u-boot/configs/bananapi_m2_zero_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_USE_PREBOOT=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
sunxi: add support for Banana Pi M2 Zero board Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 2018-10-27 05:11:00 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
			`CONFIG_SPL=y`
			`CONFIG_MACH_SUN8I_H3=y`
			`CONFIG_DRAM_CLK=408`
			`CONFIG_MMC0_CD_PIN=""`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org> 2019-07-21 02:51:14 +00:00			`CONFIG_USE_PREBOOT=y`
sunxi: add support for Banana Pi M2 Zero board Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 2018-10-27 05:11:00 +00:00			`# CONFIG_SPL_DOS_PARTITION is not set`
			`# CONFIG_SPL_EFI_PARTITION is not set`
			`CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"`
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2019-11-13 03:46:36 +00:00			`CONFIG_SYS_RELOC_GD_ENV_ADDR=y`