timer: atmel_tcb_timer: add atmel_tcb driver

Add a driver for the timer counter block that can be found on sama5d2.
This driver will be used when booting under OP-TEE since the pit timer
which is part of the SYSC is secured. Channel 1 & 2 are configured to
be chained together which allows to have a 64bits counter.

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
This commit is contained in:
Clément Léger 2022-03-31 10:55:06 +02:00 committed by Eugen Hristev
parent 746b738224
commit 70fb1ae9dd
5 changed files with 173 additions and 0 deletions

View file

@ -352,6 +352,7 @@ F: arch/arm/mach-at91/
F: board/atmel/
F: drivers/cpu/at91_cpu.c
F: drivers/misc/microchip_flexcom.c
F: drivers/timer/atmel_tcb_timer.c
F: include/dt-bindings/mfd/atmel-flexcom.h
F: drivers/timer/mchp-pit64b-timer.c

View file

@ -14,9 +14,11 @@ obj-y += cpu.o
ifndef CONFIG_$(SPL_TPL_)SYSRESET
obj-y += reset.o
endif
ifneq ($(CONFIG_ATMEL_TCB_TIMER),y)
ifneq ($(CONFIG_ATMEL_PIT_TIMER),y)
ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y)
# old non-DM timer driver
obj-y += timer.o
endif
endif
endif

View file

@ -96,6 +96,14 @@ config ATMEL_PIT_TIMER
it is designed to offer maximum accuracy and efficient management,
even for systems with long response time.
config ATMEL_TCB_TIMER
bool "Atmel timer counter support"
depends on TIMER
depends on ARCH_AT91
help
Select this to enable the use of the timer counter as a monotonic
counter.
config CADENCE_TTC_TIMER
bool "Cadence TTC (Triple Timer Counter)"
depends on TIMER

View file

@ -10,6 +10,7 @@ obj-$(CONFIG_ARC_TIMER) += arc_timer.o
obj-$(CONFIG_AST_TIMER) += ast_timer.o
obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o
obj-$(CONFIG_ATMEL_TCB_TIMER) += atmel_tcb_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o
obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o
obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o

View file

@ -0,0 +1,161 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 Microchip Corporation
*
* Author: Clément Léger <clement.leger@bootlin.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <timer.h>
#include <asm/io.h>
#include <linux/bitops.h>
#define TCB_CHAN(chan) ((chan) * 0x40)
#define TCB_CCR(chan) (0x0 + TCB_CHAN(chan))
#define TCB_CCR_CLKEN (1 << 0)
#define TCB_CMR(chan) (0x4 + TCB_CHAN(chan))
#define TCB_CMR_WAVE (1 << 15)
#define TCB_CMR_TIMER_CLOCK2 1
#define TCB_CMR_XC1 6
#define TCB_CMR_ACPA_SET (1 << 16)
#define TCB_CMR_ACPC_CLEAR (2 << 18)
#define TCB_CV(chan) (0x10 + TCB_CHAN(chan))
#define TCB_RA(chan) (0x14 + TCB_CHAN(chan))
#define TCB_RC(chan) (0x1c + TCB_CHAN(chan))
#define TCB_IDR(chan) (0x28 + TCB_CHAN(chan))
#define TCB_BCR 0xc0
#define TCB_BCR_SYNC (1 << 0)
#define TCB_BMR 0xc4
#define TCB_BMR_TC1XC1S_TIOA0 (2 << 2)
#define TCB_WPMR 0xe4
#define TCB_WPMR_WAKEY 0x54494d
#define TCB_CLK_DIVISOR 8
struct atmel_tcb_plat {
void __iomem *base;
};
static u64 atmel_tcb_get_count(struct udevice *dev)
{
struct atmel_tcb_plat *plat = dev_get_plat(dev);
u64 cv0 = 0;
u64 cv1 = 0;
do {
cv1 = readl(plat->base + TCB_CV(1));
cv0 = readl(plat->base + TCB_CV(0));
} while (readl(plat->base + TCB_CV(1)) != cv1);
cv0 |= cv1 << 32;
return cv0;
}
static void atmel_tcb_configure(void __iomem *base)
{
/* Disable write protection */
writel(TCB_WPMR_WAKEY, base + TCB_WPMR);
/* Disable all irqs for both channel 0 & 1 */
writel(0xff, base + TCB_IDR(0));
writel(0xff, base + TCB_IDR(1));
/*
* In order to avoid wrapping, use a 64 bit counter by chaining
* two channels.
* Channel 0 is configured to generate a clock on TIOA0 which is cleared
* when reaching 0x80000000 and set when reaching 0.
*/
writel(TCB_CMR_TIMER_CLOCK2 | TCB_CMR_WAVE | TCB_CMR_ACPA_SET
| TCB_CMR_ACPC_CLEAR, base + TCB_CMR(0));
writel(0x80000000, base + TCB_RC(0));
writel(0x1, base + TCB_RA(0));
writel(TCB_CCR_CLKEN, base + TCB_CCR(0));
/* Channel 1 is configured to use TIOA0 as input */
writel(TCB_CMR_XC1 | TCB_CMR_WAVE, base + TCB_CMR(1));
writel(TCB_CCR_CLKEN, base + TCB_CCR(1));
/* Set XC1 input to be TIOA0 (ie output of Channel 0) */
writel(TCB_BMR_TC1XC1S_TIOA0, base + TCB_BMR);
/* Sync & start all timers */
writel(TCB_BCR_SYNC, base + TCB_BCR);
}
static int atmel_tcb_probe(struct udevice *dev)
{
struct atmel_tcb_plat *plat = dev_get_plat(dev);
struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct clk clk;
ulong clk_rate;
int ret;
if (!device_is_compatible(dev->parent, "atmel,sama5d2-tcb"))
return -EINVAL;
/* Currently, we only support channel 0 and 1 to be chained */
if (dev_read_addr_index(dev, 0) != 0 &&
dev_read_addr_index(dev, 1) != 1) {
printf("Error: only chained timers 0 and 1 are supported\n");
return -EINVAL;
}
ret = clk_get_by_name(dev->parent, "t0_clk", &clk);
if (ret)
return -EINVAL;
ret = clk_enable(&clk);
if (ret)
return ret;
clk_rate = clk_get_rate(&clk);
if (!clk_rate) {
clk_disable(&clk);
return -EINVAL;
}
uc_priv->clock_rate = clk_rate / TCB_CLK_DIVISOR;
atmel_tcb_configure(plat->base);
return 0;
}
static int atmel_tcb_of_to_plat(struct udevice *dev)
{
struct atmel_tcb_plat *plat = dev_get_plat(dev);
plat->base = dev_read_addr_ptr(dev->parent);
return 0;
}
static const struct timer_ops atmel_tcb_ops = {
.get_count = atmel_tcb_get_count,
};
static const struct udevice_id atmel_tcb_ids[] = {
{ .compatible = "atmel,tcb-timer" },
{ }
};
U_BOOT_DRIVER(atmel_tcb) = {
.name = "atmel_tcb",
.id = UCLASS_TIMER,
.of_match = atmel_tcb_ids,
.of_to_plat = atmel_tcb_of_to_plat,
.plat_auto = sizeof(struct atmel_tcb_plat),
.probe = atmel_tcb_probe,
.ops = &atmel_tcb_ops,
};