u-boot/include/env_internal.h

287 lines
8.1 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
2002-11-03 00:24:07 +00:00
/*
* Internal environment header file. This includes direct access to environment
* information such as its size and offset, direct access to the default
* environment and embedded environment (if used). It also provides environment
* drivers with various declarations.
*
* It should not be included by board files, drivers and code other than that
* related to the environment implementation.
*
2002-11-03 00:24:07 +00:00
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#ifndef _ENV_INTERNAL_H_
#define _ENV_INTERNAL_H_
2002-11-03 00:24:07 +00:00
#include <linux/kconfig.h>
2002-11-03 00:24:07 +00:00
/**************************************************************************
*
* The "environment" is stored as a list of '\0' terminated
* "name=value" strings. The end of the list is marked by a double
* '\0'. New entries are always added at the end. Deleting an entry
* shifts the remaining entries to the front. Replacing an entry is a
* combination of deleting the old value and adding the new one.
*
* The environment is preceded by a 32 bit CRC over the data part.
2002-11-03 00:24:07 +00:00
*
*************************************************************************/
2002-11-03 00:24:07 +00:00
#if defined(CONFIG_ENV_IS_IN_FLASH)
# if defined(CONFIG_ENV_ADDR_REDUND) && \
((CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \
(CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE) <= \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN))
# define ENV_IS_EMBEDDED
2002-11-03 00:24:07 +00:00
# endif
# if (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \
(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) <= \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
# define ENV_IS_EMBEDDED
2002-11-03 00:24:07 +00:00
# endif
# ifdef CONFIG_ENV_IS_EMBEDDED
# error "do not define CONFIG_ENV_IS_EMBEDDED in your board config"
# error "it is calculated automatically for you"
# endif
#endif /* CONFIG_ENV_IS_IN_FLASH */
2002-11-03 00:24:07 +00:00
#if defined(CONFIG_ENV_IS_IN_NAND)
NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB) This is a re-submission of the patch by Harald Welte <laforge@openmoko.org> with minor modifications for rebase and changes as suggested by Scott Wood <scottwood@freescale.com> [1] [2]. This patch enables the environment partition to have a run-time dynamic location (offset) in the NAND flash. The reason for this is simply that all NAND flashes have factory-default bad blocks, and a fixed compile time offset would mean that sometimes the environment partition would live inside factory bad blocks. Since the number of factory default blocks can be quite high (easily 1.3MBytes in current standard components), it is not economic to keep that many spare blocks inside the environment partition. With this patch and CONFIG_ENV_OFFSET_OOB enabled, the location of the environment partition is stored in the out-of-band (OOB) data of the first block in flash. Since the first block is where most systems boot from, the vendors guarantee that the first block is not a factory default block. This patch introduces the 'nand env.oob' command, which can be called from the u-boot command line. 'nand env.oob get' reads the address of the environment partition from the OOB data, 'nand env.oob set {offset,partition-name}' allows the setting of the marker by specifying a numeric offset or a partition name. [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/43916 [2] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/79195 Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Harald Welte <laforge@gnumonks.org>
2010-07-05 17:27:07 +00:00
# if defined(CONFIG_ENV_OFFSET_OOB)
# ifdef CONFIG_ENV_OFFSET_REDUND
# error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB"
# error "is set"
# endif
extern unsigned long nand_env_oob_offset;
# endif /* CONFIG_ENV_OFFSET_OOB */
#endif /* CONFIG_ENV_IS_IN_NAND */
/*
* For the flash types where embedded env is supported, but it cannot be
* calculated automatically (i.e. NAND), take the board opt-in.
*/
#if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED)
# define ENV_IS_EMBEDDED
#endif
/* The build system likes to know if the env is embedded */
#ifdef DO_DEPS_ONLY
# ifdef ENV_IS_EMBEDDED
# ifndef CONFIG_ENV_IS_EMBEDDED
# define CONFIG_ENV_IS_EMBEDDED
# endif
# endif
#endif
#include "compiler.h"
2002-11-03 00:24:07 +00:00
#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
# define ENV_HEADER_SIZE (sizeof(uint32_t) + 1)
2002-11-03 00:24:07 +00:00
#else
# define ENV_HEADER_SIZE (sizeof(uint32_t))
2002-11-03 00:24:07 +00:00
#endif
#define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
2002-11-03 00:24:07 +00:00
/*
* If the environment is in RAM, allocate extra space for it in the malloc
* region.
*/
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE < CONFIG_SYS_MONITOR_BASE) || \
(CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) || \
defined(CONFIG_ENV_IS_IN_NVRAM)
#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
#else
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
typedef struct environment_s {
uint32_t crc; /* CRC32 over data bytes */
#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
unsigned char flags; /* active/obsolete flags ENVF_REDUND_ */
2002-11-03 00:24:07 +00:00
#endif
unsigned char data[ENV_SIZE]; /* Environment data */
} env_t;
2002-11-03 00:24:07 +00:00
#ifdef ENV_IS_EMBEDDED
extern env_t embedded_environment;
#endif /* ENV_IS_EMBEDDED */
#ifdef DEFAULT_ENV_IS_RW
extern char default_environment[];
#else
extern const char default_environment[];
#endif
#ifndef DO_DEPS_ONLY
#include <env_attr.h>
#include <env_callback.h>
#include <env_flags.h>
#include <search.h>
enum env_location {
ENVL_UNKNOWN,
ENVL_EEPROM,
ENVL_EXT4,
ENVL_FAT,
ENVL_FLASH,
ENVL_MMC,
ENVL_NAND,
ENVL_NVRAM,
ENVL_ONENAND,
ENVL_REMOTE,
ENVL_SPI_FLASH,
ENVL_UBI,
ENVL_NOWHERE,
ENVL_COUNT,
};
/* value for the various operations we want to perform on the env */
enum env_operation {
ENVOP_GET_CHAR, /* we want to call the get_char function */
ENVOP_INIT, /* we want to call the init function */
ENVOP_LOAD, /* we want to call the load function */
ENVOP_SAVE, /* we want to call the save function */
ENVOP_ERASE, /* we want to call the erase function */
};
struct env_driver {
const char *name;
enum env_location location;
/**
* load() - Load the environment from storage
*
* This method is required for loading environment
*
* @return 0 if OK, -ve on error
*/
int (*load)(void);
/**
* save() - Save the environment to storage
*
* This method is required for 'saveenv' to work.
*
* @return 0 if OK, -ve on error
*/
int (*save)(void);
/**
* erase() - Erase the environment on storage
*
* This method is optional and required for 'eraseenv' to work.
*
* @return 0 if OK, -ve on error
*/
int (*erase)(void);
/**
* init() - Set up the initial pre-relocation environment
*
* This method is optional.
*
* @return 0 if OK, -ENOENT if no initial environment could be found,
* other -ve on error
*/
int (*init)(void);
};
/* Declare a new environment location driver */
#define U_BOOT_ENV_LOCATION(__name) \
ll_entry_declare(struct env_driver, __name, env_driver)
/* Declare the name of a location */
#ifdef CONFIG_CMD_SAVEENV
#define ENV_NAME(_name) .name = _name,
#else
#define ENV_NAME(_name)
#endif
#ifdef CONFIG_CMD_SAVEENV
#define env_save_ptr(x) x
#else
#define env_save_ptr(x) NULL
#endif
#define ENV_SAVE_PTR(x) (CONFIG_IS_ENABLED(SAVEENV) ? (x) : NULL)
#define ENV_ERASE_PTR(x) (CONFIG_IS_ENABLED(CMD_ERASEENV) ? (x) : NULL)
extern struct hsearch_data env_htab;
/**
* env_ext4_get_intf() - Provide the interface for env in EXT4
*
* It is a weak function allowing board to overidde the default interface for
* U-Boot env in EXT4: CONFIG_ENV_EXT4_INTERFACE
*
* Return: string of interface, empty if not supported
*/
const char *env_ext4_get_intf(void);
/**
* env_ext4_get_dev_part() - Provide the device and partition for env in EXT4
*
* It is a weak function allowing board to overidde the default device and
* partition used for U-Boot env in EXT4: CONFIG_ENV_EXT4_DEVICE_AND_PART
*
* Return: string of device and partition
*/
const char *env_ext4_get_dev_part(void);
2022-04-06 00:21:32 +00:00
/**
* arch_env_get_location()- Provide the best location for the U-Boot environment
*
* It is a weak function allowing board to overidde the environment location
* on architecture level. This has lower priority than env_get_location(),
* which can be defined on board level.
*
* @op: operations performed on the environment
* @prio: priority between the multiple environments, 0 being the
* highest priority
* Return: an enum env_location value on success, or -ve error code.
*/
enum env_location arch_env_get_location(enum env_operation op, int prio);
/**
* env_get_location()- Provide the best location for the U-Boot environment
*
* It is a weak function allowing board to overidde the environment location
2022-04-06 00:21:32 +00:00
* on board level. This has higher priority than arch_env_get_location(),
* which can be defined on architecture level.
*
* @op: operations performed on the environment
* @prio: priority between the multiple environments, 0 being the
* highest priority
* Return: an enum env_location value on success, or -ve error code.
*/
enum env_location env_get_location(enum env_operation op, int prio);
/**
* env_fat_get_intf() - Provide the interface for env in FAT
*
* It is a weak function allowing board to overidde the default interface for
* U-Boot env in FAT: CONFIG_ENV_FAT_INTERFACE
*
* Return: string of interface, empty if not supported
*/
const char *env_fat_get_intf(void);
/**
* env_fat_get_dev_part() - Provide the device and partition for env in FAT
*
* It is a weak function allowing board to overidde the default device and
* partition used for U-Boot env in FAT: CONFIG_ENV_FAT_DEVICE_AND_PART
*
* Return: string of device and partition
*/
char *env_fat_get_dev_part(void);
#endif /* DO_DEPS_ONLY */
#endif /* _ENV_INTERNAL_H_ */