u-boot/include/configs/dfi-bt700.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <configs/x86-common.h>

#define CONFIG_SYS_MONITOR_LEN		(1 << 20)

#ifndef CONFIG_INTERNAL_UART
/* Use BayTrail internal HS UART which is memory-mapped */
#undef  CONFIG_SYS_NS16550_PORT_MAPPED
#endif

#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \
					"stdout=serial\0" \
					"stderr=serial\0"

#define VIDEO_IO_OFFSET				0
#define CONFIG_X86EMU_RAW_IO

#define CONFIG_ENV_SECT_SIZE		0x1000
#define CONFIG_ENV_OFFSET		0x006ef000

#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND	\
	"load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;"	\
	"load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \
	"run boot"

#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS				\
	"kernel-ver=4.4.0-24\0"					\
	"boot=zboot 03000000 0 04000000 ${filesize}\0"		\
	"upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;"	\
		"sf probe;sf update 100000 0 800000;saveenv\0"

#define CONFIG_PREBOOT

#endif	/* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
x86: Add DFI BT700 BayTrail board support This patch adds support for the DFI BayTrail BT700 QSeven SoM installed on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton NCT6102D Super IO chip providing the UART as console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 2016-08-15 11:50:49 +00:00			`/*`
			`* Copyright (C) 2016 Stefan Roese <sr@denx.de>`
			`*/`

			`/*`
			`* board/config.h - configuration options, board specific`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`#include <configs/x86-common.h>`

			`#define CONFIG_SYS_MONITOR_LEN (1 << 20)`

			`#ifndef CONFIG_INTERNAL_UART`
			`/* Use BayTrail internal HS UART which is memory-mapped */`
			`#undef CONFIG_SYS_NS16550_PORT_MAPPED`
			`#endif`

			`#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \`
			`"stdout=serial\0" \`
			`"stderr=serial\0"`

			`#define VIDEO_IO_OFFSET 0`
			`#define CONFIG_X86EMU_RAW_IO`

			`#define CONFIG_ENV_SECT_SIZE 0x1000`
			`#define CONFIG_ENV_OFFSET 0x006ef000`

			`#undef CONFIG_BOOTCOMMAND`
			`#define CONFIG_BOOTCOMMAND \`
			`"load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \`
			`"load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \`
			`"run boot"`

			`#undef CONFIG_EXTRA_ENV_SETTINGS`
			`#define CONFIG_EXTRA_ENV_SETTINGS \`
			`"kernel-ver=4.4.0-24\0" \`
			`"boot=zboot 03000000 0 04000000 ${filesize}\0" \`
			`"upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \`
			`"sf probe;sf update 100000 0 800000;saveenv\0"`

			`#define CONFIG_PREBOOT`

			`#endif /* __CONFIG_H */`