Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/seaboard.h

119 lines
3.1 KiB
C
Raw Normal View History

arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
tegra: Enable LP0 on Seaboard This enables LP0 to support suspend / resume on Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-04-02 13:19:03 +00:00
/* LP0 suspend / resume */
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#define CONFIG_TEGRA_LP0
tegra: Enable LP0 on Seaboard This enables LP0 to support suspend / resume on Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-04-02 13:19:03 +00:00
#define CONFIG_AES
#define CONFIG_TEGRA_PMU
#define CONFIG_TPS6586X_POWER
#define CONFIG_TEGRA_CLOCK_SCALING
tegra20: rename tegra2 -> tegra20 This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:00 +00:00
#include "tegra20-common.h"
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
tegra: fdt: Enable FDT support for Seaboard This switches Seaboard over to use FDT for run-time config instead of CONFIG options. USB is the only user at present. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-02-27 10:52:53 +00:00
/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
tegra20: rename tegra2 -> tegra20 This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:00 +00:00
#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard
tegra: fdt: Enable FDT support for Seaboard This switches Seaboard over to use FDT for run-time config instead of CONFIG options. USB is the only user at present. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-02-27 10:52:53 +00:00
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
/* High-level configuration options */
tegra20: rename tegra2 -> tegra20 This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:00 +00:00
#define V_PROMPT "Tegra20 (SeaBoard) # "
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard"
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
/* Board-specific serial config */
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#define CONFIG_TEGRA_ENABLE_UARTD
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
tegra2: config: Enable SPI flash on Seaboard The Seaboard includes a Winbond 4MB flash part. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-11-05 04:46:47 +00:00
/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
#define CONFIG_UART_DISABLE_GPIO GPIO_PI3
arm: Tegra2: Change mach-type to MACH_TYPE_SEABOARD due to mach-types.h update Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-02-23 09:54:31 +00:00
#define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
arm: Tegra2: add support for A9 CPU init Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-04-14 12:18:06 +00:00
#define CONFIG_BOARD_EARLY_INIT_F
tegra: Enable display/lcd support on Seaboard Enable the Seaboard's 16-bit LCD and use it as the console. Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-17 13:25:00 +00:00
#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */
mmc: Tegra2: Enable SD/MMC driver for Seaboard and Harmony Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Andy Fleming <afleming@freescale.com>
2011-05-31 10:30:38 +00:00
tegra: i2c: Enable I2C on Seaboard This enables I2C on Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-02-03 15:14:00 +00:00
/* I2C */
#define CONFIG_TEGRA_I2C
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 4
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
mmc: Tegra2: Enable SD/MMC driver for Seaboard and Harmony Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Andy Fleming <afleming@freescale.com>
2011-05-31 10:30:38 +00:00
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.* In anticipation of Tegra3 support, continue removing/renaming Tegra2-specific files. No functional changes (yet). Updated copyrights to 2012. Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-22 11:44:48 +00:00
#define CONFIG_TEGRA_MMC
mmc: Tegra2: Enable SD/MMC driver for Seaboard and Harmony Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Andy Fleming <afleming@freescale.com>
2011-05-31 10:30:38 +00:00
#define CONFIG_CMD_MMC
tegra: seaboard: disable SPI, move environment to eMMC The SPI hardware on Seaboard is too broken to use; it is muxed with the console UART and requires evil interactions between the SPI and UART drivers to work even partially. The current code in U-Boot is not sufficient to make this work correctly; auto boot is aborted due to corruption in the UART RX channel interrupting it. Instead, move the environment to eMMC, at the end of the second boot sector. This should not conflict with any other eMMC usage, irrespective of whether the board boots from SPI, NAND, or eMMC: if U-Boot is stored in eMMC, it will be stored well below this location. The kernel only uses the general area of the eMMC once booted, not the boot sectors. Boards that are derivatives of Seaboard don't have the muxing issue, and should/could have a separate U-Boot configuration file that does enable SPI if desired. Alternatively, the environment could be stored in NAND flash, but we currently have no driver for that controller. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-24 11:38:39 +00:00
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
tegra: put eMMC environment into the boot sectors When I set up Tegra's config files to put the environment into eMMC, I assumed that CONFIG_ENV_OFFSET was a linearized address relative to the start of the eMMC device, and spanning HW partitions boot0, boot1, general* and the user area in order. However, it turns out that the offset is actually relative to the beginning of the user area. Hence, the environment block ended up in a different location to expected and documented. Set CONFIG_SYS_MMC_ENV_PART=2 (boot1) to solve this, and adjust CONFIG_ENV_OFFSET to be relative to the start of boot1, not the entire eMMC. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-30 10:55:45 +00:00
#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
tegra: seaboard: disable SPI, move environment to eMMC The SPI hardware on Seaboard is too broken to use; it is muxed with the console UART and requires evil interactions between the SPI and UART drivers to work even partially. The current code in U-Boot is not sufficient to make this work correctly; auto boot is aborted due to corruption in the UART RX channel interrupting it. Instead, move the environment to eMMC, at the end of the second boot sector. This should not conflict with any other eMMC usage, irrespective of whether the board boots from SPI, NAND, or eMMC: if U-Boot is stored in eMMC, it will be stored well below this location. The kernel only uses the general area of the eMMC once booted, not the boot sectors. Boards that are derivatives of Seaboard don't have the muxing issue, and should/could have a separate U-Boot configuration file that does enable SPI if desired. Alternatively, the environment could be stored in NAND flash, but we currently have no driver for that controller. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-24 11:38:39 +00:00
#define CONFIG_SYS_MMC_ENV_DEV 0
tegra: put eMMC environment into the boot sectors When I set up Tegra's config files to put the environment into eMMC, I assumed that CONFIG_ENV_OFFSET was a linearized address relative to the start of the eMMC device, and spanning HW partitions boot0, boot1, general* and the user area in order. However, it turns out that the offset is actually relative to the beginning of the user area. Hence, the environment block ended up in a different location to expected and documented. Set CONFIG_SYS_MMC_ENV_PART=2 (boot1) to solve this, and adjust CONFIG_ENV_OFFSET to be relative to the start of boot1, not the entire eMMC. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-30 10:55:45 +00:00
#define CONFIG_SYS_MMC_ENV_PART 2
tegra: usb: Enable USB on Seaboard Seaboard has a top port which is USB host or device, and a side port which is host only. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-02-27 10:52:52 +00:00
/* USB Host support */
ARM: tegra: Seaboard: enable multiple USB ports The device tree already contains the required configuration for both the USB1 and USB3 ports. Enable the required configuration options to enable both these ports, which in turn allows the USB1 port to be used. Note that on a true Seaboard, this port is typically used as a device port hosting Tegra's USB recovery protocol. However, on the Springbank derivative, this port is the only external USB port, so we enable it as a host port so that USB peripherals may be used. Enabling this port in U-Boot as a host port doesn't prevent the port from reverting to a device port when the CPU is reset into recovery mode. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-12 09:45:49 +00:00
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
tegra: usb: Enable USB on Seaboard Seaboard has a top port which is USB host or device, and a side port which is host only. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-02-27 10:52:52 +00:00
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
tegra: seaboard: add support for USB networking Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:36:12 +00:00
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
tegra: Enable keyboard for Seaboard This enables the standard keyboard on Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-04-17 09:01:37 +00:00
/* Enable keyboard */
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#define CONFIG_TEGRA_KEYBOARD
tegra: Enable keyboard for Seaboard This enables the standard keyboard on Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-04-17 09:01:37 +00:00
#define CONFIG_KEYBOARD
tegra: Enable USB keyboard Enable USB keyboard for seaboard and ventana Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2012-10-24 08:32:06 +00:00
/* USB keyboard */
#define CONFIG_USB_KEYBOARD
tegra: Enable display/lcd support on Seaboard Enable the Seaboard's 16-bit LCD and use it as the console. Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-17 13:25:00 +00:00
/* LCD support */
#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
#define CONFIG_VIDEO_TEGRA
#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
tegra: Enable NAND on Seaboard This enables NAND support for the Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-29 20:53:30 +00:00
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
/* Max number of NAND devices */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
tegra: config: seaboard: Move tegra-common-post to correct place The NAND defines ended up before this include file, but should be after it, so it doesn't become a post-pre-NAND. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-05 13:21:01 +00:00
#include "tegra-common-post.h"
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
#endif /* __CONFIG_H */
Reference in a new issue Copy permalink