u-boot/include/configs/sun8i.h

/*
 * (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>
 *
 * Configuration settings for the Allwinner A23 (sun8i) CPU
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * A23 specific configuration
 */

#ifdef CONFIG_USB_EHCI_HCD
#define CONFIG_USB_EHCI_SUNXI
#endif

#ifdef CONFIG_MACH_SUN8I_H3
	#define CONFIG_SUNXI_USB_PHYS	4
#elif defined CONFIG_MACH_SUN8I_A83T
	#define CONFIG_SUNXI_USB_PHYS	3
#elif defined CONFIG_MACH_SUN8I_V3S
	#define CONFIG_SUNXI_USB_PHYS	1
#else
	#define CONFIG_SUNXI_USB_PHYS	2
#endif

/*
 * Include common sunxi configuration where most the settings are
 */
#include <configs/sunxi-common.h>

#endif /* __CONFIG_H */
ARM: sunxi: Add basic A23 support The basic blocks of the A23 are similar to the A31 (sun6i). Re-use sun6i code for initial clock, gpio, and uart setup. There is no SPL support for A23, as we do not have any documentation or sample code for DRAM initialization. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-10-22 16:47:44 +08:00			`/*`
			`* (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>`
			`*`
			`* Configuration settings for the Allwinner A23 (sun8i) CPU`
			`*`
			`* SPDX-License-Identifier: GPL-2.0+`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`/*`
			`* A23 specific configuration`
			`*/`
sun8i: Add dram initialization support Based on the register / dram_para headers from the Allwinner u-boot / linux sources + the init sequences from boot0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-12-07 14:34:27 +01:00
Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de> 2017-05-12 22:33:27 -04:00			`#ifdef CONFIG_USB_EHCI_HCD`
sunxi: Move usb-controller init code out of ehci-sunxi.c for reuse for otg Most of the usb-controller init code found in ehci-sunxi.c also is necessary to init the otg usb controller, so move it to a common place. While at it also update various #ifdefs / defines for sun8i support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2015-01-07 15:08:43 +01:00			`#define CONFIG_USB_EHCI_SUNXI`
			`#endif`

sunxi: H3: Add support for the host usb-phys Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-02-09 23:59:33 +01:00			`#ifdef CONFIG_MACH_SUN8I_H3`
			`#define CONFIG_SUNXI_USB_PHYS 4`
sunxi: usb_phy: Add support for A83T USB PHYs The A83T has 3 USB PHYs: 1 for USB OTG, 1 for standard USB 1.1/2.0 host, 1 for USB HSIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-30 00:26:51 +08:00			`#elif defined CONFIG_MACH_SUN8I_A83T`
			`#define CONFIG_SUNXI_USB_PHYS 3`
sunxi: add basic V3s support Basic U-Boot support is now present for V3s. Some memory addresses are changed specially for V3s, as the original address map cannot fit into a so small DRAM. As the DRAM controller code needs a big refactor, the SPL support is disabled in this version. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2017-04-08 15:30:12 +08:00			`#elif defined CONFIG_MACH_SUN8I_V3S`
			`#define CONFIG_SUNXI_USB_PHYS 1`
sunxi: H3: Add support for the host usb-phys Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-02-09 23:59:33 +01:00			`#else`
			`#define CONFIG_SUNXI_USB_PHYS 2`
			`#endif`
sunxi: usb: Do not call phy_probe from hcd code The 2/3 usb-phys on the sunxi SoCs are really a single separate functional block, and are modelled as such in devicetree. So once we've moved all the sunxi usb code to the driver-model then phy_probe will be called once for the entire block from the driver-model enumeration code. Move to this now as this also avoids problems with phy_probe being called multiple times once we introduce ohci support. This also allows us to get rid of the sunxi_usb_phy_enabled_count variable as phy_probe now is guaranteed to be called only once. Since we're effectively rewriting the probe / remove functions, move them to the end of the file while we are at it, as that is the most logical place for them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2015-04-27 16:50:04 +02:00
ARM: sunxi: Add basic A23 support The basic blocks of the A23 are similar to the A31 (sun6i). Re-use sun6i code for initial clock, gpio, and uart setup. There is no SPL support for A23, as we do not have any documentation or sample code for DRAM initialization. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-10-22 16:47:44 +08:00			`/*`
			`* Include common sunxi configuration where most the settings are`
			`*/`
			`#include <configs/sunxi-common.h>`

			`#endif /* __CONFIG_H */`