u-boot/arch/arm/mach-at91/armv7/Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2013
# Bo Shen <voice.shen@atmel.com>

obj-$(CONFIG_SAMA5D2)	+= sama5d2_devices.o clock.o
obj-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o clock.o
obj-$(CONFIG_SAMA5D4)	+= sama5d4_devices.o clock.o
obj-$(CONFIG_SAMA7G5)	+= sama7g5_devices.o
obj-y += cpu.o
ifneq ($(CONFIG_ATMEL_TCB_TIMER),y)
ifneq ($(CONFIG_ATMEL_PIT_TIMER),y)
ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y)
# old non-DM timer driver
obj-y += timer.o
endif
endif
endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
ARM: atmel: add sama5d3xek support Add sama5d3xek support with following feature - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector - boot from SPI flash support - boot from SD card support - LCD support - EMAC support - USB OHCI support Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> 2013-05-12 22:40:54 +00:00			`#`
			`# (C) Copyright 2000-2008`
			`# Wolfgang Denk, DENX Software Engineering, wd@denx.de.`
			`#`
			`# (C) Copyright 2013`
			`# Bo Shen <voice.shen@atmel.com>`

ARM: at91: armv7: sama7g5 uses CCF clock driver SAMA7G5 uses CCF driver under drivers/clk/at91/ and not the custom older at91 clock.c driver. Remove it from the compilation list and adapt cpu.c arch_cpu_init() to avoid calling at91_clock_init() which is wrong anyway. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> 2020-11-11 11:15:08 +00:00			`obj-$(CONFIG_SAMA5D2) += sama5d2_devices.o clock.o`
			`obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o clock.o`
			`obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o clock.o`
ARM: mach-at91: add support for new SoC sama7g5 Add support for new SoC sama7g5 Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> 2020-08-27 08:51:52 +00:00			`obj-$(CONFIG_SAMA7G5) += sama7g5_devices.o`
armv7: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:48 +00:00			`obj-y += cpu.o`
timer: atmel_tcb_timer: add atmel_tcb driver Add a driver for the timer counter block that can be found on sama5d2. This driver will be used when booting under OP-TEE since the pit timer which is part of the SYSC is secured. Channel 1 & 2 are configured to be chained together which allows to have a 64bits counter. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> 2022-03-31 08:55:06 +00:00			`ifneq ($(CONFIG_ATMEL_TCB_TIMER),y)`
ARM: mach-at91: fix timer.o compile condition The AT91 architecture now has two possible timer blocks, the old PIT timer and the new PIT64B. The timer.c file has an old non DM driver that works for platforms that do not use the ATMEL_PIT_TIMER DM-based driver. Update the Makefile to select this old driver in case neither of the ATMEL_PIT_TIMER and the MCHP_PIT64B_TIMER are selected. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> 2020-11-11 16:46:03 +00:00			`ifneq ($(CONFIG_ATMEL_PIT_TIMER),y)`
			`ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y)`
			`# old non-DM timer driver`
armv7: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:48 +00:00			`obj-y += timer.o`
driver: timer: Add the Atmel PIT timer driver Add the new Atmel PIT timer driver, which supports the driver model and device tree. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> 2017-08-15 09:40:26 +00:00			`endif`
ARM: mach-at91: fix timer.o compile condition The AT91 architecture now has two possible timer blocks, the old PIT timer and the new PIT64B. The timer.c file has an old non DM driver that works for platforms that do not use the ATMEL_PIT_TIMER DM-based driver. Update the Makefile to select this old driver in case neither of the ATMEL_PIT_TIMER and the MCHP_PIT64B_TIMER are selected. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> 2020-11-11 16:46:03 +00:00			`endif`
timer: atmel_tcb_timer: add atmel_tcb driver Add a driver for the timer counter block that can be found on sama5d2. This driver will be used when booting under OP-TEE since the pit timer which is part of the SYSC is secured. Channel 1 & 2 are configured to be chained together which allows to have a 64bits counter. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> 2022-03-31 08:55:06 +00:00			`endif`