u-boot/board/altera/common/flash.c

181 lines
4 KiB
C
Raw Normal View History

/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <nios.h>
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*--------------------------------------------------------------------*/
void flash_print_info (flash_info_t * info)
{
int i, k;
unsigned long size;
int erased;
volatile unsigned char *flash;
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
/* Check if whole sector is erased */
if (i != (info->sector_count - 1))
size = info->start[i + 1] - info->start[i];
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
flash = (volatile unsigned char *) info->start[i];
for (k = 0; k < size; k++) {
if (*flash++ != 0xff) {
erased = 0;
break;
}
}
/* Print the info */
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
info->protect[i] ? "RO " : " ");
}
printf ("\n");
}
/*-------------------------------------------------------------------*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int prot, sect;
unsigned oldpri;
ulong start;
/* Some sanity checking */
if ((s_first < 0) || (s_first > s_last)) {
printf ("- no sectors to erase\n");
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
#ifdef DEBUG
for (sect = s_first; sect <= s_last; sect++) {
printf("- Erase: Sect: %i @ 0x%08x\n", sect, info->start[sect]);
}
#endif
/* NOTE: disabling interrupts on Nios can be very bad since it
* also disables the LO_LIMIT exception. It's better here to
* set the interrupt priority to 3 & restore it when we're done.
*/
oldpri = ipri (3);
/* It's ok to erase multiple sectors provided we don't delay more
* than 50 usec between cmds ... at which point the erase time-out
* occurs. So don't go and put printf() calls in the loop ... it
* won't be very helpful ;-)
*/
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
*addr = 0xaa;
*addr = 0x55;
*addr = 0x80;
*addr = 0xaa;
*addr = 0x55;
*addr2 = 0x30;
/* Now just wait for 0xff & provide some user
* feedback while we wait. Here we have to grant
* timer interrupts. Otherwise get_timer() can't
* work right. */
ipri(oldpri);
start = get_timer (0);
while (*addr2 != 0xff) {
udelay (1000 * 1000);
putc ('.');
if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("timeout\n");
return 1;
}
}
oldpri = ipri (3); /* disallow non important irqs again */
}
}
printf ("\n");
/* Restore interrupt priority */
ipri (oldpri);
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
vu_char *cmd = (vu_char *) info->start[0];
vu_char *dst = (vu_char *) addr;
unsigned char b;
unsigned oldpri;
ulong start;
while (cnt) {
/* Check for sufficient erase */
b = *src;
if ((*dst & b) != b) {
printf ("%02x : %02x\n", *dst, b);
return (2);
}
/* Disable interrupts other than window underflow
* (interrupt priority 2)
*/
oldpri = ipri (3);
*cmd = 0xaa;
*cmd = 0x55;
*cmd = 0xa0;
*dst = b;
/* Verify write */
start = get_timer (0);
while (*dst != b) {
if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
ipri (oldpri);
return 1;
}
}
dst++;
src++;
cnt--;
ipri (oldpri);
}
return (0);
}