u-boot/drivers/mmc/rockchip_sdhci.c

689 lines
19 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Fuzhou Rockchip Electronics Co., Ltd
*
* Rockchip SD Host Controller Interface
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <dm/ofnode.h>
#include <dt-structs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/libfdt.h>
#include <linux/iopoll.h>
#include <malloc.h>
#include <mapmem.h>
#include "mmc_private.h"
#include <sdhci.h>
#include <syscon.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/hardware.h>
/* DWCMSHC specific Mode Select value */
#define DWCMSHC_CTRL_HS400 0x7
/* 400KHz is max freq for card ID etc. Use that as min */
#define EMMC_MIN_FREQ 400000
#define KHz (1000)
#define MHz (1000 * KHz)
#define SDHCI_TUNING_LOOP_COUNT 40
#define PHYCTRL_CALDONE_MASK 0x1
#define PHYCTRL_CALDONE_SHIFT 0x6
#define PHYCTRL_CALDONE_DONE 0x1
#define PHYCTRL_DLLRDY_MASK 0x1
#define PHYCTRL_DLLRDY_SHIFT 0x5
#define PHYCTRL_DLLRDY_DONE 0x1
#define PHYCTRL_FREQSEL_200M 0x0
#define PHYCTRL_FREQSEL_50M 0x1
#define PHYCTRL_FREQSEL_100M 0x2
#define PHYCTRL_FREQSEL_150M 0x3
#define PHYCTRL_DLL_LOCK_WO_TMOUT(x) \
((((x) >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK) ==\
PHYCTRL_DLLRDY_DONE)
#define ARASAN_VENDOR_REGISTER 0x78
#define ARASAN_VENDOR_ENHANCED_STROBE BIT(0)
/* Rockchip specific Registers */
#define DWCMSHC_EMMC_EMMC_CTRL 0x52c
#define DWCMSHC_CARD_IS_EMMC BIT(0)
#define DWCMSHC_ENHANCED_STROBE BIT(8)
#define DWCMSHC_EMMC_DLL_CTRL 0x800
#define DWCMSHC_EMMC_DLL_CTRL_RESET BIT(1)
#define DWCMSHC_EMMC_DLL_RXCLK 0x804
#define DWCMSHC_EMMC_DLL_TXCLK 0x808
#define DWCMSHC_EMMC_DLL_STRBIN 0x80c
#define DWCMSHC_EMMC_DLL_CMDOUT 0x810
#define DWCMSHC_EMMC_DLL_STATUS0 0x840
#define DWCMSHC_EMMC_DLL_STATUS1 0x844
#define DWCMSHC_EMMC_DLL_START BIT(0)
#define DWCMSHC_EMMC_DLL_LOCKED BIT(8)
#define DWCMSHC_EMMC_DLL_TIMEOUT BIT(9)
#define DWCMSHC_EMMC_DLL_START_POINT 16
#define DWCMSHC_EMMC_DLL_START_DEFAULT 5
#define DWCMSHC_EMMC_DLL_INC_VALUE 2
#define DWCMSHC_EMMC_DLL_INC 8
#define DWCMSHC_EMMC_DLL_BYPASS BIT(24)
#define DWCMSHC_EMMC_DLL_DLYENA BIT(27)
#define DLL_RXCLK_NO_INVERTER BIT(29)
#define DLL_RXCLK_ORI_GATE BIT(31)
#define DLL_TXCLK_TAPNUM_DEFAULT 0x10
#define DLL_TXCLK_TAPNUM_90_DEGREES 0x9
#define DLL_TXCLK_TAPNUM_FROM_SW BIT(24)
#define DLL_TXCLK_NO_INVERTER BIT(29)
#define DLL_STRBIN_TAPNUM_DEFAULT 0x4
#define DLL_STRBIN_TAPNUM_FROM_SW BIT(24)
#define DLL_STRBIN_DELAY_NUM_SEL BIT(26)
#define DLL_STRBIN_DELAY_NUM_OFFSET 16
#define DLL_STRBIN_DELAY_NUM_DEFAULT 0x10
#define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8
#define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24)
#define DLL_CMDOUT_SRC_CLK_NEG BIT(28)
#define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29)
#define DLL_CMDOUT_BOTH_CLK_EDGE BIT(30)
#define DLL_LOCK_WO_TMOUT(x) \
((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \
(((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0))
#define ROCKCHIP_MAX_CLKS 3
#define FLAG_INVERTER_FLAG_IN_RXCLK BIT(0)
struct rockchip_sdhc_plat {
struct mmc_config cfg;
struct mmc mmc;
};
struct rockchip_emmc_phy {
u32 emmcphy_con[7];
u32 reserved;
u32 emmcphy_status;
};
struct rockchip_sdhc {
struct sdhci_host host;
struct udevice *dev;
void *base;
struct rockchip_emmc_phy *phy;
struct clk emmc_clk;
};
struct sdhci_data {
int (*get_phy)(struct udevice *dev);
/**
* set_control_reg() - Set SDHCI control registers
*
* This is the set_control_reg() SDHCI operation that should be
* used for the hardware this driver data is associated with.
* Normally, this is used to set up control registers for
* voltage level and UHS speed mode.
*
* @host: SDHCI host structure
*/
void (*set_control_reg)(struct sdhci_host *host);
/**
* set_ios_post() - Host specific hook after set_ios() calls
*
* This is the set_ios_post() SDHCI operation that should be
* used for the hardware this driver data is associated with.
* Normally, this is a hook that is called after sdhci_set_ios()
* that does any necessary host-specific configuration.
*
* @host: SDHCI host structure
* Return: 0 if successful, -ve on error
*/
int (*set_ios_post)(struct sdhci_host *host);
void (*set_clock)(struct sdhci_host *host, u32 div);
int (*config_dll)(struct sdhci_host *host, u32 clock, bool enable);
/**
* set_enhanced_strobe() - Set HS400 Enhanced Strobe config
*
* This is the set_enhanced_strobe() SDHCI operation that should
* be used for the hardware this driver data is associated with.
* Normally, this is used to set any host-specific configuration
* necessary for HS400 ES.
*
* @host: SDHCI host structure
* Return: 0 if successful, -ve on error
*/
int (*set_enhanced_strobe)(struct sdhci_host *host);
u32 flags;
u8 hs200_txclk_tapnum;
u8 hs400_txclk_tapnum;
};
static void rk3399_emmc_phy_power_on(struct rockchip_emmc_phy *phy, u32 clock)
{
u32 caldone, dllrdy, freqsel;
writel(RK_CLRSETBITS(7 << 4, 0), &phy->emmcphy_con[6]);
writel(RK_CLRSETBITS(1 << 11, 1 << 11), &phy->emmcphy_con[0]);
writel(RK_CLRSETBITS(0xf << 7, 6 << 7), &phy->emmcphy_con[0]);
/*
* According to the user manual, calpad calibration
* cycle takes more than 2us without the minimal recommended
* value, so we may need a little margin here
*/
udelay(3);
writel(RK_CLRSETBITS(1, 1), &phy->emmcphy_con[6]);
/*
* According to the user manual, it asks driver to
* wait 5us for calpad busy trimming. But it seems that
* 5us of caldone isn't enough for all cases.
*/
udelay(500);
caldone = readl(&phy->emmcphy_status);
caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
if (caldone != PHYCTRL_CALDONE_DONE) {
printf("%s: caldone timeout.\n", __func__);
return;
}
/* Set the frequency of the DLL operation */
if (clock < 75 * MHz)
freqsel = PHYCTRL_FREQSEL_50M;
else if (clock < 125 * MHz)
freqsel = PHYCTRL_FREQSEL_100M;
else if (clock < 175 * MHz)
freqsel = PHYCTRL_FREQSEL_150M;
else
freqsel = PHYCTRL_FREQSEL_200M;
/* Set the frequency of the DLL operation */
writel(RK_CLRSETBITS(3 << 12, freqsel << 12), &phy->emmcphy_con[0]);
writel(RK_CLRSETBITS(1 << 1, 1 << 1), &phy->emmcphy_con[6]);
/* REN Enable on STRB Line for HS400 */
writel(RK_CLRSETBITS(0, 1 << 9), &phy->emmcphy_con[2]);
read_poll_timeout(readl, dllrdy, PHYCTRL_DLL_LOCK_WO_TMOUT(dllrdy), 1,
5000, &phy->emmcphy_status);
}
static void rk3399_emmc_phy_power_off(struct rockchip_emmc_phy *phy)
{
writel(RK_CLRSETBITS(1, 0), &phy->emmcphy_con[6]);
writel(RK_CLRSETBITS(1 << 1, 0), &phy->emmcphy_con[6]);
}
static int rk3399_emmc_get_phy(struct udevice *dev)
{
struct rockchip_sdhc *priv = dev_get_priv(dev);
ofnode phy_node;
void *grf_base;
u32 grf_phy_offset, phandle;
phandle = dev_read_u32_default(dev, "phys", 0);
phy_node = ofnode_get_by_phandle(phandle);
if (!ofnode_valid(phy_node)) {
debug("Not found emmc phy device\n");
return -ENODEV;
}
grf_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR_OR_NULL(grf_base)) {
printf("%s Get syscon grf failed", __func__);
return -ENODEV;
}
grf_phy_offset = ofnode_read_u32_default(phy_node, "reg", 0);
priv->phy = (struct rockchip_emmc_phy *)(grf_base + grf_phy_offset);
return 0;
}
static int rk3399_sdhci_set_enhanced_strobe(struct sdhci_host *host)
{
struct mmc *mmc = host->mmc;
u32 vendor;
vendor = sdhci_readl(host, ARASAN_VENDOR_REGISTER);
if (mmc->selected_mode == MMC_HS_400_ES)
vendor |= ARASAN_VENDOR_ENHANCED_STROBE;
else
vendor &= ~ARASAN_VENDOR_ENHANCED_STROBE;
sdhci_writel(host, vendor, ARASAN_VENDOR_REGISTER);
return 0;
}
static void rk3399_sdhci_set_control_reg(struct sdhci_host *host)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct mmc *mmc = host->mmc;
uint clock = mmc->tran_speed;
int cycle_phy = host->clock != clock && clock > EMMC_MIN_FREQ;
if (cycle_phy)
rk3399_emmc_phy_power_off(priv->phy);
sdhci_set_control_reg(host);
/*
* Reinitializing the device tries to set it to lower-speed modes
* first, which fails if the Enhanced Strobe bit is set, making
* the device impossible to use. Set the correct value here to
* let reinitialization attempts succeed.
*/
if (CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT))
rk3399_sdhci_set_enhanced_strobe(host);
};
static int rk3399_sdhci_set_ios_post(struct sdhci_host *host)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct mmc *mmc = host->mmc;
uint clock = mmc->tran_speed;
int cycle_phy = host->clock != clock && clock > EMMC_MIN_FREQ;
if (!clock)
clock = mmc->clock;
if (cycle_phy)
rk3399_emmc_phy_power_on(priv->phy, clock);
return 0;
}
static void rk3568_sdhci_set_clock(struct sdhci_host *host, u32 div)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct mmc *mmc = host->mmc;
ulong rate;
rate = clk_set_rate(&priv->emmc_clk, mmc->clock);
if (IS_ERR_VALUE(rate))
printf("%s: Set clock rate failed: %ld\n", __func__, (long)rate);
}
static int rk3568_sdhci_config_dll(struct sdhci_host *host, u32 clock, bool enable)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
struct mmc *mmc = host->mmc;
int val, ret;
u32 extra, txclk_tapnum;
if (!enable)
return 0;
if (clock >= 100 * MHz) {
/* reset DLL */
sdhci_writel(host, DWCMSHC_EMMC_DLL_CTRL_RESET, DWCMSHC_EMMC_DLL_CTRL);
udelay(1);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
/* Init DLL settings */
extra = DWCMSHC_EMMC_DLL_START_DEFAULT << DWCMSHC_EMMC_DLL_START_POINT |
DWCMSHC_EMMC_DLL_INC_VALUE << DWCMSHC_EMMC_DLL_INC |
DWCMSHC_EMMC_DLL_START;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_CTRL);
ret = read_poll_timeout(readl, val, DLL_LOCK_WO_TMOUT(val), 1,
500,
host->ioaddr + DWCMSHC_EMMC_DLL_STATUS0);
if (ret)
return ret;
extra = DWCMSHC_EMMC_DLL_DLYENA | DLL_RXCLK_ORI_GATE;
if (data->flags & FLAG_INVERTER_FLAG_IN_RXCLK)
extra |= DLL_RXCLK_NO_INVERTER;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK);
txclk_tapnum = data->hs200_txclk_tapnum;
if (mmc->selected_mode == MMC_HS_400 ||
mmc->selected_mode == MMC_HS_400_ES) {
txclk_tapnum = data->hs400_txclk_tapnum;
extra = DLL_CMDOUT_SRC_CLK_NEG |
DLL_CMDOUT_BOTH_CLK_EDGE |
DWCMSHC_EMMC_DLL_DLYENA |
DLL_CMDOUT_TAPNUM_90_DEGREES |
DLL_CMDOUT_TAPNUM_FROM_SW;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_CMDOUT);
}
extra = DWCMSHC_EMMC_DLL_DLYENA |
DLL_TXCLK_TAPNUM_FROM_SW |
DLL_TXCLK_NO_INVERTER |
txclk_tapnum;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_TXCLK);
extra = DWCMSHC_EMMC_DLL_DLYENA |
DLL_STRBIN_TAPNUM_DEFAULT |
DLL_STRBIN_TAPNUM_FROM_SW;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN);
} else {
/*
* Disable DLL and reset both of sample and drive clock.
* The bypass bit and start bit need to be set if DLL is not locked.
*/
extra = DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_CTRL);
sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CMDOUT);
/*
* Before switching to hs400es mode, the driver will enable
* enhanced strobe first. PHY needs to configure the parameters
* of enhanced strobe first.
*/
extra = DWCMSHC_EMMC_DLL_DLYENA |
DLL_STRBIN_DELAY_NUM_SEL |
DLL_STRBIN_DELAY_NUM_DEFAULT << DLL_STRBIN_DELAY_NUM_OFFSET;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN);
}
return 0;
}
static int rk3568_sdhci_set_ios_post(struct sdhci_host *host)
{
struct mmc *mmc = host->mmc;
u32 reg;
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
reg &= ~SDHCI_CTRL_UHS_MASK;
switch (mmc->selected_mode) {
case UHS_SDR25:
case MMC_HS:
case MMC_HS_52:
reg |= SDHCI_CTRL_UHS_SDR25;
break;
case UHS_SDR50:
reg |= SDHCI_CTRL_UHS_SDR50;
break;
case UHS_DDR50:
case MMC_DDR_52:
reg |= SDHCI_CTRL_UHS_DDR50;
break;
case UHS_SDR104:
case MMC_HS_200:
reg |= SDHCI_CTRL_UHS_SDR104;
break;
case MMC_HS_400:
case MMC_HS_400_ES:
reg |= DWCMSHC_CTRL_HS400;
break;
default:
reg |= SDHCI_CTRL_UHS_SDR12;
}
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
reg = sdhci_readw(host, DWCMSHC_EMMC_EMMC_CTRL);
if (IS_MMC(mmc))
reg |= DWCMSHC_CARD_IS_EMMC;
else
reg &= ~DWCMSHC_CARD_IS_EMMC;
if (mmc->selected_mode == MMC_HS_400_ES)
reg |= DWCMSHC_ENHANCED_STROBE;
else
reg &= ~DWCMSHC_ENHANCED_STROBE;
sdhci_writew(host, reg, DWCMSHC_EMMC_EMMC_CTRL);
return 0;
}
static void rockchip_sdhci_set_control_reg(struct sdhci_host *host)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
if (data->set_control_reg)
data->set_control_reg(host);
}
static int rockchip_sdhci_set_ios_post(struct sdhci_host *host)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
if (data->set_ios_post)
return data->set_ios_post(host);
return 0;
}
static void rockchip_sdhci_set_clock(struct sdhci_host *host, u32 div)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
if (data->set_clock)
data->set_clock(host, div);
}
static int rockchip_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
{
struct rockchip_sdhc *priv = dev_get_priv(mmc->dev);
struct sdhci_host *host = &priv->host;
char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
struct mmc_cmd cmd;
u32 ctrl, blk_size;
int ret;
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl |= SDHCI_CTRL_EXEC_TUNING;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
blk_size = SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, 64);
if (opcode == MMC_CMD_SEND_TUNING_BLOCK_HS200 && mmc->bus_width == 8)
blk_size = SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, 128);
sdhci_writew(host, blk_size, SDHCI_BLOCK_SIZE);
sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
cmd.cmdidx = opcode;
cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = 0;
do {
ret = mmc_send_cmd(mmc, &cmd, NULL);
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (ret || tuning_loop_counter-- == 0)
break;
} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
if (ret || tuning_loop_counter < 0 || !(ctrl & SDHCI_CTRL_TUNED_CLK)) {
if (!ret)
ret = -EIO;
printf("%s: Tuning failed: %d\n", __func__, ret);
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
}
/* Enable only interrupts served by the SD controller */
sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK, SDHCI_INT_ENABLE);
return ret;
}
static int rockchip_sdhci_config_dll(struct sdhci_host *host, u32 clock, bool enable)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
if (data->config_dll)
return data->config_dll(host, clock, enable);
return 0;
}
static int rockchip_sdhci_set_enhanced_strobe(struct sdhci_host *host)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
if (data->set_enhanced_strobe)
return data->set_enhanced_strobe(host);
return 0;
}
static struct sdhci_ops rockchip_sdhci_ops = {
.set_control_reg = rockchip_sdhci_set_control_reg,
.set_ios_post = rockchip_sdhci_set_ios_post,
.set_clock = rockchip_sdhci_set_clock,
.platform_execute_tuning = rockchip_sdhci_execute_tuning,
.config_dll = rockchip_sdhci_config_dll,
.set_enhanced_strobe = rockchip_sdhci_set_enhanced_strobe,
};
static int rockchip_sdhci_probe(struct udevice *dev)
{
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct rockchip_sdhc_plat *plat = dev_get_plat(dev);
struct rockchip_sdhc *priv = dev_get_priv(dev);
struct mmc_config *cfg = &plat->cfg;
struct sdhci_host *host = &priv->host;
struct clk clk;
int ret;
host->max_clk = cfg->f_max;
ret = clk_get_by_index(dev, 0, &clk);
if (!ret) {
ret = clk_set_rate(&clk, host->max_clk);
if (IS_ERR_VALUE(ret))
printf("%s clk set rate fail!\n", __func__);
} else {
printf("%s fail to get clk\n", __func__);
}
priv->emmc_clk = clk;
priv->dev = dev;
if (data->get_phy) {
ret = data->get_phy(dev);
if (ret)
return ret;
}
host->ops = &rockchip_sdhci_ops;
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
host->mmc = &plat->mmc;
host->mmc->priv = &priv->host;
host->mmc->dev = dev;
upriv->mmc = host->mmc;
ret = sdhci_setup_cfg(cfg, host, cfg->f_max, EMMC_MIN_FREQ);
if (ret)
return ret;
/*
* Disable use of DMA and force use of PIO mode in SPL to fix an issue
* where loading part of TF-A into SRAM using DMA silently fails.
*/
if (IS_ENABLED(CONFIG_SPL_BUILD) &&
dev_read_bool(dev, "u-boot,spl-fifo-mode"))
host->flags &= ~USE_DMA;
/*
* Reading more than 4 blocks with a single CMD18 command in PIO mode
* triggers Data End Bit Error on RK3568 and RK3588. Limit to reading
* max 4 blocks in one command when using PIO mode.
*/
if (!(host->flags & USE_DMA) &&
(device_is_compatible(dev, "rockchip,rk3568-dwcmshc") ||
device_is_compatible(dev, "rockchip,rk3588-dwcmshc")))
cfg->b_max = 4;
return sdhci_probe(dev);
}
static int rockchip_sdhci_of_to_plat(struct udevice *dev)
{
struct rockchip_sdhc_plat *plat = dev_get_plat(dev);
struct rockchip_sdhc *priv = dev_get_priv(dev);
struct mmc_config *cfg = &plat->cfg;
struct sdhci_host *host = &priv->host;
int ret;
host->name = dev->name;
host->ioaddr = dev_read_addr_ptr(dev);
ret = mmc_of_parse(dev, cfg);
if (ret)
return ret;
return 0;
}
static int rockchip_sdhci_bind(struct udevice *dev)
{
struct rockchip_sdhc_plat *plat = dev_get_plat(dev);
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct sdhci_data rk3399_data = {
.get_phy = rk3399_emmc_get_phy,
.set_control_reg = rk3399_sdhci_set_control_reg,
.set_ios_post = rk3399_sdhci_set_ios_post,
.set_enhanced_strobe = rk3399_sdhci_set_enhanced_strobe,
};
static const struct sdhci_data rk3568_data = {
.set_ios_post = rk3568_sdhci_set_ios_post,
.set_clock = rk3568_sdhci_set_clock,
.config_dll = rk3568_sdhci_config_dll,
.flags = FLAG_INVERTER_FLAG_IN_RXCLK,
.hs200_txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT,
.hs400_txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT,
};
static const struct sdhci_data rk3588_data = {
.set_ios_post = rk3568_sdhci_set_ios_post,
.set_clock = rk3568_sdhci_set_clock,
.config_dll = rk3568_sdhci_config_dll,
.hs200_txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT,
.hs400_txclk_tapnum = DLL_TXCLK_TAPNUM_90_DEGREES,
};
static const struct udevice_id sdhci_ids[] = {
{
.compatible = "arasan,sdhci-5.1",
.data = (ulong)&rk3399_data,
},
{
.compatible = "rockchip,rk3568-dwcmshc",
.data = (ulong)&rk3568_data,
},
{
.compatible = "rockchip,rk3588-dwcmshc",
.data = (ulong)&rk3588_data,
},
{ }
};
U_BOOT_DRIVER(arasan_sdhci_drv) = {
.name = "rockchip_sdhci_5_1",
.id = UCLASS_MMC,
.of_match = sdhci_ids,
.of_to_plat = rockchip_sdhci_of_to_plat,
.ops = &sdhci_ops,
.bind = rockchip_sdhci_bind,
.probe = rockchip_sdhci_probe,
.priv_auto = sizeof(struct rockchip_sdhc),
.plat_auto = sizeof(struct rockchip_sdhc_plat),
};