mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
130 lines
2.4 KiB
Text
130 lines
2.4 KiB
Text
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
/*
|
||
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
/dts-v1/;
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/pinctrl/rockchip.h>
|
||
|
#include "rk3588.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "Rockchip RK3588 EVB1 V10 Board";
|
||
|
compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
|
||
|
|
||
|
aliases {
|
||
|
mmc0 = &sdhci;
|
||
|
serial2 = &uart2;
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = "serial2:1500000n8";
|
||
|
};
|
||
|
|
||
|
backlight: backlight {
|
||
|
compatible = "pwm-backlight";
|
||
|
power-supply = <&vcc12v_dcin>;
|
||
|
pwms = <&pwm2 0 25000 0>;
|
||
|
};
|
||
|
|
||
|
vcc12v_dcin: vcc12v-dcin-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vcc12v_dcin";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <12000000>;
|
||
|
regulator-max-microvolt = <12000000>;
|
||
|
};
|
||
|
|
||
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vcc5v0_sys";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
vin-supply = <&vcc12v_dcin>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&gmac0 {
|
||
|
clock_in_out = "output";
|
||
|
phy-handle = <&rgmii_phy>;
|
||
|
phy-mode = "rgmii-rxid";
|
||
|
pinctrl-0 = <&gmac0_miim
|
||
|
&gmac0_tx_bus2
|
||
|
&gmac0_rx_bus2
|
||
|
&gmac0_rgmii_clk
|
||
|
&gmac0_rgmii_bus>;
|
||
|
pinctrl-names = "default";
|
||
|
rx_delay = <0x00>;
|
||
|
tx_delay = <0x43>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c2 {
|
||
|
status = "okay";
|
||
|
|
||
|
hym8563: rtc@51 {
|
||
|
compatible = "haoyu,hym8563";
|
||
|
reg = <0x51>;
|
||
|
#clock-cells = <0>;
|
||
|
clock-output-names = "hym8563";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&hym8563_int>;
|
||
|
interrupt-parent = <&gpio0>;
|
||
|
interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
|
||
|
wakeup-source;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&mdio0 {
|
||
|
rgmii_phy: ethernet-phy@1 {
|
||
|
/* RTL8211F */
|
||
|
compatible = "ethernet-phy-id001c.c916";
|
||
|
reg = <0x1>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&rtl8211f_rst>;
|
||
|
reset-assert-us = <20000>;
|
||
|
reset-deassert-us = <100000>;
|
||
|
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pinctrl {
|
||
|
rtl8211f {
|
||
|
rtl8211f_rst: rtl8211f-rst {
|
||
|
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
|
||
|
};
|
||
|
|
||
|
hym8563 {
|
||
|
hym8563_int: hym8563-int {
|
||
|
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pwm2 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&sdhci {
|
||
|
bus-width = <8>;
|
||
|
no-sdio;
|
||
|
no-sd;
|
||
|
non-removable;
|
||
|
max-frequency = <200000000>;
|
||
|
mmc-hs400-1_8v;
|
||
|
mmc-hs400-enhanced-strobe;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
pinctrl-0 = <&uart2m0_xfer>;
|
||
|
status = "okay";
|
||
|
};
|