Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 05:04:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/MPC8349ITX_defconfig

196 lines
5 KiB
Text
Raw Normal View History

kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_PPC=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0xFEF00000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x10000
mpc83xx: Get rid of CONFIG_83XX_CLKIN MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the system clock. To migrate the architecture, we can replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. To do this * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all MPC83xx config files Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:53 +00:00
CONFIG_SYS_CLK_FREQ=66666666
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_MPC83xx=y
powerpc: Migrate HIGH_BATS to Kconfig Migrate the CONFIG_HIGH_BATS variable to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:56 +00:00
CONFIG_HIGH_BATS=y
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_TARGET_MPC8349ITX=y
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
CONFIG_DDR_MC_CLOCK_MODE_1_1=y
CONFIG_SYSTEM_PLL_FACTOR_4_1=y
CONFIG_CORE_PLL_RATIO_2_1=y
CONFIG_PCI_HOST_MODE_ENABLE=y
CONFIG_PCI_INT_ARBITER1_ENABLE=y
CONFIG_PCI_INT_ARBITER2_ENABLE=y
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
CONFIG_TSEC1_MODE_GMII=y
CONFIG_TSEC2_MODE_GMII=y
mpc83xx: Migrate BATS config to Kconfig The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:57 +00:00
CONFIG_BAT0=y
CONFIG_BAT0_NAME="SDRAM"
CONFIG_BAT0_BASE=0x00000000
CONFIG_BAT0_LENGTH_256_MBYTES=y
CONFIG_BAT0_ACCESS_RW=y
CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
CONFIG_BAT0_USER_MODE_VALID=y
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
CONFIG_BAT1=y
CONFIG_BAT1_NAME="PCI1_MEM"
CONFIG_BAT1_BASE=0x80000000
CONFIG_BAT1_LENGTH_256_MBYTES=y
CONFIG_BAT1_ACCESS_RW=y
CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y
CONFIG_BAT1_USER_MODE_VALID=y
CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
CONFIG_BAT2=y
CONFIG_BAT2_NAME="PCI1_MMIO"
CONFIG_BAT2_BASE=0x90000000
CONFIG_BAT2_LENGTH_256_MBYTES=y
CONFIG_BAT2_ACCESS_RW=y
CONFIG_BAT2_ICACHE_INHIBITED=y
CONFIG_BAT2_ICACHE_GUARDED=y
CONFIG_BAT2_DCACHE_INHIBITED=y
CONFIG_BAT2_DCACHE_GUARDED=y
CONFIG_BAT2_USER_MODE_VALID=y
CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
CONFIG_BAT3=y
CONFIG_BAT3_NAME="PCI2_MEM"
CONFIG_BAT3_BASE=0xA0000000
CONFIG_BAT3_LENGTH_256_MBYTES=y
CONFIG_BAT3_ACCESS_RW=y
CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y
CONFIG_BAT3_USER_MODE_VALID=y
CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
CONFIG_BAT4=y
CONFIG_BAT4_NAME="PCI2_MMIO"
CONFIG_BAT4_BASE=0xB0000000
CONFIG_BAT4_LENGTH_256_MBYTES=y
CONFIG_BAT4_ACCESS_RW=y
CONFIG_BAT4_ICACHE_INHIBITED=y
CONFIG_BAT4_ICACHE_GUARDED=y
CONFIG_BAT4_DCACHE_INHIBITED=y
CONFIG_BAT4_DCACHE_GUARDED=y
CONFIG_BAT4_USER_MODE_VALID=y
CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
CONFIG_BAT5=y
CONFIG_BAT5_NAME="IMMR"
CONFIG_BAT5_BASE=0xE0000000
CONFIG_BAT5_LENGTH_256_MBYTES=y
CONFIG_BAT5_ACCESS_RW=y
CONFIG_BAT5_ICACHE_INHIBITED=y
CONFIG_BAT5_ICACHE_GUARDED=y
CONFIG_BAT5_DCACHE_INHIBITED=y
CONFIG_BAT5_DCACHE_GUARDED=y
CONFIG_BAT5_USER_MODE_VALID=y
CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
CONFIG_BAT6=y
CONFIG_BAT6_NAME="STACK_IN_DCACHE"
CONFIG_BAT6_BASE=0xF0000000
CONFIG_BAT6_LENGTH_256_MBYTES=y
CONFIG_BAT6_ACCESS_RW=y
CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT6_ICACHE_GUARDED=y
CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
CONFIG_BAT6_DCACHE_GUARDED=y
CONFIG_BAT6_USER_MODE_VALID=y
CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
mpc83xx: Migrate LBLAW_* to Kconfig The LBLAW_* values determine the window configuration of the memory controller. Hence, they must be known at compile time, and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:58 +00:00
CONFIG_LBLAW0=y
CONFIG_LBLAW0_BASE=0xFE000000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_16_MBYTES=y
CONFIG_LBLAW1=y
CONFIG_LBLAW1_BASE=0xF8000000
CONFIG_LBLAW1_NAME="VSC7385"
CONFIG_LBLAW1_LENGTH_128_KBYTES=y
CONFIG_LBLAW3=y
CONFIG_LBLAW3_BASE=0xF0000000
CONFIG_LBLAW3_NAME="CF"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-26 18:45:25 +00:00
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_16_MBYTES=y
CONFIG_OR0_XAM_SET=y
CONFIG_OR0_SCY_15=y
CONFIG_OR0_CSNT_EARLIER=y
CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_XACS_EXTENDED=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EHTR_8_CYCLE=y
CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="VSC7385"
CONFIG_BR1_OR1_BASE=0xF8000000
CONFIG_OR1_AM_128_KBYTES=y
CONFIG_OR1_SCY_15=y
CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_XACS_EXTENDED=y
CONFIG_OR1_SETA_EXTERNAL=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EHTR_8_CYCLE=y
CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="LED"
CONFIG_BR2_OR2_BASE=0xF9000000
CONFIG_OR2_AM_2_MBYTES=y
CONFIG_OR2_SCY_9=y
CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="CF"
CONFIG_BR3_OR3_BASE=0xF0000000
CONFIG_BR3_PORTSIZE_16BIT=y
CONFIG_BR3_MACHINE_UPMA=y
CONFIG_OR3_BI_BURSTINHIBIT=y
mpc83xx: Migrate HID config to Kconfig Mirate the HID configuration settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:09 +00:00
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
mpc83xx: Migrate arbiter config to Kconfig Migrate the arbiter configuration to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:12 +00:00
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
mpc83xx: Migrate SPCR to Kconfig Migrate the SPCR setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:13 +00:00
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-26 18:45:25 +00:00
CONFIG_LCRR_DBYP_PLL_BYPASSED=y
CONFIG_LCRR_CLKDIV_4=y
Kconfig: Move CONFIG_FIT and related options to Kconfig There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-23 05:55:43 +00:00
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-07 06:31:14 +00:00
CONFIG_BOOTDELAY=6
common: Move CONFIG_BOOTARGS to Kconfig Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 17:22:17 +00:00
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200"
Convert CONFIG_MISC_INIT_R to Kconfig This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-29 18:13:29 +00:00
CONFIG_MISC_INIT_R=y
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 01:37:19 +00:00
CONFIG_HUSH_PARSER=y
kconfig: add config option for shell prompt Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-03 09:36:58 +00:00
CONFIG_SYS_PROMPT="MPC8349E-mITX> "
cmd: Toggle the default value of CONFIG_CMD_IMLS Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-08 18:48:01 +00:00
CONFIG_CMD_IMLS=y
Convert CONFIG_CMD_IDE to Kconfig This converts the following to Kconfig: CONFIG_CMD_IDE Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:29 +00:00
CONFIG_CMD_IDE=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_I2C=y
Convert CONFIG_CMD_PCI to Kconfig This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:34 +00:00
CONFIG_CMD_PCI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_SATA=y
Convert CONFIG_CMD_SDRAM to Kconfig This converts the following to Kconfig: CONFIG_CMD_SDRAM Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:45 +00:00
CONFIG_CMD_SDRAM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_USB=y
Reorder defconfigs with 'savedefconfig' Some boards' defconfigs are disordered. Reorder them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-09-28 12:14:15 +00:00
# CONFIG_CMD_SETEXPR is not set
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_CACHE=y
cmd: add Kconfig option for 'date' command Signed-off-by: Chris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-29 03:20:28 +00:00
CONFIG_CMD_DATE=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_ADDR=0xFEF80000
ata: Migrate CONFIG_SATA_SIL3114 to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-08 13:36:15 +00:00
CONFIG_SATA_SIL3114=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-13 17:48:42 +00:00
# CONFIG_MMC is not set
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
CONFIG_MTD_NOR_FLASH=y
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-14 20:10:50 +00:00
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
Convert CONFIG_PHYLIB et al to Kconfig This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-24 19:35:53 +00:00
CONFIG_PHY_ATHEROS=y
CONFIG_PHY_BROADCOM=y
CONFIG_PHY_DAVICOM=y
CONFIG_PHY_LXT=y
treewide: Move CONFIG_PHY_MARVELL to Kconfig The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards already had it in their Kconfig), but had not been moved for older boards. Move it to the defconfigs for all boards. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-27 12:52:21 +00:00
CONFIG_PHY_MARVELL=y
Convert CONFIG_PHYLIB et al to Kconfig This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-24 19:35:53 +00:00
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_SMSC=y
CONFIG_PHY_VITESSE=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
treewide: Migrate CONFIG_TSEC_ENET to Kconfig Migrate the CONFIG_TSEC_ENET option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 12:38:18 +00:00
CONFIG_TSEC_ENET=y
ns16550: move CONFIG_SYS_NS16550 to Kconfig Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-19 13:48:14 +00:00
CONFIG_SYS_NS16550=y
configs: Migrate CONFIG_USB_STORAGE In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:31:26 +00:00
CONFIG_USB=y
Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-13 02:33:28 +00:00
CONFIG_USB_EHCI_HCD=y
configs: Migrate CONFIG_USB_STORAGE In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:31:26 +00:00
CONFIG_USB_STORAGE=y
Move CONFIG_OF_LIBFDT to Kconfig Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:42 +00:00
CONFIG_OF_LIBFDT=y
Reference in a new issue Copy permalink