u-boot/configs/chromebook_coral_defconfig

131 lines
3.6 KiB
Text
Raw Normal View History

CONFIG_X86=y
CONFIG_SYS_TEXT_BASE=0x1110000
CONFIG_SYS_MALLOC_F_LEN=0x3d00
CONFIG_NR_DRAM_BANKS=8
CONFIG_MAX_CPUS=8
spi: Enable missing CONFIG_SPL_DM_SPI support Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-16 23:06:29 +00:00
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="chromebook_coral"
CONFIG_SPL_TEXT_BASE=0xfef10000
CONFIG_TPL_TEXT_BASE=0xffff8000
CONFIG_SPL_SYS_MALLOC_F_LEN=0xf000
CONFIG_BOOTSTAGE_STASH_ADDR=0xfef00000
CONFIG_DEBUG_UART_BASE=0xde000000
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_VENDOR_GOOGLE=y
CONFIG_TARGET_CHROMEBOOK_CORAL=y
CONFIG_DEBUG_UART=y
CONFIG_FSP_VERSION2=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_INTEL_CAR_CQOS=y
CONFIG_X86_OFFSET_U_BOOT=0xffd00000
CONFIG_X86_OFFSET_SPL=0xffe80000
CONFIG_INTEL_ACPIGEN=y
CONFIG_INTEL_GENERIC_WIFI=y
CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_CHROMEOS=y
CONFIG_BOOTSTAGE=y
CONFIG_SPL_BOOTSTAGE=y
CONFIG_TPL_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10
CONFIG_BOOTSTAGE_STASH=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS_SUBST=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tpm init; tpm startup TPM2_SU_CLEAR; read mmc 0:2 100000 0 80; setexpr loader *001004f0; setexpr size *00100518; setexpr blocks $size / 200; read mmc 0:2 100000 80 $blocks; setexpr setup $loader - 1000; setexpr cmdline_ptr $loader - 2000; setexpr.s cmdline *$cmdline_ptr; setexpr cmdline gsub %U \\\\${uuid}; if part uuid mmc 0:2 uuid; then zboot start 100000 0 0 0 $setup cmdline; zboot load; zboot setup; zboot dump; zboot go;fi"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_BLOBLIST=y
# CONFIG_TPL_BLOBLIST is not set
CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_BLOBLIST_SIZE=0x30000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_HANDOFF=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_CPU=y
spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04 15:11:53 +00:00
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_PCI=y
CONFIG_SPL_POWER=y
# CONFIG_SPL_SPI_FLASH_TINY is not set
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_TPL_POWER=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=532
CONFIG_CMD_CPU=y
CONFIG_CMD_PMC=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PART=y
CONFIG_CMD_READ=y
CONFIG_CMD_SATA=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SOUND=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_TPM=y
CONFIG_CMD_CBFS=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MAC_PARTITION=y
# CONFIG_SPL_MAC_PARTITION is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent interrupts linux-name acpi,name acpi,path u-boot,acpi-dsdt-order u-boot,acpi-ssdt-order"
CONFIG_ENV_OVERWRITE=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="bzImage"
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
CONFIG_MISC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_X86_PCH7 is not set
# CONFIG_X86_PCH9 is not set
CONFIG_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_SOUND=y
CONFIG_SOUND_DA7219=y
CONFIG_SOUND_I8254=y
CONFIG_SOUND_MAX98357A=y
CONFIG_SOUND_RT5677=y
CONFIG_SPI=y
CONFIG_ICH_SPI=y
# CONFIG_SYSINFO_SMBIOS is not set
CONFIG_TPL_SYSRESET=y
# CONFIG_TPM_V1 is not set
CONFIG_TPM2_CR50_I2C=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_VIDEO_COPY=y
CONFIG_FS_CBFS=y
CONFIG_SPL_FS_CBFS=y
CONFIG_FAT_WRITE=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
CONFIG_TPL_USE_TINY_PRINTF=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_TPM=y
# CONFIG_GZIP is not set
CONFIG_BLOBLIST_TABLES=y
# CONFIG_EFI_LOADER is not set