Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 00:47:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/spl/spl_mmc.c

519 lines
12 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* Aneesh V <aneesh@ti.com>
*/
#include <common.h>
dm: mmc: Allow driver model to be used for MMC in SPL Enable MMC using driver model in SPL for consistency with U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:51 +00:00
#include <dm.h>
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:05 +00:00
#include <log.h>
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:39:58 +00:00
#include <part.h>
SPL: Move the omap SPL framework to common/spl Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-13 19:03:19 +00:00
#include <spl.h>
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
#include <linux/compiler.h>
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
#include <errno.h>
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
#include <asm/u-boot.h>
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
#include <errno.h>
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
#include <mmc.h>
spl_mmc.c: Detect missing kernel image in RAW MMC Currently, we assume that if we can read from MMC correctly, we have found a valid image. This is not the case as an empty area will read just fine. Add a check for a valid IH_MAGIC. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-28 18:43:01 +00:00
#include <image.h>
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
static int mmc_load_legacy(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
struct mmc *mmc,
treewide: Drop image_header_t typedef This is not needed and we should avoid typedefs. Use the struct instead and rename it to indicate that it really is a legacy struct. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-07 02:26:52 +00:00
ulong sector, struct legacy_img_hdr *header)
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
{
SPL: Add support for specifying offset between header and image Some image types (e.g. kwbimage v1) store the offset to SPL binary and offset to U-Boot proper binary in their headers. To avoid reading SPL binary when loading U-Boot proper, add support for specifying offset in struct spl_image_info, which defines the offset from the beginning of the header and the beginning of the executable data. Initial support is added only for SPI, MMC and SATA code. We can extend it later if needed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:27 +00:00
u32 image_offset_sectors;
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
u32 image_size_sectors;
unsigned long count;
SPL: Add support for specifying offset between header and image Some image types (e.g. kwbimage v1) store the offset to SPL binary and offset to U-Boot proper binary in their headers. To avoid reading SPL binary when loading U-Boot proper, add support for specifying offset in struct spl_image_info, which defines the offset from the beginning of the header and the beginning of the executable data. Initial support is added only for SPI, MMC and SATA code. We can extend it later if needed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:27 +00:00
u32 image_offset;
SPL: Let spl_parse_image_header() return value Allow the spl_parse_image_header() to return value. This is convenient for controlling the SPL boot flow if the loaded image is corrupted. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com>
2016-04-28 22:44:54 +00:00
int ret;
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
ret = spl_parse_image_header(spl_image, bootdev, header);
SPL: Let spl_parse_image_header() return value Allow the spl_parse_image_header() to return value. This is convenient for controlling the SPL boot flow if the loaded image is corrupted. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com>
2016-04-28 22:44:54 +00:00
if (ret)
return ret;
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
SPL: Add support for specifying offset between header and image Some image types (e.g. kwbimage v1) store the offset to SPL binary and offset to U-Boot proper binary in their headers. To avoid reading SPL binary when loading U-Boot proper, add support for specifying offset in struct spl_image_info, which defines the offset from the beginning of the header and the beginning of the executable data. Initial support is added only for SPI, MMC and SATA code. We can extend it later if needed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:27 +00:00
/* convert offset to sectors - round down */
image_offset_sectors = spl_image->offset / mmc->read_bl_len;
/* calculate remaining offset */
image_offset = spl_image->offset % mmc->read_bl_len;
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
/* convert size to sectors - round up */
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
image_size_sectors = (spl_image->size + mmc->read_bl_len - 1) /
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
mmc->read_bl_len;
/* Read the header too to avoid extra memcpy */
SPL: Add support for specifying offset between header and image Some image types (e.g. kwbimage v1) store the offset to SPL binary and offset to U-Boot proper binary in their headers. To avoid reading SPL binary when loading U-Boot proper, add support for specifying offset in struct spl_image_info, which defines the offset from the beginning of the header and the beginning of the executable data. Initial support is added only for SPI, MMC and SATA code. We can extend it later if needed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:27 +00:00
count = blk_dread(mmc_get_blk_desc(mmc),
sector + image_offset_sectors,
image_size_sectors,
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
(void *)(ulong)spl_image->load_addr);
SPL: make struct spl_image 64-bit safe Since entry_point and load_addr are addresses, they should be represented as longs to cover the whole address space and to avoid warning when compiling the SPL in 64-bit. Also adjust debug prints to add the 'l' specifier, where needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-02 11:48:31 +00:00
debug("read %x sectors to %lx\n", image_size_sectors,
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
spl_image->load_addr);
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
if (count != image_size_sectors)
return -EIO;
SPL: Add support for specifying offset between header and image Some image types (e.g. kwbimage v1) store the offset to SPL binary and offset to U-Boot proper binary in their headers. To avoid reading SPL binary when loading U-Boot proper, add support for specifying offset in struct spl_image_info, which defines the offset from the beginning of the header and the beginning of the executable data. Initial support is added only for SPI, MMC and SATA code. We can extend it later if needed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:27 +00:00
if (image_offset)
memmove((void *)(ulong)spl_image->load_addr,
(void *)(ulong)spl_image->load_addr + image_offset,
spl_image->size);
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
return 0;
}
static ulong h_spl_load_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
struct mmc *mmc = load->dev;
dm: mmc: spl: Add support for CONFIG_BLK Allow driver model to be used for block devices in SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-14 20:03:06 +00:00
return blk_dread(mmc_get_blk_desc(mmc), sector, count, buf);
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
}
spl: mmc: support uboot image offset on main partition On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-15 07:08:08 +00:00
static __maybe_unused unsigned long spl_mmc_raw_uboot_offset(int part)
{
#if IS_ENABLED(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR)
if (part == 0)
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET;
#endif
return 0;
}
spl: spl_mmc: add __maybe_unused to mmc_load_image_raw_sector() If there are no CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and CONFIG_SPL_OS_BOOT, there is unused-function build warning. Add __maybe_unused macro to remove the warning. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2017-09-19 04:29:45 +00:00
static __maybe_unused
int mmc_load_image_raw_sector(struct spl_image_info *spl_image,
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
struct spl_boot_device *bootdev,
spl: spl_mmc: add __maybe_unused to mmc_load_image_raw_sector() If there are no CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and CONFIG_SPL_OS_BOOT, there is unused-function build warning. Add __maybe_unused macro to remove the warning. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2017-09-19 04:29:45 +00:00
struct mmc *mmc, unsigned long sector)
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
{
spl: spl_mmc: Error and count distinction This introduces a distinction between return codes that are read bytes counts and errors. Read bytes counts are erroneous when null (no data was read) while errors are erroneous when non-null. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-22 10:45:35 +00:00
unsigned long count;
treewide: Drop image_header_t typedef This is not needed and we should avoid typedefs. Use the struct instead and rename it to indicate that it really is a legacy struct. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-07 02:26:52 +00:00
struct legacy_img_hdr *header;
spl: Weed out CONFIG_SYS_TEXT_BASE usage The SPL loaders assume that the CONFIG_SYS_TEXT_BASE memory location is available and can be corrupted by loading ie. uImage or fitImage headers there. Sometimes it could be beneficial to load the headers elsewhere, ie. if CONFIG_SYS_TEXT_BASE is not yet writable while we still want to parse the image headers in some local onchip memory to ie. extract firmware from that image. Add the possibility to override the location where the headers get loaded by introducing new function, spl_get_load_buffer() which takes two arguments -- offset from the CONFIG_SYS_TEXT_BASE and size of the data that are to be loaded there -- and returns a valid buffer address or hangs the system. The default behavior is the same as before, add the offset to CONFIG_SYS_TEXT_BASE and return that address. User can override the weak spl_get_load_buffer() function though. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-08-14 09:27:02 +00:00
struct blk_desc *bd = mmc_get_blk_desc(mmc);
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
int ret = 0;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
spl: Weed out CONFIG_SYS_TEXT_BASE usage The SPL loaders assume that the CONFIG_SYS_TEXT_BASE memory location is available and can be corrupted by loading ie. uImage or fitImage headers there. Sometimes it could be beneficial to load the headers elsewhere, ie. if CONFIG_SYS_TEXT_BASE is not yet writable while we still want to parse the image headers in some local onchip memory to ie. extract firmware from that image. Add the possibility to override the location where the headers get loaded by introducing new function, spl_get_load_buffer() which takes two arguments -- offset from the CONFIG_SYS_TEXT_BASE and size of the data that are to be loaded there -- and returns a valid buffer address or hangs the system. The default behavior is the same as before, add the offset to CONFIG_SYS_TEXT_BASE and return that address. User can override the weak spl_get_load_buffer() function though. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-08-14 09:27:02 +00:00
header = spl_get_load_buffer(-sizeof(*header), bd->blksz);
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
/* read image header to find the image size & load address */
spl: Weed out CONFIG_SYS_TEXT_BASE usage The SPL loaders assume that the CONFIG_SYS_TEXT_BASE memory location is available and can be corrupted by loading ie. uImage or fitImage headers there. Sometimes it could be beneficial to load the headers elsewhere, ie. if CONFIG_SYS_TEXT_BASE is not yet writable while we still want to parse the image headers in some local onchip memory to ie. extract firmware from that image. Add the possibility to override the location where the headers get loaded by introducing new function, spl_get_load_buffer() which takes two arguments -- offset from the CONFIG_SYS_TEXT_BASE and size of the data that are to be loaded there -- and returns a valid buffer address or hangs the system. The default behavior is the same as before, add the offset to CONFIG_SYS_TEXT_BASE and return that address. User can override the weak spl_get_load_buffer() function though. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-08-14 09:27:02 +00:00
count = blk_dread(bd, sector, 1, header);
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
debug("hdr read sector %lx, count=%lu\n", sector, count);
if (count == 0) {
ret = -EIO;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
goto end;
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
}
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
spl_mmc: allow to load raw image The function spl_parse_image_header() falls back to a raw image if the U-Boot header is missing and CONFIG_SPL_PANIC_ON_RAW_IMAGE is undefined. While, mmc_load_image_raw_sector() only accepts a U-Boot legacy image or an FIT image, preventing us from loading a raw image. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-16 03:10:00 +00:00
if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
image_get_magic(header) == FDT_MAGIC) {
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
struct spl_load_info load;
debug("Found FIT\n");
load.dev = mmc;
load.priv = NULL;
spl: Allow to load a FIT containing U-Boot from FS This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24 05:04:38 +00:00
load.filename = NULL;
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
load.bl_len = mmc->read_bl_len;
load.read = h_spl_load_read;
spl: Update spl_load_simple_fit() to take an spl_image param Upda the SPL FIT code to use the spl_image parameter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:16 +00:00
ret = spl_load_simple_fit(spl_image, &load, sector, header);
spl: mmc: support loading i.MX container format file i.MX8 only support AHAB secure boot with Container format image, we could not use FIT to support secure boot, so introduce container support to let SPL could load container images. Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Cc: York Sun <york.sun@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-22 07:42:38 +00:00
} else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
struct spl_load_info load;
load.dev = mmc;
load.priv = NULL;
load.filename = NULL;
load.bl_len = mmc->read_bl_len;
load.read = h_spl_load_read;
ret = spl_load_imx_container(spl_image, &load, sector);
spl_mmc: allow to load raw image The function spl_parse_image_header() falls back to a raw image if the U-Boot header is missing and CONFIG_SPL_PANIC_ON_RAW_IMAGE is undefined. While, mmc_load_image_raw_sector() only accepts a U-Boot legacy image or an FIT image, preventing us from loading a raw image. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-16 03:10:00 +00:00
} else {
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
ret = mmc_load_legacy(spl_image, bootdev, mmc, sector, header);
spl: Add debugging info for spl_mmc boot Add a few messages to indicate progress and failure. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:47 +00:00
}
spl_mmc.c: Detect missing kernel image in RAW MMC Currently, we assume that if we can read from MMC correctly, we have found a valid image. This is not the case as an empty area will read just fine. Add a check for a valid IH_MAGIC. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-28 18:43:01 +00:00
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
end:
spl: Support loading a FIT from MMC Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:58 +00:00
if (ret) {
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: spl_mmc: Disambiguate error message The error message "spl: mmc block read error" may come from two different functions, so we should better annotate the function name where the error comes from to help debugging. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-21 02:12:04 +00:00
puts("mmc_load_image_raw_sector: mmc block read error\n");
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#endif
spl: spl_mmc: Error and count distinction This introduces a distinction between return codes that are read bytes counts and errors. Read bytes counts are erroneous when null (no data was read) while errors are erroneous when non-null. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-22 10:45:35 +00:00
return -1;
spl: spl_mmc: Minor cosmetics This switches some printf calls to puts and avoids a test repetition. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-03 16:48:51 +00:00
}
spl: spl_mmc: Error and count distinction This introduces a distinction between return codes that are read bytes counts and errors. Read bytes counts are erroneous when null (no data was read) while errors are erroneous when non-null. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-22 10:45:35 +00:00
return 0;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
}
mmc: add static to spl_mmc_get_device_index() This function is only used in common/spl/spl_mmc.c[ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-06-22 07:52:36 +00:00
static int spl_mmc_get_device_index(u32 boot_device)
spl: mmc: add support for BOOT_DEVICE_MMC2 Currently the mmc device that SPL looks at is always mmc0, regardless of the BOOT_DEVICE_MMCx value. This forces some boards to implement hacks in order to boot from other mmc devices. Make SPL take into account the correct mmc device. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:54 +00:00
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
return 0;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
return 1;
}
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: unsupported mmc boot device.\n");
#endif
return -ENODEV;
}
spl: mmc: Rename 'mmc' variable to 'mmcp' The 'p' suffix makes it more obvious that we are dealing with a pointer to a (pointer) value that will be returned to its caller. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Nikita Kiryanov <nikita@compulab.co.il> Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-12-02 17:59:12 +00:00
static int spl_mmc_find_device(struct mmc **mmcp, u32 boot_device)
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
{
spl: mmc: add support for BOOT_DEVICE_MMC2 Currently the mmc device that SPL looks at is always mmc0, regardless of the BOOT_DEVICE_MMCx value. This forces some boards to implement hacks in order to boot from other mmc devices. Make SPL take into account the correct mmc device. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:54 +00:00
int err, mmc_dev;
mmc_dev = spl_mmc_get_device_index(boot_device);
if (mmc_dev < 0)
return mmc_dev;
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
spl: dm_mmc: Initialize only the required mmc device In SPL, all the available mmc devices gets initialized during boot. This might not work in cases where clocks are not available for certain mmc devices(other than boot device) and the support for enabling device might not be ready. Texas Instruments' K3 J721E device having a central system controller (dmsc) is one such example falling in this category. Below is the sequence for the failing scenario: - ROM comes up in SD mode and loads SPL by just initialing SD card. - SPL loads dmsc firmware from SD Card. Since ROM has enabled SD, SPL need not enable the SD, just need to re initialize the card. But SPL is trying to initialize other MMC instances which are in disabled state. Since dmsc firmware is not yet available, devices cannot be enabled. So in SPL, initialize only the mmc device that is needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-09-09 09:10:36 +00:00
#if CONFIG_IS_ENABLED(DM_MMC)
err = mmc_init_device(mmc_dev);
#else
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
err = mmc_initialize(NULL);
spl: dm_mmc: Initialize only the required mmc device In SPL, all the available mmc devices gets initialized during boot. This might not work in cases where clocks are not available for certain mmc devices(other than boot device) and the support for enabling device might not be ready. Texas Instruments' K3 J721E device having a central system controller (dmsc) is one such example falling in this category. Below is the sequence for the failing scenario: - ROM comes up in SD mode and loads SPL by just initialing SD card. - SPL loads dmsc firmware from SD Card. Since ROM has enabled SD, SPL need not enable the SD, just need to re initialize the card. But SPL is trying to initialize other MMC instances which are in disabled state. Since dmsc firmware is not yet available, devices cannot be enabled. So in SPL, initialize only the mmc device that is needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-09-09 09:10:36 +00:00
#endif /* DM_MMC */
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: could not initialize mmc. error: %d\n", err);
#endif
return err;
}
spl: mmc: Unify non/driver model spl_mmc_find_device() It is risky to have two different functions with much the same code. Future authors may update one but not the other. It is hard to see which parts are the same and which are different. Unify the functions and drop the differences that are not really needed. Note that one puts() becomes printf() as Tom mentioned that this does not affect image size: https://patchwork.ozlabs.org/patch/537276/ Note: It would be better to have an empty printf() and avoid the #ifdef for CONFIG_SPL_LIBCOMMON_SUPPORT. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-12-02 17:59:13 +00:00
*mmcp = find_mmc_device(mmc_dev);
err = *mmcp ? 0 : -ENODEV;
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: mmc: Report device number when we fail If we fail to find the MMC boot device, report the number of the one we were looking for in the error to aid diagnosis. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-09-18 08:11:55 +00:00
printf("spl: could not find mmc device %d. error: %d\n",
mmc_dev, err);
spl: mmc: refactor device location code to its own function Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:44 +00:00
#endif
return err;
}
return 0;
}
SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:35 +00:00
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
struct spl_boot_device *bootdev,
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
struct mmc *mmc, int partition,
unsigned long sector)
spl: MMC U-Boot image load from raw partition Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-08 22:14:56 +00:00
{
part: Drop disk_partition_t typedef We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:39:57 +00:00
struct disk_partition info;
spl: spl_mmc: Error and count distinction This introduces a distinction between return codes that are read bytes counts and errors. Read bytes counts are erroneous when null (no data was read) while errors are erroneous when non-null. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-22 10:45:35 +00:00
int err;
spl: MMC U-Boot image load from raw partition Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-08 22:14:56 +00:00
SPL: add support to boot from a partition type the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:34 +00:00
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
int type_part;
/* Only support MBR so DOS_ENTRY_NUMBERS */
for (type_part = 1; type_part <= DOS_ENTRY_NUMBERS; type_part++) {
err = part_get_info(mmc_get_blk_desc(mmc), type_part, &info);
if (err)
continue;
WS cleanup: remove trailing white space Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-27 15:42:38 +00:00
if (info.sys_ind ==
SPL: add support to boot from a partition type the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:34 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE) {
partition = type_part;
break;
}
}
#endif
dm: spl: mmc: Support raw partitions with CONFIG_BLK Fix up the call in mmc_load_image_raw_partition() to use the correct function to obtain the MMC device, so that this code can support driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 23:10:18 +00:00
err = part_get_info(mmc_get_blk_desc(mmc), partition, &info);
spl: spl_mmc: Error and count distinction This introduces a distinction between return codes that are read bytes counts and errors. Read bytes counts are erroneous when null (no data was read) while errors are erroneous when non-null. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-22 10:45:35 +00:00
if (err) {
spl: MMC U-Boot image load from raw partition Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-08 22:14:56 +00:00
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: spl_mmc: Minor cosmetics This switches some printf calls to puts and avoids a test repetition. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-03 16:48:51 +00:00
puts("spl: partition error\n");
spl: MMC U-Boot image load from raw partition Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-08 22:14:56 +00:00
#endif
return -1;
}
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
return mmc_load_image_raw_sector(spl_image, bootdev, mmc, info.start + sector);
spl: spl_mmc: Add option to boot from a MMC partition with offset This patch introduces the option to boot from a MMC card parition with an offset. This can be done by using both defines together: define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((160 << 10) / 512) The example above loads the main U-Boot at offset 160KiB from the MMC partition 1. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Tom Rini <trini@konsulko.com>
2015-07-20 09:20:39 +00:00
#else
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
return mmc_load_image_raw_sector(spl_image, bootdev, mmc, info.start);
spl: spl_mmc: Add option to boot from a MMC partition with offset This patch introduces the option to boot from a MMC card parition with an offset. This can be done by using both defines together: define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((160 << 10) / 512) The example above loads the main U-Boot at offset 160KiB from the MMC partition 1. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Tom Rini <trini@konsulko.com>
2015-07-20 09:20:39 +00:00
#endif
spl: MMC U-Boot image load from raw partition Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-08 22:14:56 +00:00
}
#endif
spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-30 16:39:59 +00:00
#if CONFIG_IS_ENABLED(FALCON_BOOT_MMCSD)
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
static int mmc_load_image_raw_os(struct spl_image_info *spl_image,
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
struct spl_boot_device *bootdev,
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
struct mmc *mmc)
spl_mmc: add Falcon mode support for raw variant If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from sector CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS of kernel argument parameters starting from sector CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-05-13 08:36:29 +00:00
{
spl: mmc: raw: Try to load u-boot if Linux image is not found If CONFIG_SPL_OS_BOOT is enabled and Linux image is not flashed at RAW_MODE_KERNEL_SECTOR in MMC, spl still assumes that Linux is available and tries to boot it and hangs. In order to avoid this, adding a check to verify if parsed image header is of type IH_OS_LINUX. If it fails then fall back to load u-boot image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-04-11 09:54:50 +00:00
int ret;
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
spl: mmc: Fix check of CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR When Falcon Mode is enabled, SPL needs to check the value of CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Unfortunately, it was using the CONFIG_VAL(SYS_MMCSD_RAW_MODE_ARGS_SECTOR) which converts it into CONFIG_SPL_SYS_MMCSD_RAW_MODE_ARGS_SECTOR when CONFIG_SPL_BUILD is enabled. CONFIG_SPL_SYS_MMCSD_RAW_MODE_ARGS_SECTOR does not exist in common/spl/Kconfig. Replaced with defined(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR). Signed-off-by: Elena Popa <elena.popa@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-08 13:42:15 +00:00
#if defined(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)
spl: mmc: Skip RAW mode ARGS sectors if not defined RAW mode ARGS sector doesn't have to be used for all falcon boot. Skip loading ARGS sectors if not defined. Signed-off-by: York Sun <york.sun@nxp.com>
2018-06-26 16:44:39 +00:00
unsigned long count;
dm: spl: mmc: Support CONFIG_BLK in SPL MMC Update the method of accessing the block device so that it works with CONFIG_BLK enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:32 +00:00
count = blk_dread(mmc_get_blk_desc(mmc),
spl: spl_mmc: Error and count distinction This introduces a distinction between return codes that are read bytes counts and errors. Read bytes counts are erroneous when null (no data was read) while errors are erroneous when non-null. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-22 10:45:35 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS,
(void *) CONFIG_SYS_SPL_ARGS_ADDR);
spl: spl_mmc.c Correct blk_dread() return value check The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 01:01:30 +00:00
if (count != CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS) {
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: spl_mmc: Disambiguate error message The error message "spl: mmc block read error" may come from two different functions, so we should better annotate the function name where the error comes from to help debugging. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-21 02:12:04 +00:00
puts("mmc_load_image_raw_os: mmc block read error\n");
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#endif
spl_mmc: add Falcon mode support for raw variant If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from sector CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS of kernel argument parameters starting from sector CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-05-13 08:36:29 +00:00
return -1;
}
spl: mmc: Skip RAW mode ARGS sectors if not defined RAW mode ARGS sector doesn't have to be used for all falcon boot. Skip loading ARGS sectors if not defined. Signed-off-by: York Sun <york.sun@nxp.com>
2018-06-26 16:44:39 +00:00
#endif /* CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR */
spl_mmc: add Falcon mode support for raw variant If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from sector CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS of kernel argument parameters starting from sector CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-05-13 08:36:29 +00:00
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
ret = mmc_load_image_raw_sector(spl_image, bootdev, mmc,
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR);
spl: mmc: raw: Try to load u-boot if Linux image is not found If CONFIG_SPL_OS_BOOT is enabled and Linux image is not flashed at RAW_MODE_KERNEL_SECTOR in MMC, spl still assumes that Linux is available and tries to boot it and hangs. In order to avoid this, adding a check to verify if parsed image header is of type IH_OS_LINUX. If it fails then fall back to load u-boot image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-04-11 09:54:50 +00:00
if (ret)
return ret;
spl: mmc: Support OP-TEE payloads in Falcon mode In general, Falcon mode means we're booting a linux kernel directly. With FIT images, however, an OP-TEE secure kernel can be booted before linux. Thus, if the next stage is an IH_OS_TEE, this isn't necessarily a problem. Of course, a general solution would involve mmc_load_image_raw_os() only loading the binary, and leaving the decision of suitability to someone else. However, a rework of the boot flow is beyond the scope of this patch. Accept IH_OS_TEE as a valid OS value. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-15 19:19:23 +00:00
if (spl_image->os != IH_OS_LINUX && spl_image->os != IH_OS_TEE) {
global: Use proper project name U-Boot Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-05-17 07:17:16 +00:00
puts("Expected image is not found. Trying to start U-Boot\n");
spl: mmc: raw: Try to load u-boot if Linux image is not found If CONFIG_SPL_OS_BOOT is enabled and Linux image is not flashed at RAW_MODE_KERNEL_SECTOR in MMC, spl still assumes that Linux is available and tries to boot it and hangs. In order to avoid this, adding a check to verify if parsed image header is of type IH_OS_LINUX. If it fails then fall back to load u-boot image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-04-11 09:54:50 +00:00
return -ENOENT;
}
return 0;
spl_mmc: add Falcon mode support for raw variant If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from sector CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS of kernel argument parameters starting from sector CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-05-13 08:36:29 +00:00
}
spl: mmc: remove #ifdef CONFIG_SPL_OS_BOOT check Implement default versions of falcon mode functions to make the CONFIG_SPL_OS_BOOT check in spl_mmc_load_image() unnecessary, thus reducing its #ifdef complexity. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Suriyan Ramasami <suriyan.r@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:45 +00:00
#else
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
static int mmc_load_image_raw_os(struct spl_image_info *spl_image,
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
struct spl_boot_device *bootdev,
spl: Pass spl_image as a parameter to load_image() methods Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:13 +00:00
struct mmc *mmc)
spl: mmc: remove #ifdef CONFIG_SPL_OS_BOOT check Implement default versions of falcon mode functions to make the CONFIG_SPL_OS_BOOT check in spl_mmc_load_image() unnecessary, thus reducing its #ifdef complexity. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Suriyan Ramasami <suriyan.r@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:45 +00:00
{
return -ENOSYS;
}
spl_mmc: add Falcon mode support for raw variant If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from sector CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS of kernel argument parameters starting from sector CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-05-13 08:36:29 +00:00
#endif
spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-30 16:39:59 +00:00
#ifndef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
return 1;
}
#endif
spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION On some platforms is SYS_MMCSD_FS_BOOT_PARTITION unsupported. So allow to completely disable MMC FS Boot support via new option SYS_MMCSD_FS_BOOT. By default MMC FS Boot support is enabled (like it was before) except for ARCH_MVEBU where MMC FS Boot supported is unsupported due to Marvell BootROM limitations. Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-21 14:13:08 +00:00
#ifdef CONFIG_SYS_MMCSD_FS_BOOT
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
struct mmc *mmc,
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
const char *filename)
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
{
int err = -ENOSYS;
spl: allow boot from first bootable partition This was implemented in order to get dual-slot bootloader partitions on the BeagleBone Black, whose MLO boots from the first bootable partition: MLO chainloads u-boot in the same way. Signed-off-by: Jérôme Carretero <cJ-uboot@zougloub.eu> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-03-15 20:34:51 +00:00
__maybe_unused int partition = CONFIG_SYS_MMCSD_FS_BOOT_PARTITION;
#if CONFIG_SYS_MMCSD_FS_BOOT_PARTITION == -1
{
struct disk_partition info;
debug("Checking for the first MBR bootable partition\n");
for (int type_part = 1; type_part <= DOS_ENTRY_NUMBERS; type_part++) {
err = part_get_info(mmc_get_blk_desc(mmc), type_part, &info);
if (err)
continue;
debug("Partition %d is of type %d and bootable=%d\n", type_part, info.sys_ind, info.bootable);
if (info.bootable != 0) {
debug("Partition %d is bootable, using it\n", type_part);
partition = type_part;
break;
}
}
printf("Using first bootable partition: %d\n", partition);
if (partition == CONFIG_SYS_MMCSD_FS_BOOT_PARTITION) {
return -ENOSYS;
}
}
#endif
spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:03 +00:00
#ifdef CONFIG_SPL_FS_FAT
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
if (!spl_start_uboot()) {
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = spl_load_image_fat_os(spl_image, bootdev, mmc_get_blk_desc(mmc),
spl: allow boot from first bootable partition This was implemented in order to get dual-slot bootloader partitions on the BeagleBone Black, whose MLO boots from the first bootable partition: MLO chainloads u-boot in the same way. Signed-off-by: Jérôme Carretero <cJ-uboot@zougloub.eu> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-03-15 20:34:51 +00:00
partition);
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
if (!err)
return err;
}
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = spl_load_image_fat(spl_image, bootdev, mmc_get_blk_desc(mmc),
spl: allow boot from first bootable partition This was implemented in order to get dual-slot bootloader partitions on the BeagleBone Black, whose MLO boots from the first bootable partition: MLO chainloads u-boot in the same way. Signed-off-by: Jérôme Carretero <cJ-uboot@zougloub.eu> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-03-15 20:34:51 +00:00
partition,
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
filename);
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
if (!err)
return err;
#endif
#endif
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4 Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:05 +00:00
#ifdef CONFIG_SPL_FS_EXT4
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
if (!spl_start_uboot()) {
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = spl_load_image_ext_os(spl_image, bootdev, mmc_get_blk_desc(mmc),
spl: allow boot from first bootable partition This was implemented in order to get dual-slot bootloader partitions on the BeagleBone Black, whose MLO boots from the first bootable partition: MLO chainloads u-boot in the same way. Signed-off-by: Jérôme Carretero <cJ-uboot@zougloub.eu> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-03-15 20:34:51 +00:00
partition);
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
if (!err)
return err;
}
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = spl_load_image_ext(spl_image, bootdev, mmc_get_blk_desc(mmc),
spl: allow boot from first bootable partition This was implemented in order to get dual-slot bootloader partitions on the BeagleBone Black, whose MLO boots from the first bootable partition: MLO chainloads u-boot in the same way. Signed-off-by: Jérôme Carretero <cJ-uboot@zougloub.eu> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-03-15 20:34:51 +00:00
partition,
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
filename);
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
if (!err)
return err;
#endif
#endif
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4 Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:05 +00:00
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
err = -ENOENT;
#endif
return err;
}
#endif
spl: mmc: extend spl_mmc_boot_mode() to take mmc argument Platforms can overwrite the weak definition of spl_mmc_boot_mode() to determine where to load U-Boot proper from. For most of them this is a trivial decision based on Kconfig variables, but it might be desirable the probe the actual device to answer this question. Pass the pointer to the mmc struct to that function, so implementations can make use of that. Compile-tested for all users changed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ley Foon Tan <ley.foon.tan@inte.com> (for SoCFPGA) Acked-by: Lokesh Vutla <lokeshvutla@ti.com> (for OMAP and K3) Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-12 10:06:49 +00:00
u32 __weak spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
spl: eMMC/SD: Provide one __weak spl_boot_mode() function The goal of this patch is to clean up the code related to choosing SPL MMC boot mode. The spl_boot_mode() now is called only in spl_mmc_load_image() function, which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled. To achieve the goal, all per mach/arch implementations eligible for unification has been replaced with one __weak implementation. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP) Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-03 07:29:52 +00:00
{
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4 Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:05 +00:00
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
spl: eMMC/SD: Provide one __weak spl_boot_mode() function The goal of this patch is to clean up the code related to choosing SPL MMC boot mode. The spl_boot_mode() now is called only in spl_mmc_load_image() function, which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled. To achieve the goal, all per mach/arch implementations eligible for unification has been replaced with one __weak implementation. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP) Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-03 07:29:52 +00:00
return MMCSD_MODE_FS;
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
return MMCSD_MODE_EMMCBOOT;
#else
return MMCSD_MODE_RAW;
#endif
}
spl: spl_mmc: provide one weak function spl_boot_partition The spl_boot_partition function has been added in order to have the possibility to boot on a same binary from different mmc devices with different partitions. By default keep the current behavior, SPL use the partition defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-20 09:54:51 +00:00
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
spl: mmc: Rename spl_boot_partition() to spl_mmc_boot_partition() This function is only relevant to the MMC driver so calling it spl_boot_partition() might be confusing. Rename it to spl_mmc_boot_partition() to make its purpose more clear (and bring it in line with spl_mmc_boot_mode()). Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-15 09:33:31 +00:00
int __weak spl_mmc_boot_partition(const u32 boot_device)
spl: spl_mmc: provide one weak function spl_boot_partition The spl_boot_partition function has been added in order to have the possibility to boot on a same binary from different mmc devices with different partitions. By default keep the current behavior, SPL use the partition defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-20 09:54:51 +00:00
{
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION;
}
#endif
spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementation The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-26 08:14:35 +00:00
unsigned long __weak spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
unsigned long raw_sect)
spl: mmc: introduce spl_mmc_get_uboot_raw_sector Introduce a weak function spl_mmc_get_uboot_raw_sector, then platform could have their own implementation. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Michal Simek <michal.simek@xilinx.com>
2019-09-23 02:18:40 +00:00
{
spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementation The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-26 08:14:35 +00:00
return raw_sect;
spl: mmc: introduce spl_mmc_get_uboot_raw_sector Introduce a weak function spl_mmc_get_uboot_raw_sector, then platform could have their own implementation. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Michal Simek <michal.simek@xilinx.com>
2019-09-23 02:18:40 +00:00
}
spl: mmc: Factor out eMMC boot partition selection code Factor out eMMC boot partition selection code into default_spl_mmc_emmc_boot_partition() function and implement weak spl_mmc_emmc_boot_partition(), so that architecture or board code can override the eMMC boot partition selection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Harald Seiler <hws@denx.de> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-03 02:55:32 +00:00
int default_spl_mmc_emmc_boot_partition(struct mmc *mmc)
{
int part;
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
#else
/*
* We need to check what the partition is configured to.
* 1 and 2 match up to boot0 / boot1 and 7 is user data
* which is the first physical partition (0).
*/
mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot part Mask macro PART_ACCESS_MASK filter out access bits of emmc register and macro EXT_CSD_EXTRACT_BOOT_PART() extracts boot part bits of emmc register. So use EXT_CSD_EXTRACT_BOOT_PART() when extracting boot partition. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-11 10:44:27 +00:00
part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
spl: mmc: Factor out eMMC boot partition selection code Factor out eMMC boot partition selection code into default_spl_mmc_emmc_boot_partition() function and implement weak spl_mmc_emmc_boot_partition(), so that architecture or board code can override the eMMC boot partition selection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Harald Seiler <hws@denx.de> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-03 02:55:32 +00:00
if (part == 7)
part = 0;
#endif
return part;
}
int __weak spl_mmc_emmc_boot_partition(struct mmc *mmc)
{
return default_spl_mmc_emmc_boot_partition(mmc);
}
spl: mmc: Use correct MMC device when loading image When attempting to load images from multiple MMC devices in sequence, spl_mmc_load() chooses the wrong device from the second attempt onwards. The reason is that MMC initialization is only done on its first call and spl_mmc_load() will then continue using this same device for all future calls. Fix this by checking the devnum of the "cached" device struct against the one which is requested. If they match, use the cached one but if they do not match, initialize the new device. This fixes specifying multiple MMC devices in the SPL's boot order to fall back when U-Boot Proper is corrupted or missing on the first attempted MMC device. Fixes: e1eb6ada4e38 ("spl: Make image loader infrastructure more universal") Signed-off-by: Harald Seiler <hws@denx.de>
2022-07-11 12:35:32 +00:00
static int spl_mmc_get_mmc_devnum(struct mmc *mmc)
{
struct blk_desc *block_dev;
#if !CONFIG_IS_ENABLED(BLK)
block_dev = &mmc->block_dev;
#else
block_dev = dev_get_uclass_plat(mmc->dev);
#endif
return block_dev->devnum;
}
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
int spl_mmc_load(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
const char *filename,
int raw_part,
unsigned long raw_sect)
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
{
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
static struct mmc *mmc;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
u32 boot_mode;
dm: mmc: Allow driver model to be used for MMC in SPL Enable MMC using driver model in SPL for consistency with U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:51 +00:00
int err = 0;
spl: mmc: support uboot image offset on main partition On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-15 07:08:08 +00:00
__maybe_unused int part = 0;
spl: mmc: Use correct MMC device when loading image When attempting to load images from multiple MMC devices in sequence, spl_mmc_load() chooses the wrong device from the second attempt onwards. The reason is that MMC initialization is only done on its first call and spl_mmc_load() will then continue using this same device for all future calls. Fix this by checking the devnum of the "cached" device struct against the one which is requested. If they match, use the cached one but if they do not match, initialize the new device. This fixes specifying multiple MMC devices in the SPL's boot order to fall back when U-Boot Proper is corrupted or missing on the first attempted MMC device. Fixes: e1eb6ada4e38 ("spl: Make image loader infrastructure more universal") Signed-off-by: Harald Seiler <hws@denx.de>
2022-07-11 12:35:32 +00:00
int mmc_dev;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
spl: mmc: Use correct MMC device when loading image When attempting to load images from multiple MMC devices in sequence, spl_mmc_load() chooses the wrong device from the second attempt onwards. The reason is that MMC initialization is only done on its first call and spl_mmc_load() will then continue using this same device for all future calls. Fix this by checking the devnum of the "cached" device struct against the one which is requested. If they match, use the cached one but if they do not match, initialize the new device. This fixes specifying multiple MMC devices in the SPL's boot order to fall back when U-Boot Proper is corrupted or missing on the first attempted MMC device. Fixes: e1eb6ada4e38 ("spl: Make image loader infrastructure more universal") Signed-off-by: Harald Seiler <hws@denx.de>
2022-07-11 12:35:32 +00:00
/* Perform peripheral init only once for an mmc device */
mmc_dev = spl_mmc_get_device_index(bootdev->boot_device);
if (!mmc || spl_mmc_get_mmc_devnum(mmc) != mmc_dev) {
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
err = spl_mmc_find_device(&mmc, bootdev->boot_device);
if (err)
return err;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
err = mmc_init(mmc);
if (err) {
mmc = NULL;
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
printf("spl: mmc init failed with error: %d\n", err);
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#endif
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
return err;
}
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
}
spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging So we can instead fallback to doing something else on errors. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-05-13 08:36:25 +00:00
spl: mmc: extend spl_mmc_boot_mode() to take mmc argument Platforms can overwrite the weak definition of spl_mmc_boot_mode() to determine where to load U-Boot proper from. For most of them this is a trivial decision based on Kconfig variables, but it might be desirable the probe the actual device to answer this question. Pass the pointer to the mmc struct to that function, so implementations can make use of that. Compile-tested for all users changed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ley Foon Tan <ley.foon.tan@inte.com> (for SoCFPGA) Acked-by: Lokesh Vutla <lokeshvutla@ti.com> (for OMAP and K3) Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-12 10:06:49 +00:00
boot_mode = spl_mmc_boot_mode(mmc, bootdev->boot_device);
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
err = -EINVAL;
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
switch (boot_mode) {
spl: mmc: get rid of emmc boot code duplication Get rid of emmc boot code duplication in spl_mmc_load_image() using a switch case fallthrough into MMCSD_MODE_RAW. Since the #ifdef CONFIG_SUPPORT_EMMC_BOOT check is not really necessary, remove it in the process. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:48 +00:00
case MMCSD_MODE_EMMCBOOT:
spl: mmc: Factor out eMMC boot partition selection code Factor out eMMC boot partition selection code into default_spl_mmc_emmc_boot_partition() function and implement weak spl_mmc_emmc_boot_partition(), so that architecture or board code can override the eMMC boot partition selection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Harald Seiler <hws@denx.de> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-03 02:55:32 +00:00
part = spl_mmc_emmc_boot_partition(mmc);
spl: mmc: Fix indentation in spl_mmc.c file This fixes a wrongly indented block of code. Signed-off-by: Mans Rullgard <mans@mansr.com> [lukma: Make the commit message more verbose] Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-03 14:17:17 +00:00
if (CONFIG_IS_ENABLED(MMC_TINY))
err = mmc_switch_part(mmc, part);
else
err = blk_dselect_hwpart(mmc_get_blk_desc(mmc), part);
if (err) {
spl: mmc: get rid of emmc boot code duplication Get rid of emmc boot code duplication in spl_mmc_load_image() using a switch case fallthrough into MMCSD_MODE_RAW. Since the #ifdef CONFIG_SUPPORT_EMMC_BOOT check is not really necessary, remove it in the process. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:48 +00:00
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: mmc: Fix indentation in spl_mmc.c file This fixes a wrongly indented block of code. Signed-off-by: Mans Rullgard <mans@mansr.com> [lukma: Make the commit message more verbose] Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-03 14:17:17 +00:00
puts("spl: mmc partition switch failed\n");
spl: mmc: get rid of emmc boot code duplication Get rid of emmc boot code duplication in spl_mmc_load_image() using a switch case fallthrough into MMCSD_MODE_RAW. Since the #ifdef CONFIG_SUPPORT_EMMC_BOOT check is not really necessary, remove it in the process. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:48 +00:00
#endif
spl: mmc: Fix indentation in spl_mmc.c file This fixes a wrongly indented block of code. Signed-off-by: Mans Rullgard <mans@mansr.com> [lukma: Make the commit message more verbose] Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-03 14:17:17 +00:00
return err;
}
/* Fall through */
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
case MMCSD_MODE_RAW:
debug("spl: mmc boot mode: raw\n");
if (!spl_start_uboot()) {
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = mmc_load_image_raw_os(spl_image, bootdev, mmc);
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
if (!err)
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
return err;
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
}
spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition On i.MX8, when booting from eMMC boot partition, the whole flash.bin is stored in boot partition, however SPL switches to user partition during the init of mmc driver: spl_mmc_load() -> mmc_init() Then it tries to load the container image in spl_mmc_get_uboot_raw_sector(), but here it reads the data from user partition and the header is not recognized as a valid header. So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch to address this issue. Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch is not correct, so let's move it after eMMC partition switch. Reported-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-23 01:43:30 +00:00
spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementation The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-26 08:14:35 +00:00
raw_sect = spl_mmc_get_uboot_raw_sector(mmc, raw_sect);
spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition On i.MX8, when booting from eMMC boot partition, the whole flash.bin is stored in boot partition, however SPL switches to user partition during the init of mmc driver: spl_mmc_load() -> mmc_init() Then it tries to load the container image in spl_mmc_get_uboot_raw_sector(), but here it reads the data from user partition and the header is not recognized as a valid header. So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch to address this issue. Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch is not correct, so let's move it after eMMC partition switch. Reported-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-23 01:43:30 +00:00
SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:35 +00:00
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = mmc_load_image_raw_partition(spl_image, bootdev,
mmc, raw_part,
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
raw_sect);
spl: spl_mmc: MMC boot mode provisions checks This allows using only one of either raw or fs mode for SPL mmc boot, without the need to have provisions for the other. In particular, a device may have U-Boot installed on a file system on the mmc, without ever needing to read U-Boot from raw memory. Thus, there is no reason to provide a sector or partition for raw mode. This allows this behaviour and still provides a robust fallback mechanism in case provisions for both modes are defined. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-08 21:05:09 +00:00
if (!err)
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
return err;
SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:35 +00:00
#endif
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = mmc_load_image_raw_sector(spl_image, bootdev, mmc,
spl: mmc: support uboot image offset on main partition On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-15 07:08:08 +00:00
raw_sect + spl_mmc_raw_uboot_offset(part));
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
if (!err)
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
return err;
spl: spl_mmc: MMC boot mode provisions checks This allows using only one of either raw or fs mode for SPL mmc boot, without the need to have provisions for the other. In particular, a device may have U-Boot installed on a file system on the mmc, without ever needing to read U-Boot from raw memory. Thus, there is no reason to provide a sector or partition for raw mode. This allows this behaviour and still provides a robust fallback mechanism in case provisions for both modes are defined. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-08 21:05:09 +00:00
#endif
spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS Since commit fd61d39970b9901217efc7536d9f3a61b4e1752a: spl: mmc: add break statements in spl_mmc_load_image() RAW and FS boot modes are now exclusive again. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to try MMCSD_MODE_FS then. It has been tested on a beaglebone black to boot on an EXT partition. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2016-02-18 17:17:36 +00:00
/* If RAW mode fails, try FS mode. */
spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION On some platforms is SYS_MMCSD_FS_BOOT_PARTITION unsupported. So allow to completely disable MMC FS Boot support via new option SYS_MMCSD_FS_BOOT. By default MMC FS Boot support is enabled (like it was before) except for ARCH_MVEBU where MMC FS Boot supported is unsupported due to Marvell BootROM limitations. Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-21 14:13:08 +00:00
#ifdef CONFIG_SYS_MMCSD_FS_BOOT
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
case MMCSD_MODE_FS:
debug("spl: mmc boot mode: fs\n");
SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Add parameter spl_boot_device to spl_parse_board_header(), which allows the implementations to see from which device we are booting and do boot-device-specific checks of the image header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 13:31:38 +00:00
err = spl_mmc_do_fs_boot(spl_image, bootdev, mmc, filename);
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
if (!err)
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
return err;
spl: mmc: move fs boot into its own function Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:47 +00:00
spl: mmc: add break statements in spl_mmc_load_image() The original intention of the mmc load_image() function was to try multiple boot modes before failing. This is evident by the lack of break statements in the switch, and the following line in the default case: puts("spl: mmc: no boot mode left to try\n"); This implementation is problematic because: - The availability of alternative boot modes is very arbitrary since it depends on the specific order of the switch cases. If your boot mode happens to be the first case, then you'll have a bunch of other boot modes as alternatives. If it happens to be the last case, then you have none. - Opting in/out is tied to config options, so the only way for you to prevent an alternative boot mode from being attempted is to give up on the feature completely. - This implementation makes the code more complicated and difficult to understand. Address these issues by inserting a break statements between the cases to make the function try only one boot mode. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:43 +00:00
break;
spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION On some platforms is SYS_MMCSD_FS_BOOT_PARTITION unsupported. So allow to completely disable MMC FS Boot support via new option SYS_MMCSD_FS_BOOT. By default MMC FS Boot support is enabled (like it was before) except for ARCH_MVEBU where MMC FS Boot supported is unsupported due to Marvell BootROM limitations. Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-21 14:13:08 +00:00
#endif
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
spl: mmc: add break statements in spl_mmc_load_image() The original intention of the mmc load_image() function was to try multiple boot modes before failing. This is evident by the lack of break statements in the switch, and the following line in the default case: puts("spl: mmc: no boot mode left to try\n"); This implementation is problematic because: - The availability of alternative boot modes is very arbitrary since it depends on the specific order of the switch cases. If your boot mode happens to be the first case, then you'll have a bunch of other boot modes as alternatives. If it happens to be the last case, then you have none. - Opting in/out is tied to config options, so the only way for you to prevent an alternative boot mode from being attempted is to give up on the feature completely. - This implementation makes the code more complicated and difficult to understand. Address these issues by inserting a break statements between the cases to make the function try only one boot mode. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:43 +00:00
default:
puts("spl: mmc: wrong boot mode\n");
spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-04 15:12:24 +00:00
#endif
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-27 08:20:22 +00:00
}
spl: mmc: add break statements in spl_mmc_load_image() The original intention of the mmc load_image() function was to try multiple boot modes before failing. This is evident by the lack of break statements in the switch, and the following line in the default case: puts("spl: mmc: no boot mode left to try\n"); This implementation is problematic because: - The availability of alternative boot modes is very arbitrary since it depends on the specific order of the switch cases. If your boot mode happens to be the first case, then you'll have a bunch of other boot modes as alternatives. If it happens to be the last case, then you have none. - Opting in/out is tied to config options, so the only way for you to prevent an alternative boot mode from being attempted is to give up on the feature completely. - This implementation makes the code more complicated and difficult to understand. Address these issues by inserting a break statements between the cases to make the function try only one boot mode. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-08 15:11:43 +00:00
spl: change return values of spl_*_load_image() Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-08 15:11:49 +00:00
return err;
omap-common: reorganize spl.c split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems with missing defines if a board does not use mmc or nand. This includes adding spl_ prefix to some functions which are now public. spl_image_t is now a public type. Added some of the common functions to omap-common.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-14 19:33:34 +00:00
}
spl: Convert spl_mmc_load_image() to use linker list Add a linker list declaration for this method and remove the explicit switch() code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:00 +00:00
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
int spl_mmc_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
return spl_mmc_load(spl_image, bootdev,
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME,
#else
NULL,
#endif
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
spl: mmc: Rename spl_boot_partition() to spl_mmc_boot_partition() This function is only relevant to the MMC driver so calling it spl_boot_partition() might be confusing. Rename it to spl_mmc_boot_partition() to make its purpose more clear (and bring it in line with spl_mmc_boot_mode()). Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-15 09:33:31 +00:00
spl_mmc_boot_partition(bootdev->boot_device),
spl: Make image loader infrastructure more universal The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-04 22:55:46 +00:00
#else
0,
#endif
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#else
0);
#endif
}
spl: Add a name to the SPL load-image methods It is useful to name each method so that we can print out this name when using the method. Currently this happens using a separate function. In preparation for unifying this, add a name to each method. The name is only available if we have libcommon support (i.e can use printf()). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-30 22:30:50 +00:00
SPL_LOAD_IMAGE_METHOD("MMC1", 0, BOOT_DEVICE_MMC1, spl_mmc_load_image);
SPL_LOAD_IMAGE_METHOD("MMC2", 0, BOOT_DEVICE_MMC2, spl_mmc_load_image);
SPL_LOAD_IMAGE_METHOD("MMC2_2", 0, BOOT_DEVICE_MMC2_2, spl_mmc_load_image);
Reference in a new issue Copy permalink