u-boot/drivers/pci/w83c553f.c

227 lines
6 KiB
C
Raw Normal View History

2002-09-17 21:37:55 +00:00
/*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Initialisation of the PCI-to-ISA bridge and disabling the BIOS
* write protection (for flash) in function 0 of the chip.
* Enabling function 1 (IDE controller of the chip.
*/
#include <common.h>
#include <config.h>
#ifdef CFG_WINBOND_83C553
#include <asm/io.h>
#include <pci.h>
#include <w83c553f.h>
#define out8(addr,val) do { \
out_8((u8*) (addr),(val)); udelay(1); \
} while (0)
#define out16(addr,val) do { \
out_be16((u16*) (addr),(val)); udelay(1); \
} while (0)
extern uint ide_bus_offset[CFG_IDE_MAXBUS];
void initialise_pic(void);
void initialise_dma(void);
void initialise_w83c553f(void)
{
pci_dev_t devbusfn;
unsigned char reg8;
unsigned short reg16;
unsigned int reg32;
devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0);
if (devbusfn == -1)
{
printf("Error: Cannot find W83C553F controller on any PCI bus.");
return;
}
pci_read_config_word(devbusfn, PCI_COMMAND, &reg16);
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
pci_read_config_byte(devbusfn, WINBOND_IPADCR, &reg8);
/* 16 MB ISA memory space */
reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7);
reg8 &= ~IPADCR_MBE512;
pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8);
pci_read_config_byte(devbusfn, WINBOND_CSCR, &reg8);
/* switch off BIOS write protection */
reg8 |= CSCR_UBIOSCSE;
reg8 &= ~CSCR_BIOSWP;
pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8);
/*
* Interrupt routing:
* - IDE -> IRQ 9/0
* - INTA -> IRQ 10
* - INTB -> IRQ 11
* - INTC -> IRQ 14
* - INTD -> IRQ 15
*/
pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90);
pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF);
/*
* Read IDE bus offsets from function 1 device.
* We must unmask the LSB indicating that ist is an IO address.
*/
devbusfn |= PCI_BDF(0,0,1);
/*
* Switch off legacy IRQ for IDE and IDE port 1.
*/
pci_write_config_byte(devbusfn, 0x09, 0x8F);
pci_read_config_dword(devbusfn, WINDOND_IDECSR, &reg32);
reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16);
pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32);
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
ide_bus_offset[0] &= ~1;
#if CFG_IDE_MAXBUS > 1
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
ide_bus_offset[1] &= ~1;
#endif
/*
* Enable function 1, IDE -> busmastering and IO space access
*/
pci_read_config_word(devbusfn, PCI_COMMAND, &reg16);
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
/*
* Initialise ISA interrupt controller
*/
initialise_pic();
/*
* Initialise DMA controller
*/
initialise_dma();
}
void initialise_pic(void)
{
out8(W83C553F_PIC1_ICW1, 0x11);
out8(W83C553F_PIC1_ICW2, 0x08);
out8(W83C553F_PIC1_ICW3, 0x04);
out8(W83C553F_PIC1_ICW4, 0x01);
out8(W83C553F_PIC1_OCW1, 0xfb);
out8(W83C553F_PIC1_ELC, 0x20);
out8(W83C553F_PIC2_ICW1, 0x11);
out8(W83C553F_PIC2_ICW2, 0x08);
out8(W83C553F_PIC2_ICW3, 0x02);
out8(W83C553F_PIC2_ICW4, 0x01);
out8(W83C553F_PIC2_OCW1, 0xff);
out8(W83C553F_PIC2_ELC, 0xce);
out8(W83C553F_TMR1_CMOD, 0x74);
out8(W83C553F_PIC2_OCW1, 0x20);
out8(W83C553F_PIC1_OCW1, 0x20);
out8(W83C553F_PIC2_OCW1, 0x2b);
out8(W83C553F_PIC1_OCW1, 0x2b);
}
void initialise_dma(void)
{
unsigned int channel;
unsigned int rvalue1, rvalue2;
/* perform a H/W reset of the devices */
out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00);
out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000);
/* initialise all channels to a sane state */
for (channel = 0; channel < 4; channel++) {
/*
* dependent upon the channel, setup the specifics:
*
* demand
* address-increment
* autoinitialize-disable
* verify-transfer
*/
switch (channel) {
case 0:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL);
break;
case 1:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
break;
case 2:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
break;
case 3:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
break;
default:
rvalue1 = 0x00;
rvalue2 = 0x00;
break;
}
/* write to write mode registers */
out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF);
out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF);
}
/* enable all channels */
out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00);
out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000);
/*
* initialize the global DMA configuration
*
* DACK# active low
* DREQ active high
* fixed priority
* channel group enable
*/
out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
}
#endif /* CFG_WINBOND_83C553 */