11:52:43 +00:00
obj-$(CONFIG_$(SPL_)DM_I2C) += acpi_i2c.o
i2c: Add a generic driver to generate ACPI info Many I2C devices produce roughly the same ACPI data with just things like the GPIO/interrupt information being different. This can be handled by a generic driver along with some information in the device tree. Add a generic i2c driver for this purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-09-22 18:45:01 +00:00
endif
sandbox: Fix up building for of-platdata There is no devicetree with of-platdata. Update a few uclasses to allow them to be built for sandbox_spl. Also drop the i2c-gpio from SPL to avoid build errors, since it does not support of-platdata. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-03 17:31:34 +00:00
obj-$(CONFIG_$(SPL_)DM_I2C_GPIO) += i2c-gpio.o
dm: i2c: Allow muxes to be enabled for SPL separately Since I2C muxes are seldom needed in SPL, and the code for this increases the size somewhat, add a separate option to enable I2C muxes for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22 02:43:53 +00:00
obj-$(CONFIG_$(SPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
drivers/i2c : move i2c drivers to drivers/i2c Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-20 19:14:18 +00:00
Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:24 +00:00
obj-$(CONFIG_$(SPL_)SYS_I2C_LEGACY) += i2c_core.o
aspeed: Add I2C Driver Add Device Model based I2C driver for ast2500/ast2400 SoCs. The driver is very limited, it only supports master mode and synchronous byte-by-byte reads/writes, no DMA or Pool Buffers. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2017-04-17 19:00:30 +00:00
obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
i2c: atmel: add i2c driver Add i2c driver. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2016-06-20 05:22:38 +00:00
obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
dm: i2c: Add driver for Cadence I2C IP This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-28 17:47:11 +00:00
obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
i2c: i2c-cortina: added CAxxxx I2C support Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
2020-06-01 19:56:31 +00:00
obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
i2c, davinci: convert driver to new mutlibus/mutliadapter framework - add davinci driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-04-04 17:16:52 +00:00
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
i2c: designware: Convert driver to multibus/multiadapter framework In preparation for the SoCFPGA support of the designware I2C driver, convert this driver to the common CONFIG_SYS_I2C framework. This patch converts all users of this driver, this is: - ST spearxxx boards - AXS101 (ARC700 platform) I couldn't test this patch on those boards. Only compile tested for all spear boards. And tested on SoCFPGA. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Heiko Schocher <hs@denx.de> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-28 11:12:00 +00:00
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
pci: Drop DM_PCI This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 00:54:44 +00:00
ifdef CONFIG_PCI
i2c: designware: Tidy up PCI support This is hacked into the driver at present. It seems better to have it as a separate driver that uses the base driver. Create a new file and put the X86 code into it. Actually the Baytrail settings should really come from the device tree. Note that 'has_max_speed' is added as well. This is currently always false but since only Baytrail provides the config, it does not affect operation for other devices. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:41:40 +00:00
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o
endif
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 08:34:57 +00:00
obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
i2c: IHS I2C master driver IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-03 07:28:18 +00:00
obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
x86: i2c: Add a stub driver for Intel I2C/SMbus This is used on most Intel platforms. We don't have a driver for it yet, but add a stub to handle the init. For now this targets ivybridge so we may want to add a device tree binding and generalise it when other platforms are supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:44 +00:00
obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o
i2c: lpi2c: add lpi2c driver for i.MX7ULP Add lpi2c driver for i.MX7ULP. Need to enable the two options to use this driver: CONFIG_DM_I2C=y CONFIG_SYS_I2C_IMX_LPI2C=y Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-02-24 01:54:18 +00:00
obj-$(CONFIG_SYS_I2C_IMX_LPI2C) += imx_lpi2c.o
drivers: i2c: add brcm iproc I2C driver support Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-08 05:42:27 +00:00
obj-$(CONFIG_SYS_I2C_IPROC) += iproc_i2c.o
i2c: kona: Add Kona I2C driver Add support for the Kona I2C controller found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Tim Kryger <tkryger@linaro.org>
2014-02-11 19:06:36 +00:00
obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
lpc32xx: i2c: add LPC32xx I2C interface support Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-03-31 09:40:45 +00:00
obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o
i2c: add Amlogic Meson driver Add a driver for the I2C controller available on Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2017-10-29 09:09:00 +00:00
obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o
i2c: Add Microchip PolarFire SoC I2C driver Add I2C driver code for the Microchip PolarFire SoC. This driver supports I2C data transfer and probe for I2C slave addresses. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-11-17 12:51:16 +00:00
obj-$(CONFIG_SYS_I2C_MICROCHIP) += i2c-microchip.o
arm: mvebu: a3720: Create Kconfig option for I2C_MV Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-09 17:33:37 +00:00
obj-$(CONFIG_SYS_I2C_MV) += mv_i2c.o
mvtwsi: convert to CONFIG_SYS_I2C framework Note this has only been tested on Allwinner sunxi devices (support for which gets introduced by a later patch). The kirkwood changes have been compile tested using the wireless_space board config, the orion5x changes have been compile tested using the edminiv2 board config. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-06-13 20:55:48 +00:00
obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 08:34:57 +00:00
obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
i2c: add nexell driver Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-10 17:07:28 +00:00
obj-$(CONFIG_SYS_I2C_NEXELL) += nx_i2c.o
i2c: ocores: add i2c driver for OpenCores I2C controller Add support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). This driver implementation is inspired from the Linux OpenCores I2C driver available. Thanks to Peter Korsgaard <peter@korsgaard.com> for writing Linux OpenCores I2C driver. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-14 09:12:34 +00:00
obj-$(CONFIG_SYS_I2C_OCORES) += ocores_i2c.o
i2c: octeon_i2c: Add I2C controller driver for Octeon Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-05-26 12:13:07 +00:00
obj-$(CONFIG_SYS_I2C_OCTEON) += octeon_i2c.o
i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework - add omap24xx driver to new multibus/multiadpater support - adapted all config files, which uses this driver Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here: http://patchwork.ozlabs.org/patch/263211/ Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Tom Rini <trini@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Thomas Weber <weber@corscience.de> Cc: Tom Rix <Tom.Rix@windriver.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Michael Jones <michael.jones@matrix-vision.de> Cc: Raphael Assenat <raph@8d.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
2013-10-22 09:03:18 +00:00
obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
i2c: rcar_i2c: Add DM and DT capable I2C driver Add derivative of the rcar_i2c driver which is capable of probing itself from DM and uses DT. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-21 16:57:28 +00:00
obj-$(CONFIG_SYS_I2C_RCAR_I2C) += rcar_i2c.o
i2c: rcar_iic: Add RCar IIC driver Add driver for the RCar IIC or DVFS I2C controller. This driver is based on the SH I2C driver, but supports DM and DT probing as well as modern I2C framework API. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-28 07:02:27 +00:00
obj-$(CONFIG_SYS_I2C_RCAR_IIC) += rcar_iic.o
rockchip: Add I2C driver Add an I2C driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-30 22:55:39 +00:00
obj-$(CONFIG_SYS_I2C_ROCKCHIP) += rk_i2c.o
samsung: i2c: Split the high-speed I2C code into a new driver Now that driver model is used for I2C on all boards, we can split the high-speed code into its own driver. There is virtually no common code, and this significantly reduces confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-11-23 13:34:43 +00:00
obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o exynos_hs_i2c.o
dm: i2c: Add a sandbox I2C driver This driver includes some test features such as only supporting certain bus speeds. It passes its I2C traffic through to an emulator. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-10 15:55:50 +00:00
obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o
i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework This updates to new I2C framwwork on sh_i2c. And this also updates boards(kzm9g and ecovec) that using sh_i2c. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2013-10-29 04:33:51 +00:00
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 08:34:57 +00:00
obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
i2c: add i2c driver for stm32 Add i2c driver which can be used on both STM32F7 and STM32H7. This I2C block supports the following features: _ Slave and master modes _ Multimaster capability _ Standard-mode (up to 100 kHz) _ Fast-mode (up to 400 kHz) _ Fast-mode Plus (up to 1 MHz) _ 7-bit and 10-bit addressing mode _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask) _ All 7-bit addresses acknowledge mode _ General call _ Programmable setup and hold times _ Easy to use event management _ Optional clock stretching _ Software reset Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-09 12:45:27 +00:00
obj-$(CONFIG_SYS_I2C_STM32F7) += stm32f7_i2c.o
i2c: Add a DM_I2C driver for the sun6i P2WI controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:20 +00:00
obj-$(CONFIG_SYS_I2C_SUN6I_P2WI) += sun6i_p2wi.o
i2c: Add a DM_I2C driver for the sun8i RSB controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:21 +00:00
obj-$(CONFIG_SYS_I2C_SUN8I_RSB) += sun8i_rsb.o
i2c: synquacer: SNI Synquacer I2C controller Add driver for class of I2C controllers found on Socionext Synquacer platform. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-04 09:44:48 +00:00
obj-$(CONFIG_SYS_I2C_SYNQUACER) += synquacer_i2c.o
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 08:34:57 +00:00
obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
i2c: UniPhier: add driver for UniPhier i2c controller This commit adds on-chip I2C driver used on some old Panasonic UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-13 03:44:36 +00:00
obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o
i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller This commit adds on-chip I2C driver used on newer SoCs of Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-13 03:44:37 +00:00
obj-$(CONFIG_SYS_I2C_UNIPHIER_F) += i2c-uniphier-f.o
i2c: fix: Add support for the Arm's Versatile Express I2C controller accidentially while fixing merge errors for patch: https://lists.denx.de/pipermail/u-boot/2018-September/342278.html missed to add files: MAINTAINERS drivers/i2c/Kconfig drivers/i2c/Makefile add them with this patch. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-10-11 05:26:33 +00:00
obj-$(CONFIG_SYS_I2C_VERSATILE) += i2c-versatile.o
i2c: xiic: Add Xilinx AXI I2C driver Add Xilinx AXI I2C controller driver based on the Linux i2c-xiic driver. This driver is stripped of all the IRQ handling and uses pure polling, yet tries to retain most of the structure of the Linux driver to make backporting of fixes easy. Note that the IP has a known limitation on 255 bytes read and write, according to xilinx this is still being worked on [1]. [1] https://forums.xilinx.com/t5/Embedded-Processor-System-Design/AXI-IIC-V2-0-I2C-Master-Reading-multiple-bytes-from-I2C-slave/m-p/854419/highlight/true#M39387 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-19 11:26:27 +00:00
obj-$(CONFIG_SYS_I2C_XILINX_XIIC) += xilinx_xiic.o
i2c: add Tegra186 BPMP driver On Tegra186, some I2C controllers are directly controlled by the main CPU, whereas others are controlled by the BPMP, and can only be accessed by the main CPU via IPC requests to the BPMP. This driver covers the latter case. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-08 17:28:27 +00:00
obj-$(CONFIG_TEGRA186_BPMP_I2C) += tegra186_bpmp_i2c.o
dm: i2c: Add support for multiplexed I2C buses Add a new I2C_MUX uclass. Devices in this class can multiplex between several I2C buses, selecting them one at a time for use by the system. The multiplexing mechanism is left to the driver to decide - it may be controlled by GPIOs, for example. The uclass supports only two methods: select() and deselect(). The current mux state is expected to be stored in the mux itself since it is the only thing that knows how to make things work. The mux can record the current state and then avoid switching unless it is necessary. So select() can be skipped if the mux is already in the correct state. Also deselect() can be made a nop if required. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:21 +00:00
Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x Fix for the case of a U-Boot configuration with CONFIG_SPL, CONFIG_I2C_MUX, CONFIG_I2C_MUX_PCA954x, no CONFIG_SPL_DM and no CONFIG_SPL_I2C_MUX. Without this fix linking of pca954x fails because dm_write_i2c does not exist because CONFIG_SPL_DM is not defined. Signed-off-by: Kees Trommel <kees.trommel.contractor@draeger.com> Cc: Heiko Schocher <hs@denx.de>
2020-08-03 14:49:47 +00:00
obj-$(CONFIG_$(SPL_)I2C_MUX) += muxes/
Reference in a new issue Copy permalink