mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
x86: Add DFI BT700 BayTrail board support
This patch adds support for the DFI BayTrail BT700 QSeven SoM installed on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton NCT6102D Super IO chip providing the UART as console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This commit is contained in:
Stefan Roese
Bin Meng
parent
303dfc2e5e
commit
b1ad6c6966
14 changed files with 611 additions and 0 deletions
|
|
@ -17,6 +17,9 @@ config VENDOR_CONGATEC
|
|||
config VENDOR_COREBOOT
|
||||
bool "coreboot"
|
||||
|
||||
config VENDOR_DFI
|
||||
bool "dfi"
|
||||
|
||||
config VENDOR_EFI
|
||||
bool "efi"
|
||||
|
||||
|
|
@ -35,6 +38,7 @@ endchoice
|
|||
source "board/advantech/Kconfig"
|
||||
source "board/congatec/Kconfig"
|
||||
source "board/coreboot/Kconfig"
|
||||
source "board/dfi/Kconfig"
|
||||
source "board/efi/Kconfig"
|
||||
source "board/emulation/Kconfig"
|
||||
source "board/google/Kconfig"
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@ dtb-y += bayleybay.dtb \
|
|||
conga-qeval20-qa3-e3845.dtb \
|
||||
cougarcanyon2.dtb \
|
||||
crownbay.dtb \
|
||||
dfi-bt700-q7x-151.dtb \
|
||||
efi.dtb \
|
||||
galileo.dtb \
|
||||
minnowmax.dtb \
|
||||
|
|
|
|||
22
arch/x86/dts/dfi-bt700-q7x-151.dts
Normal file
22
arch/x86/dts/dfi-bt700-q7x-151.dts
Normal file
|
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "dfi-bt700.dtsi"
|
||||
|
||||
#include "serial.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DFI-BT700";
|
||||
compatible = "dfi,bt700", "intel,baytrail";
|
||||
|
||||
aliases {
|
||||
serial0 = &serial;
|
||||
spi0 = &spi;
|
||||
};
|
||||
};
|
||||
308
arch/x86/dts/dfi-bt700.dtsi
Normal file
308
arch/x86/dts/dfi-bt700.dtsi
Normal file
|
|
@ -0,0 +1,308 @@
|
|||
/*
|
||||
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/x86-gpio.h>
|
||||
#include <dt-bindings/interrupt-router/intel-irq.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
#include "rtc.dtsi"
|
||||
#include "tsc_timer.dtsi"
|
||||
|
||||
/ {
|
||||
config {
|
||||
silent_console = <0>;
|
||||
};
|
||||
|
||||
pch_pinctrl {
|
||||
compatible = "intel,x86-pinctrl";
|
||||
reg = <0 0>;
|
||||
|
||||
/* Add UART1 PAD configuration (SIO HS-UART) */
|
||||
uart1_txd@0 {
|
||||
pad-offset = <0x10>;
|
||||
mode-func = <1>;
|
||||
};
|
||||
|
||||
uart1_rxd@0 {
|
||||
pad-offset = <0x20>;
|
||||
mode-func = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* As of today, the latest version FSP (gold4) for BayTrail
|
||||
* misses the PAD configuration of the SD controller's Card
|
||||
* Detect signal. The default PAD value for the CD pin sets
|
||||
* the pin to work in GPIO mode, which causes card detect
|
||||
* status cannot be reflected by the Present State register
|
||||
* in the SD controller (bit 16 & bit 18 are always zero).
|
||||
*
|
||||
* Configure this pin to function 1 (SD controller).
|
||||
*/
|
||||
sdmmc3_cd@0 {
|
||||
pad-offset = <0x3a0>;
|
||||
mode-func = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "/serial";
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,baytrail-cpu";
|
||||
reg = <0>;
|
||||
intel,apic-id = <0>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,baytrail-cpu";
|
||||
reg = <1>;
|
||||
intel,apic-id = <2>;
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,baytrail-cpu";
|
||||
reg = <2>;
|
||||
intel,apic-id = <4>;
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,baytrail-cpu";
|
||||
reg = <3>;
|
||||
intel,apic-id = <6>;
|
||||
};
|
||||
};
|
||||
|
||||
pci {
|
||||
compatible = "intel,pci-baytrail", "pci-x86";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
u-boot,dm-pre-reloc;
|
||||
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
|
||||
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
|
||||
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
|
||||
|
||||
pciuart0: uart@1e,3 {
|
||||
compatible = "pci8086,0f0a.00",
|
||||
"pci8086,0f0a",
|
||||
"pciclass,070002",
|
||||
"pciclass,0700",
|
||||
"ns16550";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x0200f310 0x0 0x0 0x0 0x0>;
|
||||
reg-shift = <2>;
|
||||
clock-frequency = <58982400>;
|
||||
current-speed = <115200>;
|
||||
};
|
||||
|
||||
pch@1f,0 {
|
||||
reg = <0x0000f800 0 0 0 0>;
|
||||
compatible = "pci8086,0f1c", "intel,pch9";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
irq-router {
|
||||
compatible = "intel,irq-router";
|
||||
intel,pirq-config = "ibase";
|
||||
intel,ibase-offset = <0x50>;
|
||||
intel,actl-addr = <0>;
|
||||
intel,pirq-link = <8 8>;
|
||||
intel,pirq-mask = <0xdee0>;
|
||||
intel,pirq-routing = <
|
||||
/* BayTrail PCI devices */
|
||||
PCI_BDF(0, 2, 0) INTA PIRQA
|
||||
PCI_BDF(0, 3, 0) INTA PIRQA
|
||||
PCI_BDF(0, 16, 0) INTA PIRQA
|
||||
PCI_BDF(0, 17, 0) INTA PIRQA
|
||||
PCI_BDF(0, 18, 0) INTA PIRQA
|
||||
PCI_BDF(0, 19, 0) INTA PIRQA
|
||||
PCI_BDF(0, 20, 0) INTA PIRQA
|
||||
PCI_BDF(0, 21, 0) INTA PIRQA
|
||||
PCI_BDF(0, 22, 0) INTA PIRQA
|
||||
PCI_BDF(0, 23, 0) INTA PIRQA
|
||||
PCI_BDF(0, 24, 0) INTA PIRQA
|
||||
PCI_BDF(0, 24, 1) INTC PIRQC
|
||||
PCI_BDF(0, 24, 2) INTD PIRQD
|
||||
PCI_BDF(0, 24, 3) INTB PIRQB
|
||||
PCI_BDF(0, 24, 4) INTA PIRQA
|
||||
PCI_BDF(0, 24, 5) INTC PIRQC
|
||||
PCI_BDF(0, 24, 6) INTD PIRQD
|
||||
PCI_BDF(0, 24, 7) INTB PIRQB
|
||||
PCI_BDF(0, 26, 0) INTA PIRQA
|
||||
PCI_BDF(0, 27, 0) INTA PIRQA
|
||||
PCI_BDF(0, 28, 0) INTA PIRQA
|
||||
PCI_BDF(0, 28, 1) INTB PIRQB
|
||||
PCI_BDF(0, 28, 2) INTC PIRQC
|
||||
PCI_BDF(0, 28, 3) INTD PIRQD
|
||||
PCI_BDF(0, 29, 0) INTA PIRQA
|
||||
PCI_BDF(0, 30, 0) INTA PIRQA
|
||||
PCI_BDF(0, 30, 1) INTD PIRQD
|
||||
PCI_BDF(0, 30, 2) INTB PIRQB
|
||||
PCI_BDF(0, 30, 3) INTC PIRQC
|
||||
PCI_BDF(0, 30, 4) INTD PIRQD
|
||||
PCI_BDF(0, 30, 5) INTB PIRQB
|
||||
PCI_BDF(0, 31, 3) INTB PIRQB
|
||||
|
||||
/*
|
||||
* PCIe root ports downstream
|
||||
* interrupts
|
||||
*/
|
||||
PCI_BDF(1, 0, 0) INTA PIRQA
|
||||
PCI_BDF(1, 0, 0) INTB PIRQB
|
||||
PCI_BDF(1, 0, 0) INTC PIRQC
|
||||
PCI_BDF(1, 0, 0) INTD PIRQD
|
||||
PCI_BDF(2, 0, 0) INTA PIRQB
|
||||
PCI_BDF(2, 0, 0) INTB PIRQC
|
||||
PCI_BDF(2, 0, 0) INTC PIRQD
|
||||
PCI_BDF(2, 0, 0) INTD PIRQA
|
||||
PCI_BDF(3, 0, 0) INTA PIRQC
|
||||
PCI_BDF(3, 0, 0) INTB PIRQD
|
||||
PCI_BDF(3, 0, 0) INTC PIRQA
|
||||
PCI_BDF(3, 0, 0) INTD PIRQB
|
||||
PCI_BDF(4, 0, 0) INTA PIRQD
|
||||
PCI_BDF(4, 0, 0) INTB PIRQA
|
||||
PCI_BDF(4, 0, 0) INTC PIRQB
|
||||
PCI_BDF(4, 0, 0) INTD PIRQC
|
||||
>;
|
||||
};
|
||||
|
||||
spi: spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "intel,ich9-spi";
|
||||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
compatible = "stmicro,n25q064a",
|
||||
"spi-flash";
|
||||
memory-map = <0xff800000 0x00800000>;
|
||||
rw-mrc-cache {
|
||||
label = "rw-mrc-cache";
|
||||
reg = <0x006f0000 0x00010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpioa {
|
||||
compatible = "intel,ich6-gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0 0x20>;
|
||||
bank-name = "A";
|
||||
};
|
||||
|
||||
gpiob {
|
||||
compatible = "intel,ich6-gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x20 0x20>;
|
||||
bank-name = "B";
|
||||
};
|
||||
|
||||
gpioc {
|
||||
compatible = "intel,ich6-gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x40 0x20>;
|
||||
bank-name = "C";
|
||||
};
|
||||
|
||||
gpiod {
|
||||
compatible = "intel,ich6-gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x60 0x20>;
|
||||
bank-name = "D";
|
||||
};
|
||||
|
||||
gpioe {
|
||||
compatible = "intel,ich6-gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x80 0x20>;
|
||||
bank-name = "E";
|
||||
};
|
||||
|
||||
gpiof {
|
||||
compatible = "intel,ich6-gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0xA0 0x20>;
|
||||
bank-name = "F";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
fsp {
|
||||
compatible = "intel,baytrail-fsp";
|
||||
fsp,mrc-init-tseg-size = <0>;
|
||||
fsp,mrc-init-mmio-size = <0x800>;
|
||||
fsp,mrc-init-spd-addr1 = <0xa0>;
|
||||
fsp,mrc-init-spd-addr2 = <0xa2>;
|
||||
fsp,emmc-boot-mode = <1>;
|
||||
fsp,enable-sdio;
|
||||
fsp,enable-sdcard;
|
||||
fsp,enable-hsuart0;
|
||||
fsp,enable-hsuart1;
|
||||
fsp,enable-spi;
|
||||
fsp,enable-sata;
|
||||
fsp,sata-mode = <1>;
|
||||
fsp,enable-lpe;
|
||||
fsp,lpss-sio-enable-pci-mode;
|
||||
fsp,enable-dma0;
|
||||
fsp,enable-dma1;
|
||||
fsp,enable-i2c0;
|
||||
fsp,enable-i2c1;
|
||||
fsp,enable-i2c2;
|
||||
fsp,enable-i2c3;
|
||||
fsp,enable-i2c4;
|
||||
fsp,enable-i2c5;
|
||||
fsp,enable-i2c6;
|
||||
fsp,enable-pwm0;
|
||||
fsp,enable-pwm1;
|
||||
fsp,igd-dvmt50-pre-alloc = <2>;
|
||||
fsp,aperture-size = <2>;
|
||||
fsp,gtt-size = <2>;
|
||||
fsp,scc-enable-pci-mode;
|
||||
fsp,os-selection = <4>;
|
||||
fsp,emmc45-ddr50-enabled;
|
||||
fsp,emmc45-retune-timer-value = <8>;
|
||||
fsp,enable-igd;
|
||||
fsp,enable-memory-down;
|
||||
fsp,memory-down-params {
|
||||
compatible = "intel,baytrail-fsp-mdp";
|
||||
fsp,dram-speed = <2>; /* 2=1333MHz */
|
||||
fsp,dram-type = <1>; /* 1=DDR3L */
|
||||
fsp,dimm-0-enable;
|
||||
fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
|
||||
fsp,dimm-density = <3>; /* 3=8Gbit */
|
||||
fsp,dimm-bus-width = <3>; /* 3=64bits */
|
||||
fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
|
||||
|
||||
/* These following values might need a re-visit */
|
||||
fsp,dimm-tcl = <8>;
|
||||
fsp,dimm-trpt-rcd = <8>;
|
||||
fsp,dimm-twr = <8>;
|
||||
fsp,dimm-twtr = <4>;
|
||||
fsp,dimm-trrd = <6>;
|
||||
fsp,dimm-trtp = <4>;
|
||||
fsp,dimm-tfaw = <22>;
|
||||
};
|
||||
};
|
||||
|
||||
microcode {
|
||||
update@0 {
|
||||
#include "microcode/m0130673325.dtsi"
|
||||
};
|
||||
update@1 {
|
||||
#include "microcode/m0130679907.dtsi"
|
||||
};
|
||||
};
|
||||
};
|
||||
29
board/dfi/Kconfig
Normal file
29
board/dfi/Kconfig
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
#
|
||||
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
if VENDOR_DFI
|
||||
|
||||
choice
|
||||
prompt "Mainboard model"
|
||||
optional
|
||||
|
||||
config TARGET_DFI_BT700
|
||||
bool "DFI BT700 BayTrail"
|
||||
help
|
||||
This is the DFI Q7X-151 baseboard equipped with the
|
||||
DFI BayTrail Bt700 SoM. It contains an Atom E3845 with
|
||||
Ethernet (in non-PCIe-x4 configuration), micro-SD, USB 2,
|
||||
USB 3, SATA, serial console and DisplayPort video out.
|
||||
It requires some binary blobs - see README.x86 for details.
|
||||
|
||||
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
|
||||
by U-Boot matches that value.
|
||||
|
||||
endchoice
|
||||
|
||||
source "board/dfi/dfi-bt700/Kconfig"
|
||||
|
||||
endif
|
||||
28
board/dfi/dfi-bt700/Kconfig
Normal file
28
board/dfi/dfi-bt700/Kconfig
Normal file
|
|
@ -0,0 +1,28 @@
|
|||
if TARGET_DFI_BT700
|
||||
|
||||
config SYS_BOARD
|
||||
default "dfi-bt700"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "dfi"
|
||||
|
||||
config SYS_SOC
|
||||
default "baytrail"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "dfi-bt700"
|
||||
|
||||
config SYS_TEXT_BASE
|
||||
default 0xfff00000 if !EFI_STUB
|
||||
default 0x01110000 if EFI_STUB
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||
def_bool y
|
||||
select X86_RESET_VECTOR if !EFI_STUB
|
||||
select INTEL_BAYTRAIL
|
||||
select BOARD_ROMSIZE_KB_8192
|
||||
|
||||
config PCIE_ECAM_BASE
|
||||
default 0xe0000000
|
||||
|
||||
endif
|
||||
8
board/dfi/dfi-bt700/MAINTAINERS
Normal file
8
board/dfi/dfi-bt700/MAINTAINERS
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
congatec DFI-BT700
|
||||
M: Stefan Roese <sr@denx.de>
|
||||
S: Maintained
|
||||
F: board/dfi/dfi-bt700
|
||||
F: include/configs/dfi-bt700.h
|
||||
F: configs/dfi-bt700-q7x-151_defconfig
|
||||
F: arch/x86/dts/dfi-bt700.dtsi
|
||||
F: arch/x86/dts/dfi-bt700-q7x-151.dts
|
||||
8
board/dfi/dfi-bt700/Makefile
Normal file
8
board/dfi/dfi-bt700/Makefile
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
#
|
||||
# Copyright (C) 2015, Google, Inc
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += dfi-bt700.o start.o
|
||||
obj-$(CONFIG_GENERATE_ACPI_TABLE) += dsdt.o
|
||||
13
board/dfi/dfi-bt700/acpi/mainboard.asl
Normal file
13
board/dfi/dfi-bt700/acpi/mainboard.asl
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
/*
|
||||
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/* Power Button */
|
||||
Device (PWRB)
|
||||
{
|
||||
Name(_HID, EISAID("PNP0C0C"))
|
||||
}
|
||||
|
||||
/* TODO: Need add Nuvoton SuperIO chipset NCT6102D ASL codes */
|
||||
30
board/dfi/dfi-bt700/dfi-bt700.c
Normal file
30
board/dfi/dfi-bt700/dfi-bt700.c
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <nuvoton_nct6102d.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/ibmpc.h>
|
||||
#include <asm/pnp_def.h>
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
#ifdef CONFIG_INTERNAL_UART
|
||||
/* Disable the legacy UART which is enabled per default */
|
||||
nct6102d_uarta_disable();
|
||||
#else
|
||||
/*
|
||||
* The FSP enables the BayTrail internal legacy UART (again).
|
||||
* Disable it again, so that the Nuvoton one can be used.
|
||||
*/
|
||||
setup_internal_uart(0);
|
||||
#endif
|
||||
|
||||
/* Disable the watchdog which is enabled per default */
|
||||
nct6102d_wdt_disable();
|
||||
|
||||
return 0;
|
||||
}
|
||||
14
board/dfi/dfi-bt700/dsdt.asl
Normal file
14
board/dfi/dfi-bt700/dsdt.asl
Normal file
|
|
@ -0,0 +1,14 @@
|
|||
/*
|
||||
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
DefinitionBlock("dsdt.aml", "DSDT", 2, "U-BOOT", "U-BOOTBL", 0x00010000)
|
||||
{
|
||||
/* platform specific */
|
||||
#include <asm/arch/acpi/platform.asl>
|
||||
|
||||
/* board specific */
|
||||
#include "acpi/mainboard.asl"
|
||||
}
|
||||
9
board/dfi/dfi-bt700/start.S
Normal file
9
board/dfi/dfi-bt700/start.S
Normal file
|
|
@ -0,0 +1,9 @@
|
|||
/*
|
||||
* Copyright (C) 2015, Google, Inc
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
.globl early_board_init
|
||||
early_board_init:
|
||||
jmp early_board_init_ret
|
||||
63
configs/dfi-bt700-q7x-151_defconfig
Normal file
63
configs/dfi-bt700-q7x-151_defconfig
Normal file
|
|
@ -0,0 +1,63 @@
|
|||
CONFIG_X86=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_VENDOR_DFI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="dfi-bt700-q7x-151"
|
||||
CONFIG_TARGET_DFI_BT700=y
|
||||
CONFIG_HAVE_INTEL_ME=y
|
||||
CONFIG_ENABLE_MRC_CACHE=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_HAVE_VGA_BIOS=y
|
||||
CONFIG_GENERATE_PIRQ_TABLE=y
|
||||
CONFIG_GENERATE_MP_TABLE=y
|
||||
CONFIG_GENERATE_ACPI_TABLE=y
|
||||
CONFIG_SEABIOS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_BOOTSTAGE=y
|
||||
CONFIG_BOOTSTAGE_REPORT=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_CMD_CPU=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_DHCP=y
|
||||
# CONFIG_CMD_NFS is not set
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_BOOTSTAGE=y
|
||||
CONFIG_CMD_EXT2=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_CPU=y
|
||||
CONFIG_NUVOTON_NCT6102D=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_GIGADEVICE=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_E1000=y
|
||||
CONFIG_DM_PCI=y
|
||||
CONFIG_DM_RTC=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_DEBUG_UART_BASE=0x3f8
|
||||
CONFIG_DEBUG_UART_CLOCK=1843200
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_ICH_SPI=y
|
||||
CONFIG_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_VIDEO_VESA=y
|
||||
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
|
||||
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
|
||||
CONFIG_USE_PRIVATE_LIBGCC=y
|
||||
74
include/configs/dfi-bt700.h
Normal file
74
include/configs/dfi-bt700.h
Normal file
|
|
@ -0,0 +1,74 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <configs/x86-common.h>
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
|
||||
#ifndef CONFIG_INTERNAL_UART
|
||||
/* Use BayTrail internal HS UART which is memory-mapped */
|
||||
#undef CONFIG_SYS_NS16550_PORT_MAPPED
|
||||
#endif
|
||||
|
||||
#define CONFIG_PCI_PNP
|
||||
|
||||
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
|
||||
"stdout=serial\0" \
|
||||
"stderr=serial\0"
|
||||
|
||||
#define CONFIG_SCSI_DEV_LIST \
|
||||
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
|
||||
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
|
||||
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_SDHCI
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_MMC_SDMA
|
||||
|
||||
#undef CONFIG_USB_MAX_CONTROLLER_COUNT
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
|
||||
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_USB_ETHER_SMSC95XX
|
||||
#define CONFIG_USB_ETHER_MCS7830
|
||||
#define CONFIG_USB_ETHER_RTL8152
|
||||
|
||||
#define VIDEO_IO_OFFSET 0
|
||||
#define CONFIG_X86EMU_RAW_IO
|
||||
#define CONFIG_CMD_BMP
|
||||
|
||||
#define CONFIG_ENV_SECT_SIZE 0x1000
|
||||
#define CONFIG_ENV_OFFSET 0x006ef000
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_BOOTARGS \
|
||||
"root=/dev/sda1 ro quiet"
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \
|
||||
"load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \
|
||||
"run boot"
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"kernel-ver=4.4.0-24\0" \
|
||||
"boot=zboot 03000000 0 04000000 ${filesize}\0" \
|
||||
"upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \
|
||||
"sf probe;sf update 100000 0 800000;saveenv\0"
|
||||
|
||||
#define CONFIG_PREBOOT
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in a new issue