Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 13:14:27 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/dwc3/Kconfig

74 lines
2 KiB
Text
Raw Normal View History

usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:25 +00:00
config USB_DWC3
bool "DesignWare USB3 DRD Core Support"
usb: dwc3: fix Kconfig dependency to accept host driver in drivers/usb/dwc3 We see the choice of USB_DWC3_HOST / _GADGET in drivers/usb/dwc3/Kconfig, but we can not choose USB_DWC3_HOST unless USB_GADGET is defined. This is strange. Loosen the "depends on" and also move "select USB_GADGET_DUALSPEED" to the correct place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-24 16:30:20 +00:00
depends on USB_HOST || USB_GADGET
usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:25 +00:00
help
Say Y here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
if USB_DWC3
config USB_DWC3_GADGET
usb: dwc3: Kconfig: get rid of obsolete mode selection The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-11 09:33:53 +00:00
bool "USB Gadget support for DWC3"
default y
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
depends on USB_GADGET
usb: dwc3: fix Kconfig dependency to accept host driver in drivers/usb/dwc3 We see the choice of USB_DWC3_HOST / _GADGET in drivers/usb/dwc3/Kconfig, but we can not choose USB_DWC3_HOST unless USB_GADGET is defined. This is strange. Loosen the "depends on" and also move "select USB_GADGET_DUALSPEED" to the correct place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-24 16:30:20 +00:00
select USB_GADGET_DUALSPEED
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:28 +00:00
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
bool "Texas Instruments OMAP5 and similar Platforms"
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' here if you have one such device
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
config USB_DWC3_GENERIC
dwc3-generic: Handle the PHYs, the clocks and the reset lines This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-11-29 09:52:48 +00:00
bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue)"
depends on DM_USB && USB_DWC3 && MISC
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
help
dwc3-generic: Handle the PHYs, the clocks and the reset lines This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-11-29 09:52:48 +00:00
Select this for Xilinx ZynqMP and similar Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
usb: dwc3: Add Meson G12A USB Glue Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-02-19 12:42:01 +00:00
config USB_DWC3_MESON_G12A
bool "Amlogic Meson G12A USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
imply PHY
help
Select this for Amlogic Meson G12A Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: add Amlogic GXL & GXL DWC3 Glue The USB support was initialy done with a set of PHYs and dwc3-of-simple because the architecture of the USB complex was not understood correctly at the time (and proper documentation was missing...). But with the G12A family, the USB complex was correctly understood and implemented correctly. This adds a proper driver for the glue, based on the G12A one, but with enough changes to require a different driver in U-Boot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-10 08:48:13 +00:00
config USB_DWC3_MESON_GXL
bool "Amlogic Meson GXL USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
imply PHY
help
Select this for Amlogic Meson GXL and GXM Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: add UniPhier specific glue layer Add UniPhier platform specific glue layer to support USB3 Host mode on Synopsys DWC3 IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-09-28 13:01:00 +00:00
config USB_DWC3_UNIPHIER
bool "DesignWare USB3 Host Support on UniPhier Platforms"
depends on ARCH_UNIPHIER && USB_XHCI_DWC3
help
Support of USB2/3 functionality in Socionext UniPhier platforms.
Say 'Y' here if you have one such device.
usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:29 +00:00
menu "PHY Subsystem"
config USB_DWC3_PHY_OMAP
bool "TI OMAP SoC series USB DRD PHY driver"
help
Enable single driver for both USB2 PHY programming and USB3 PHY
programming for TI SoCs.
config USB_DWC3_PHY_SAMSUNG
bool "Exynos5 SoC series USB DRD PHY driver"
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
endmenu
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
endif
Reference in a new issue Copy permalink