u-boot/include/configs/chromebook_link.h

79 lines
1.9 KiB
C
Raw Normal View History

/*
* Copyright (c) 2011 The Chromium OS Authors.
* (C) Copyright 2008
* Graeme Russ, graeme.russ@gmail.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
#define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_NR_DRAM_BANKS 8
#define CONFIG_X86_MRC_ADDR 0xfffa0000
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
#define CONFIG_CACHE_MRC_SIZE_KB 512
#define CONFIG_X86_SERIAL
#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
#define CONFIG_X86_OPTION_ROM_FILE pci8086,0166.bin
#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000
#define CONFIG_PCI_MEM_BUS 0xe0000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_PREF_BUS 0xd0000000
#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
#define CONFIG_PCI_PREF_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x1000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0xefff
#define CONFIG_SYS_EARLY_PCI_INIT
#define CONFIG_PCI_PNP
#define CONFIG_BIOSEMU
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
#define CONFIG_CROS_EC
#define CONFIG_CROS_EC_LPC
#define CONFIG_CMD_CROS_EC
#define CONFIG_ARCH_EARLY_INIT_R
#undef CONFIG_ENV_IS_NOWHERE
#undef CONFIG_ENV_SIZE
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET 0x003f8000
#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
"stdout=vga,serial\0" \
"stderr=vga,serial\0"
#endif /* __CONFIG_H */