u-boot/board/ge/bx50v3/bx50v3.c

589 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015 Timesys Corporation
* Copyright 2015 General Electric Company
* Copyright 2012 Freescale Semiconductor, Inc.
*/
#include <image.h>
#include <init.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <env.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/libfdt.h>
#include <asm/gpio.h>
imx: reorganize IMX code as other SOCs Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/<SOC>. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Akshay Bhat <akshaybhat@timesys.com> CC: Ken Lin <Ken.Lin@advantech.com.tw> CC: Marek Vasut <marek.vasut@gmail.com> CC: Heiko Schocher <hs@denx.de> CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> CC: Christian Gmeiner <christian.gmeiner@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Patrick Bruenn <p.bruenn@beckhoff.com> CC: Troy Kisky <troy.kisky@boundarydevices.com> CC: Nikita Kiryanov <nikita@compulab.co.il> CC: Otavio Salvador <otavio@ossystems.com.br> CC: "Eric Bénard" <eric@eukrea.com> CC: Jagan Teki <jagan@amarulasolutions.com> CC: Ye Li <ye.li@nxp.com> CC: Peng Fan <peng.fan@nxp.com> CC: Adrian Alonso <adrian.alonso@nxp.com> CC: Alison Wang <b18965@freescale.com> CC: Tim Harvey <tharvey@gateworks.com> CC: Martin Donnelly <martin.donnelly@ge.com> CC: Marcin Niestroj <m.niestroj@grinn-global.com> CC: Lukasz Majewski <lukma@denx.de> CC: Adam Ford <aford173@gmail.com> CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> CC: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Soeren Moch <smoch@web.de> CC: Richard Hu <richard.hu@technexion.com> CC: Wig Cheng <wig.cheng@technexion.com> CC: Vanessa Maegima <vanessa.maegima@nxp.com> CC: Max Krummenacher <max.krummenacher@toradex.com> CC: Stefan Agner <stefan.agner@toradex.com> CC: Markus Niebel <Markus.Niebel@tq-group.com> CC: Breno Lima <breno.lima@nxp.com> CC: Francesco Montefoschi <francesco.montefoschi@udoo.org> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Scott Wood <oss@buserror.net> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Anatolij Gustschin <agust@denx.de> CC: Simon Glass <sjg@chromium.org> CC: "Andrew F. Davis" <afd@ti.com> CC: "Łukasz Majewski" <l.majewski@samsung.com> CC: Patrice Chotard <patrice.chotard@st.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Hans de Goede <hdegoede@redhat.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Stephen Warren <swarren@nvidia.com> CC: Andre Przywara <andre.przywara@arm.com> CC: "Álvaro Fernández Rojas" <noltari@gmail.com> CC: York Sun <york.sun@nxp.com> CC: Xiaoliang Yang <xiaoliang.yang@nxp.com> CC: Chen-Yu Tsai <wens@csie.org> CC: George McCollister <george.mccollister@gmail.com> CC: Sven Ebenfeld <sven.ebenfeld@gmail.com> CC: Filip Brozovic <fbrozovic@gmail.com> CC: Petr Kulhavy <brain@jikos.cz> CC: Eric Nelson <eric@nelint.com> CC: Bai Ping <ping.bai@nxp.com> CC: Anson Huang <Anson.Huang@nxp.com> CC: Sanchayan Maity <maitysanchayan@gmail.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Patrick Delaunay <patrick.delaunay@st.com> CC: Gary Bisson <gary.bisson@boundarydevices.com> CC: Alexander Graf <agraf@suse.de> CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-06-29 08:16:06 +00:00
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/video.h>
#include <mmc.h>
#include <fsl_esdhc_imx.h>
#include <miiphy.h>
#include <net.h>
#include <netdev.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <power/regulator.h>
#include <power/da9063_pmic.h>
#include <input.h>
#include <pwm.h>
#include <version.h>
#include <stdlib.h>
#include <dm/root.h>
#include "../common/ge_common.h"
#include "../common/vpd_reader.h"
#include "../../../drivers/net/e1000.h"
#include <pci.h>
#include <panel.h>
DECLARE_GLOBAL_DATA_PTR;
static int confidx; /* Default to generic. */
static struct vpd_cache vpd;
#define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS)
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST)
#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST)
#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST)
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
static int mx6_rgmii_rework(struct phy_device *phydev)
{
/* Configure AR8033 to ouput a 125MHz clk from CLK_25M */
/* set device address 0x7 */
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
/* offset 0x8016: CLK_25M Clock Select */
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
/* enable register write, no post increment, address 0x7 */
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
/* set to 125 MHz from local PLL source */
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x18);
/* rgmii tx clock delay enable */
/* set debug port address: SerDes Test and System Mode Control */
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
/* enable rgmii tx clock delay */
/* set the reserved bits to avoid board specific voltage peak issue*/
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
return 0;
}
int board_phy_config(struct phy_device *phydev)
{
mx6_rgmii_rework(phydev);
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#if defined(CONFIG_VIDEO_IPUV3)
static void do_enable_backlight(struct display_info_t const *dev)
{
struct udevice *panel;
int ret;
ret = uclass_get_device(UCLASS_PANEL, 0, &panel);
if (ret) {
printf("Could not find panel: %d\n", ret);
return;
}
panel_set_backlight(panel, 100);
panel_enable_backlight(panel);
}
static void do_enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
}
static int is_b850v3(void)
{
return confidx == 3;
}
static int detect_lcd(struct display_info_t const *dev)
{
return !is_b850v3();
}
struct display_info_t const displays[] = {{
.bus = -1,
.addr = -1,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_lcd,
.enable = do_enable_backlight,
.mode = {
.name = "G121X1-L03",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 20,
.right_margin = 300,
.upper_margin = 30,
.lower_margin = 8,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = -1,
.addr = 3,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_hdmi,
.enable = do_enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} } };
size_t display_count = ARRAY_SIZE(displays);
static void enable_videopll(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
s32 timeout = 100000;
setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
/* PLL_VIDEO 455MHz (24MHz * (37+11/12) / 2)
* |
* PLL5
* |
* CS2CDR[LDB_DI0_CLK_SEL]
* |
* +----> LDB_DI0_SERIAL_CLK_ROOT
* |
* +--> CSCMR2[LDB_DI0_IPU_DIV] --> LDB_DI0_IPU 455 / 7 = 65 MHz
*/
clrsetbits_le32(&ccm->analog_pll_video,
BM_ANADIG_PLL_VIDEO_DIV_SELECT |
BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));
writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
while (timeout--)
if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
break;
if (timeout < 0)
printf("Warning: video pll lock timeout!\n");
clrsetbits_le32(&ccm->analog_pll_video,
BM_ANADIG_PLL_VIDEO_BYPASS,
BM_ANADIG_PLL_VIDEO_ENABLE);
}
static void setup_display_b850v3(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
enable_videopll();
/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
imx_setup_hdmi();
/* Set LDB_DI0 as clock source for IPU_DI0 */
clrsetbits_le32(&mxc_ccm->chsccdr,
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
(CHSCCDR_CLK_SEL_LDB_DI0 <<
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
/* Turn on IPU LDB DI0 clocks */
setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
enable_ipu_clock();
writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW |
IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT |
IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
IOMUXC_GPR2_SPLIT_MODE_EN_MASK |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 |
IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0,
&iomux->gpr[2]);
clrbits_le32(&iomux->gpr[3],
IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
IOMUXC_GPR3_LVDS1_MUX_CTL_MASK |
IOMUXC_GPR3_HDMI_MUX_CTL_MASK);
}
static void setup_display_bx50v3(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
enable_videopll();
/* When a reset/reboot is performed the display power needs to be turned
* off for atleast 500ms. The boot time is ~300ms, we need to wait for
* an additional 200ms here. Unfortunately we use external PMIC for
* doing the reset, so can not differentiate between POR vs soft reset
*/
mdelay(200);
/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
/* Set LDB_DI0 as clock source for IPU_DI0 */
clrsetbits_le32(&mxc_ccm->chsccdr,
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
(CHSCCDR_CLK_SEL_LDB_DI0 <<
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
/* Turn on IPU LDB DI0 clocks */
setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
enable_ipu_clock();
writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
&iomux->gpr[2]);
clrsetbits_le32(&iomux->gpr[3],
IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET));
}
#endif /* CONFIG_VIDEO_IPUV3 */
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
#define VPD_TYPE_INVALID 0x00
#define VPD_BLOCK_NETWORK 0x20
#define VPD_BLOCK_HWID 0x44
#define VPD_PRODUCT_B850 1
#define VPD_PRODUCT_B650 2
#define VPD_PRODUCT_B450 3
#define VPD_HAS_MAC1 0x1
#define VPD_HAS_MAC2 0x2
#define VPD_MAC_ADDRESS_LENGTH 6
struct vpd_cache {
bool is_read;
u8 product_id;
u8 has;
unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
unsigned char mac2[VPD_MAC_ADDRESS_LENGTH];
};
/*
* Extracts MAC and product information from the VPD.
*/
static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
size_t size, u8 const *data)
{
if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
size >= 1) {
vpd->product_id = data[0];
} else if (id == VPD_BLOCK_NETWORK && version == 1 &&
type != VPD_TYPE_INVALID) {
if (size >= 6) {
vpd->has |= VPD_HAS_MAC1;
memcpy(vpd->mac1, data, VPD_MAC_ADDRESS_LENGTH);
}
if (size >= 12) {
vpd->has |= VPD_HAS_MAC2;
memcpy(vpd->mac2, data + 6, VPD_MAC_ADDRESS_LENGTH);
}
}
return 0;
}
static void process_vpd(struct vpd_cache *vpd)
{
int fec_index = 0;
int i210_index = -1;
if (!vpd->is_read) {
printf("VPD wasn't read");
return;
}
if (vpd->has & VPD_HAS_MAC1)
eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);
env_set("ethact", "eth0");
switch (vpd->product_id) {
case VPD_PRODUCT_B450:
env_set("confidx", "1");
i210_index = 1;
break;
case VPD_PRODUCT_B650:
env_set("confidx", "2");
i210_index = 1;
break;
case VPD_PRODUCT_B850:
env_set("confidx", "3");
i210_index = 2;
break;
}
if (i210_index >= 0 && (vpd->has & VPD_HAS_MAC2))
eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
}
static iomux_v3_cfg_t const misc_pads[] = {
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NC_PAD_CTRL),
MX6_PAD_EIM_CS0__GPIO2_IO23 | MUX_PAD_CTRL(NC_PAD_CTRL),
MX6_PAD_EIM_CS1__GPIO2_IO24 | MUX_PAD_CTRL(NC_PAD_CTRL),
MX6_PAD_EIM_OE__GPIO2_IO25 | MUX_PAD_CTRL(NC_PAD_CTRL),
MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NC_PAD_CTRL),
MX6_PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NC_PAD_CTRL),
MX6_PAD_GPIO_9__WDOG1_B | MUX_PAD_CTRL(NC_PAD_CTRL),
};
#define SUS_S3_OUT IMX_GPIO_NR(4, 11)
#define WIFI_EN IMX_GPIO_NR(6, 14)
int board_early_init_f(void)
{
imx_iomux_v3_setup_multiple_pads(misc_pads,
ARRAY_SIZE(misc_pads));
#if defined(CONFIG_VIDEO_IPUV3)
/* Set LDB clock to Video PLL */
select_ldb_di_clock_source(MXC_PLL5_CLK);
#endif
return 0;
}
static void set_confidx(const struct vpd_cache* vpd)
{
switch (vpd->product_id) {
case VPD_PRODUCT_B450:
confidx = 1;
break;
case VPD_PRODUCT_B650:
confidx = 2;
break;
case VPD_PRODUCT_B850:
confidx = 3;
break;
}
}
int board_init(void)
{
if (!read_vpd(&vpd, vpd_callback)) {
int ret, rescan;
vpd.is_read = true;
set_confidx(&vpd);
ret = fdtdec_resetup(&rescan);
if (!ret && rescan) {
dm_uninit();
dm_init_and_scan(false);
}
}
gpio_request(SUS_S3_OUT, "sus_s3_out");
gpio_direction_output(SUS_S3_OUT, 1);
gpio_request(WIFI_EN, "wifi_en");
gpio_direction_output(WIFI_EN, 1);
#if defined(CONFIG_VIDEO_IPUV3)
if (is_b850v3())
setup_display_b850v3();
else
setup_display_bx50v3();
#endif
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
return 0;
}
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
{NULL, 0},
};
#endif
void pmic_init(void)
{
struct udevice *reg;
int ret, i;
static const char * const bucks[] = {
"bcore1",
"bcore2",
"bpro",
"bmem",
"bio",
"bperi",
};
for (i = 0; i < ARRAY_SIZE(bucks); i++) {
ret = regulator_get_by_devname(bucks[i], &reg);
if (reg < 0) {
printf("%s(): Unable to get regulator %s: %d\n",
__func__, bucks[i], ret);
continue;
}
regulator_set_mode(reg, DA9063_BUCKMODE_SYNC);
}
}
int board_late_init(void)
{
process_vpd(&vpd);
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
if (is_b850v3())
env_set("videoargs", "video=DP-1:1024x768@60 video=HDMI-A-1:1024x768@60");
else
env_set("videoargs", "video=LVDS-1:1024x768@65");
/* board specific pmic init */
pmic_init();
check_time();
pci_init();
return 0;
}
/*
* Removes the 'eth[0-9]*addr' environment variable with the given index
*
* @param index [in] the index of the eth_device whose variable is to be removed
*/
static void remove_ethaddr_env_var(int index)
{
char env_var_name[9];
sprintf(env_var_name, index == 0 ? "ethaddr" : "eth%daddr", index);
env_set(env_var_name, NULL);
}
int last_stage_init(void)
{
int i;
/*
* Remove first three ethaddr which may have been created by
* function process_vpd().
*/
for (i = 0; i < 3; ++i)
remove_ethaddr_env_var(i);
return 0;
}
int checkboard(void)
{
printf("BOARD: %s\n", CONFIG_BOARD_NAME);
return 0;
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, struct bd_info *bd)
{
char *rtc_status = env_get("rtc_status");
fdt_setprop(blob, 0, "ge,boot-ver", version_string,
strlen(version_string) + 1);
fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
strlen(rtc_status) + 1);
return 0;
}
#endif
int board_fit_config_name_match(const char *name)
{
if (!vpd.is_read)
return strcmp(name, "imx6q-bx50v3");
switch (vpd.product_id) {
case VPD_PRODUCT_B450:
return strcmp(name, "imx6q-b450v3");
case VPD_PRODUCT_B650:
return strcmp(name, "imx6q-b650v3");
case VPD_PRODUCT_B850:
return strcmp(name, "imx6q-b850v3");
default:
return -1;
}
}
int embedded_dtb_select(void)
{
vpd.is_read = false;
return fdtdec_setup();
}