Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 10:18:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-omap2/boot-common.c

334 lines
8 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
/*
* boot-common.c
*
* Common bootmode functions for omap based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <common.h>
arm: omap: reset sata on boot On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA device if it is used by U-Boot. It happens because U-Boot does not reset SATA controller before boot. Reset the controller on OS boot so that Linux will have a clean state to work with. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2014-12-15 14:02:58 +00:00
#include <ahci.h>
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:05 +00:00
#include <log.h>
arm: mach-omap2: load/start remoteproc IPU1/IPU2 First check the presence of the ipu firmware in the boot partition. If present enable the ipu and the related clocks & then move on to load the firmware and eventually start remoteproc IPU1/IPU2. do_enable_clocks by default puts the clock domains into auto which does not work well with reset. Hence adding do_enable_ipu_clocks function. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix IPU1_LOAD_ADDR and compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:52 +00:00
#include <dm/uclass.h>
#include <fs_loader.h>
SPL: Move the omap SPL framework to common/spl Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-13 19:03:19 +00:00
#include <spl.h>
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-31 03:38:53 +00:00
#include <asm/global_data.h>
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
#include <asm/omap_common.h>
#include <asm/arch/omap.h>
ARM: SPL: Make spl_mmc.c more generic Move the default omap/related-centric board_mmc_init to arch/arm/cpu/armv7/omap-common/boot-common.c and move the type defines to <asm/spl.h>. Also use mmc->read_bl_len rather than MMCSD_SECTOR_SIZE Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 17:25:15 +00:00
#include <asm/arch/mmc_host_def.h>
OMAP: include sys_proto.h from boot-common Include asm/arch/sys_proto.h for gpmc_init prototype. Without this we get a warning while building for AM335x. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-06 13:06:28 +00:00
#include <asm/arch/sys_proto.h>
am335x: Enable CONFIG_OMAP_WATCHDOG support There is a board-specific portion for calling watchdog enable itself, in main U-Boot. Signed-off-by: Tom Rini <trini@ti.com>
2013-10-01 16:32:04 +00:00
#include <watchdog.h>
arm: omap: reset sata on boot On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA device if it is used by U-Boot. It happens because U-Boot does not reset SATA controller before boot. Reset the controller on OS boot so that Linux will have a clean state to work with. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2014-12-15 14:02:58 +00:00
#include <scsi.h>
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#include <i2c.h>
arm: mach-omap2: load/start remoteproc IPU1/IPU2 First check the presence of the ipu firmware in the boot partition. If present enable the ipu and the related clocks & then move on to load the firmware and eventually start remoteproc IPU1/IPU2. do_enable_clocks by default puts the clock domains into auto which does not work well with reset. Hence adding do_enable_ipu_clocks function. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix IPU1_LOAD_ADDR and compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:52 +00:00
#include <remoteproc.h>
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
ARM: OMAP: Cleanup boot parameters usage The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
2013-04-24 00:41:24 +00:00
DECLARE_GLOBAL_DATA_PTR;
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
arm: mach-omap2: load/start remoteproc IPU1/IPU2 First check the presence of the ipu firmware in the boot partition. If present enable the ipu and the related clocks & then move on to load the firmware and eventually start remoteproc IPU1/IPU2. do_enable_clocks by default puts the clock domains into auto which does not work well with reset. Hence adding do_enable_ipu_clocks function. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix IPU1_LOAD_ADDR and compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:52 +00:00
#define IPU1_LOAD_ADDR (0xa17ff000)
#define MAX_REMOTECORE_BIN_SIZE (8 * 0x100000)
#define IPU2_LOAD_ADDR (IPU1_LOAD_ADDR + MAX_REMOTECORE_BIN_SIZE)
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
__weak u32 omap_sys_boot_device(void)
{
return BOOT_DEVICE_NONE;
}
am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c We need to call the save_omap_boot_params function on am33xx/ti81xx and other newer TI SoCs, so move the function to boot-common. Only OMAP4+ has the omap_hw_init_context function so add ifdefs to not call it on am33xx/ti81xx. Call save_omap_boot_params from s_init on am33xx/ti81xx boards. Reviewed-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-31 16:31:59 +00:00
void save_omap_boot_params(void)
{
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
struct omap_boot_parameters *omap_boot_params;
omap-common: SYS_BOOT fallback logic correction and support for more devices The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again. For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this. In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-08-27 08:46:09 +00:00
int sys_boot_device = 0;
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
u32 boot_device;
u32 boot_mode;
am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c We need to call the save_omap_boot_params function on am33xx/ti81xx and other newer TI SoCs, so move the function to boot-common. Only OMAP4+ has the omap_hw_init_context function so add ifdefs to not call it on am33xx/ti81xx. Call save_omap_boot_params from s_init on am33xx/ti81xx boards. Reviewed-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-31 16:31:59 +00:00
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c We need to call the save_omap_boot_params function on am33xx/ti81xx and other newer TI SoCs, so move the function to boot-common. Only OMAP4+ has the omap_hw_init_context function so add ifdefs to not call it on am33xx/ti81xx. Call save_omap_boot_params from s_init on am33xx/ti81xx boards. Reviewed-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-31 16:31:59 +00:00
return;
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
omap_boot_params = (struct omap_boot_parameters *)boot_params;
boot_device = omap_boot_params->boot_device;
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
boot_mode = MMCSD_MODE_UNDEFINED;
/* Boot device */
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#ifdef BOOT_DEVICE_NAND_I2C
arm: am33xx: Handle NAND+I2C boot-device the same way as NAND Re-map NAND&I2C boot-device to the "normal" NAND boot-device. Otherwise the SPL boot IF can't handle this device correctly. Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens Draco leads to this boot-device passed to SPL from the BootROM. With this change, Draco boots just fine into main U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Samuel Egli <samuel.egli@siemens.com>
2014-11-12 10:57:33 +00:00
/*
* Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
* Otherwise the SPL boot IF can't handle this device correctly.
* Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
* Draco leads to this boot-device passed to SPL from the BootROM.
*/
if (boot_device == BOOT_DEVICE_NAND_I2C)
boot_device = BOOT_DEVICE_NAND;
#endif
omap-common: Boot device define instead of hardcoded value Now that SPL boot devices are clearly defined, we can use BOOT_DEVICE_QSPI_4 instead of a hardcoded value. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:21 +00:00
#ifdef BOOT_DEVICE_QSPI_4
dra7xx_evm: Add QSPI_4 support, qspiboot build target We previously only supported QSPI_1 (single) support. Add QSPI_4 (quad) read support as well. This means we can be given one of two boot device values, but don't care which it is, so perform a fixup on the QSPI_4 value. We add a qspiboot build target to better show how you would use QSPI as a boot device in deployment. When we boot from QSPI, we can check the environment for 'boot_os' to control Falcon Mode. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2014-04-03 11:52:56 +00:00
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
* mangle the later code, if we're coming in as QSPI_4 just
* change to the QSPI_1 value.
*/
omap-common: Boot device define instead of hardcoded value Now that SPL boot devices are clearly defined, we can use BOOT_DEVICE_QSPI_4 instead of a hardcoded value. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:21 +00:00
if (boot_device == BOOT_DEVICE_QSPI_4)
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
boot_device = BOOT_DEVICE_SPI;
ti816x: Add additional boot device detection logic It has been observed that between PG1.0 and PG2.0/2.1 depending on which device we boot from, we may see a different value here than is documented in the TRM. Update the values for NAND and MMC1 based on real life usage on each revision. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-15 17:57:00 +00:00
#endif
#ifdef CONFIG_TI816X
/*
* On PG2.0 and later TI816x the values we get when booting are not the
* same as on PG1.0, which is what the defines are based on. Update
* them as needed.
*/
if (get_cpu_rev() != 1) {
if (boot_device == 0x05) {
omap_boot_params->boot_device = BOOT_DEVICE_NAND;
boot_device = BOOT_DEVICE_NAND;
}
if (boot_device == 0x08) {
omap_boot_params->boot_device = BOOT_DEVICE_MMC1;
boot_device = BOOT_DEVICE_MMC1;
}
}
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#endif
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
/*
* When booting from peripheral booting, the boot device is not usable
* as-is (unless there is support for it), so the boot device is instead
* figured out using the SYS_BOOT pins.
*/
switch (boot_device) {
omap-common: SYS_BOOT fallback logic correction and support for more devices The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again. For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this. In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-08-27 08:46:09 +00:00
#if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)
case BOOT_DEVICE_UART:
sys_boot_device = 1;
break;
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
#endif
usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL, makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE. Everything that is not part of the usb storage support in SPL is now build under SPL_USB_HOST_SUPPORT. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-01 16:40:07 +00:00
#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
omap-common: SYS_BOOT fallback logic correction and support for more devices The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again. For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this. In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-08-27 08:46:09 +00:00
case BOOT_DEVICE_USB:
sys_boot_device = 1;
break;
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
#endif
spl: Kconfig: Rename SPL_USBETH_SUPPORT to SPL_USB_ETHER to match with the U-boot CONFIG Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER. This enables users to block text using CONFIG_IS_ENABLED() instead of resorting to #if ladders with SPL and non-SPL cases. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-16 15:47:44 +00:00
#if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USB_ETHER)
omap-common: SYS_BOOT fallback logic correction and support for more devices The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again. For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this. In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-08-27 08:46:09 +00:00
case BOOT_DEVICE_USBETH:
sys_boot_device = 1;
break;
#endif
Rename SPL_ETH_SUPPORT to SPL_ETH Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:26 +00:00
#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH)
omap-common: SYS_BOOT fallback logic correction and support for more devices The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again. For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this. In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-08-27 08:46:09 +00:00
case BOOT_DEVICE_CPGMAC:
sys_boot_device = 1;
break;
dra7x: boot: add dfu bootmode support This patch enables the DFU boot mode support for dra7x platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-28 12:09:17 +00:00
#endif
spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-17 19:43:02 +00:00
#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
dra7x: boot: add dfu bootmode support This patch enables the DFU boot mode support for dra7x platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-28 12:09:17 +00:00
case BOOT_DEVICE_DFU:
sys_boot_device = 1;
break;
omap-common: SYS_BOOT fallback logic correction and support for more devices The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again. For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this. In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-08-27 08:46:09 +00:00
#endif
}
if (sys_boot_device) {
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
boot_device = omap_sys_boot_device();
/* MMC raw mode will fallback to FS mode. */
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END))
boot_mode = MMCSD_MODE_RAW;
}
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
gd->arch.omap_boot_device = boot_device;
/* Boot mode */
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
#ifdef CONFIG_OMAP34XX
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
switch (boot_device) {
case BOOT_DEVICE_MMC1:
Revert "omap3: Use raw SPL by default for mmc1" Unfortunately with this change we now are unable to do FS mode boots from MMC1 as with the way the code works today we will always load and assume that the hard-coded raw location contains U-Boot. Further, we cannot fix this by just changing other logic to try FS-then-RAW as it would also make us have to ignore what order the ROM is telling us to try. This reverts commit 22d90d560a2b01c47f180e196e6c6485eb8e65db. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-02 14:52:51 +00:00
boot_mode = MMCSD_MODE_FS;
break;
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
case BOOT_DEVICE_MMC2:
boot_mode = MMCSD_MODE_RAW;
break;
}
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
}
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#else
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
/*
* If the boot device was dynamically changed and doesn't match what
* the bootrom initially booted, we cannot use the boot device
* descriptor to figure out the boot mode.
*/
if ((boot_device == omap_boot_params->boot_device) &&
(boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
boot_params = omap_boot_params->boot_device_descriptor;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET));
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET));
if (boot_mode != MMCSD_MODE_FS &&
boot_mode != MMCSD_MODE_RAW)
#ifdef CONFIG_SUPPORT_EMMC_BOOT
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
boot_mode = MMCSD_MODE_EMMCBOOT;
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#else
boot_mode = MMCSD_MODE_UNDEFINED;
#endif
}
omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:23 +00:00
#endif
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
gd->arch.omap_boot_mode = boot_mode;
#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
!defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
/* CH flags */
gd->arch.omap_ch_flags = omap_boot_params->ch_flags;
dra7xx_evm: Add QSPI_4 support, qspiboot build target We previously only supported QSPI_1 (single) support. Add QSPI_4 (quad) read support as well. This means we can be given one of two boot device values, but don't care which it is, so perform a fixup on the QSPI_4 value. We add a qspiboot build target to better show how you would use QSPI as a boot device in deployment. When we boot from QSPI, we can check the environment for 'boot_os' to control Falcon Mode. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2014-04-03 11:52:56 +00:00
#endif
am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c We need to call the save_omap_boot_params function on am33xx/ti81xx and other newer TI SoCs, so move the function to boot-common. Only OMAP4+ has the omap_hw_init_context function so add ifdefs to not call it on am33xx/ti81xx. Call save_omap_boot_params from s_init on am33xx/ti81xx boards. Reviewed-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-05-31 16:31:59 +00:00
}
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
#ifdef CONFIG_SPL_BUILD
ARM: SPL: Rename omap_boot_device to spl_boot_device Signed-off-by: Tom Rini <trini@ti.com>
2012-08-13 19:53:23 +00:00
u32 spl_boot_device(void)
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
{
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
return gd->arch.omap_boot_device;
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
}
spl: mmc: extend spl_mmc_boot_mode() to take mmc argument Platforms can overwrite the weak definition of spl_mmc_boot_mode() to determine where to load U-Boot proper from. For most of them this is a trivial decision based on Kconfig variables, but it might be desirable the probe the actual device to answer this question. Pass the pointer to the mmc struct to that function, so implementations can make use of that. Compile-tested for all users changed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ley Foon Tan <ley.foon.tan@inte.com> (for SoCFPGA) Acked-by: Lokesh Vutla <lokeshvutla@ti.com> (for OMAP and K3) Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-12 10:06:49 +00:00
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
{
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
return gd->arch.omap_boot_mode;
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
}
ARM: SPL: Make spl_mmc.c more generic Move the default omap/related-centric board_mmc_init to arch/arm/cpu/armv7/omap-common/boot-common.c and move the type defines to <asm/spl.h>. Also use mmc->read_bl_len rather than MMCSD_SECTOR_SIZE Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 17:25:15 +00:00
arm: mach-omap2: load/start remoteproc IPU1/IPU2 First check the presence of the ipu firmware in the boot partition. If present enable the ipu and the related clocks & then move on to load the firmware and eventually start remoteproc IPU1/IPU2. do_enable_clocks by default puts the clock domains into auto which does not work well with reset. Hence adding do_enable_ipu_clocks function. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix IPU1_LOAD_ADDR and compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:52 +00:00
int load_firmware(char *name_fw, u32 *loadaddr)
{
struct udevice *fsdev;
int size = 0;
if (!IS_ENABLED(CONFIG_FS_LOADER))
return 0;
if (!*loadaddr)
return 0;
if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) {
size = request_firmware_into_buf(fsdev, name_fw,
(void *)*loadaddr, 0, 0);
}
return size;
}
void spl_boot_ipu(void)
{
int ret, size;
u32 loadaddr = IPU1_LOAD_ADDR;
if (!IS_ENABLED(CONFIG_SPL_BUILD) ||
!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
return;
size = load_firmware("dra7-ipu1-fw.xem4", &loadaddr);
if (size <= 0) {
pr_err("Firmware loading failed\n");
goto skip_ipu1;
}
enable_ipu1_clocks();
ret = rproc_dev_init(0);
if (ret) {
debug("%s: IPU1 failed to initialize on rproc (%d)\n",
__func__, ret);
goto skip_ipu1;
}
ret = rproc_load(0, IPU1_LOAD_ADDR, 0x2000000);
if (ret) {
debug("%s: IPU1 failed to load on rproc (%d)\n", __func__,
ret);
goto skip_ipu1;
}
debug("Starting IPU1...\n");
ret = rproc_start(0);
if (ret)
debug("%s: IPU1 failed to start (%d)\n", __func__, ret);
skip_ipu1:
loadaddr = IPU2_LOAD_ADDR;
size = load_firmware("dra7-ipu2-fw.xem4", &loadaddr);
if (size <= 0) {
pr_err("Firmware loading failed for ipu2\n");
return;
}
enable_ipu2_clocks();
ret = rproc_dev_init(1);
if (ret) {
debug("%s: IPU2 failed to initialize on rproc (%d)\n", __func__,
ret);
return;
}
ret = rproc_load(1, IPU2_LOAD_ADDR, 0x2000000);
if (ret) {
debug("%s: IPU2 failed to load on rproc (%d)\n", __func__,
ret);
return;
}
debug("Starting IPU2...\n");
ret = rproc_start(1);
if (ret)
debug("%s: IPU2 failed to start (%d)\n", __func__, ret);
}
ARM: SPL: Move gpmc_init() to spl_board_init() This is an OMAP/related-specific function, move calling it to spl_board_init() and turn on CONFIG_SPL_BOARD_INIT on the boards that enabled NAND and didn't enable this already. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 19:26:08 +00:00
void spl_board_init(void)
{
TI ARMv7: Don't use GD before crt0.S has set it Prior to this change we set the gd pointer early so that we can store data in it. This becomes problematic for DM changes as well as being odd in general. Re-work the code paths so that we don't need to set the gd pointer so early and instead can rely upon the normal setting of it. In order to do this we do need to move certain calls from s_init into spl_board_init(), mainly preloader_console_init and save_omap_boot_params. Tested on: Beaglebone Black, AM43xx GP EVM, Beagleboard, Beagleboard xM, OMAP5 uEVM, DRA7xx EVM Signed-off-by: Tom Rini <trini@ti.com> Tested-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2014-12-19 21:53:24 +00:00
/* Prepare console output */
preloader_console_init();
spl: Always define preloader_console_init A large number of boards call preloader_console_init unconditionally. Currently, they fail to build with CONFIG_SPL_SERIAL=n, because the function is undefined in that case. To fix the build, always define preloader_console_init, but make it no-op when CONFIG_SPL_SERIAL=n. For the few boards that did check for CONFIG_SPL_SERIAL before calling preloader_console_init, remove the checks, since the function can now be called unconditionally. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-07 23:08:10 +00:00
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
ARM: SPL: Move gpmc_init() to spl_board_init() This is an OMAP/related-specific function, move calling it to spl_board_init() and turn on CONFIG_SPL_BOARD_INIT on the boards that enabled NAND and didn't enable this already. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 19:26:08 +00:00
gpmc_init();
#endif
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
#if defined(CONFIG_SPL_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespace The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:29 +00:00
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
#endif
Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEW Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:27 +00:00
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW)
am33xx: support for booting via usbeth This patch adds BOOT_DEVICE define for USB booting and fixes spl_board_init function to call arch_misc_init (this is the place there musb is initialized). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2013-02-05 11:36:25 +00:00
arch_misc_init();
#endif
watchdog: omap_wdt: Disable DM watchdog support in SPL This patch disables DM watchdog support for SPL builds and uses the legacy omap watchdog driver on TI AM335x chipsets. The following build error is reported if DM watchdog support was enabled in SPL: CC spl/drivers/usb/gadget/rndis.o LD spl/drivers/usb/gadget/built-in.o LD spl/drivers/usb/musb-new/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 440 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Adjusted WATCHDOG_RESET macro accordingly. Earlier it was pointing to hw_watchdog_reset. Since CONFIG_WATCHDOG replaces CONFIG_HW_WATCHDOG, now WATCHDOG_RESET macro points to watchdog_reset. This watchdog_reset is not defined anywhere for am33xx/omap2 and needs to be defined. Fixed this by simply calling hw_watchdog_reset in watchdog_reset. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx/omap2 based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> [trini: Fix watchdog.h logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-31 16:24:07 +00:00
#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
am335x: Enable CONFIG_OMAP_WATCHDOG support There is a board-specific portion for calling watchdog enable itself, in main U-Boot. Signed-off-by: Tom Rini <trini@ti.com>
2013-10-01 16:32:04 +00:00
hw_watchdog_init();
#endif
am33xx: Add am33xx_spl_board_init function, call We need to allow for a further call-out in spl_board_init. Call this am33xx_spl_board_init and add a __weak version. This function may be used to scale the MPU frequency up, depending on board needs. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-30 20:28:44 +00:00
#ifdef CONFIG_AM33XX
am33xx_spl_board_init();
#endif
arm: mach-omap2: load/start remoteproc IPU1/IPU2 First check the presence of the ipu firmware in the boot partition. If present enable the ipu and the related clocks & then move on to load the firmware and eventually start remoteproc IPU1/IPU2. do_enable_clocks by default puts the clock domains into auto which does not work well with reset. Hence adding do_enable_ipu_clocks function. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix IPU1_LOAD_ADDR and compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-27 12:16:52 +00:00
if (IS_ENABLED(CONFIG_SPL_BUILD) &&
IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
spl_boot_ipu();
ARM: SPL: Move gpmc_init() to spl_board_init() This is an OMAP/related-specific function, move calling it to spl_board_init() and turn on CONFIG_SPL_BOARD_INIT on the boards that enabled NAND and didn't enable this already. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 19:26:08 +00:00
}
ARM: OMAP: Cleanup boot parameters usage The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
2013-04-24 00:41:24 +00:00
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
SPL: make struct spl_image 64-bit safe Since entry_point and load_addr are addresses, they should be represented as longs to cover the whole address space and to avoid warning when compiling the SPL in 64-bit. Also adjust debug prints to add the 'l' specifier, where needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-02 11:48:31 +00:00
debug("image entry point: 0x%lX\n", spl_image->entry_point);
ARM: OMAP: Cleanup boot parameters usage The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
2013-04-24 00:41:24 +00:00
/* Pass the saved boot_params from rom code */
omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-15 14:02:19 +00:00
image_entry((u32 *)boot_params);
ARM: OMAP: Cleanup boot parameters usage The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
2013-04-24 00:41:24 +00:00
}
ARM:AM33XX: Add SPL support for AM335X EVM This patch is added to support SPL feature on AM335X platform. In this patch, MMC1 is configured as boot device for SPL and support for other devices will be added in the next patch series. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-09 20:38:59 +00:00
#endif
arm: omap: reset sata on boot On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA device if it is used by U-Boot. It happens because U-Boot does not reset SATA controller before boot. Reset the controller on OS boot so that Linux will have a clean state to work with. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2014-12-15 14:02:58 +00:00
#ifdef CONFIG_SCSI_AHCI_PLAT
void arch_preboot_os(void)
{
ahci: mmio_base is a virtual address Don't store it in a u32. Don't dereference the bus address as if it were a virtual address (fixes 284231e49a2b4 ("ahci: Support splitting of read transactions into multiple chunks")). Fixes crash on boot in MPC8641HPCN_36BIT target. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Vadim Bendebury <vbendeb@chromium.org> Acked-by: York Sun <yorksun@freescale.com>
2015-04-17 14:19:01 +00:00
ahci_reset((void __iomem *)DWC_AHSATA_BASE);
arm: omap: reset sata on boot On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA device if it is used by U-Boot. It happens because U-Boot does not reset SATA controller before boot. Reset the controller on OS boot so that Linux will have a clean state to work with. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2014-12-15 14:02:58 +00:00
}
#endif
Reference in a new issue Copy permalink