u-boot/arch/arm/dts/rk3568.dtsi

780 lines
20 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
*/
#include <dt-bindings/clock/rk3568-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3568";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
serial6 = &uart6;
serial7 = &uart7;
serial8 = &uart8;
serial9 = &uart9;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x0>;
clocks = <&scmi_clk 0>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
};
cpu1: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x100>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
};
cpu2: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x200>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
};
cpu3: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x300>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: cpu0-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-408000000 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <900000 900000 1150000>;
clock-latency-ns = <40000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000 900000 1150000>;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <900000 900000 1150000>;
opp-suspend;
};
opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <900000 900000 1150000>;
};
opp-1416000000 {
opp-hz = /bits/ 64 <1416000000>;
opp-microvolt = <900000 900000 1150000>;
};
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <975000 975000 1150000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1050000 1050000 1150000>;
};
opp-1992000000 {
opp-hz = /bits/ 64 <1992000000>;
opp-microvolt = <1150000 1150000 1150000>;
};
};
firmware {
scmi: scmi {
compatible = "arm,scmi-smc";
arm,smc-id = <0x82000010>;
shmem = <&scmi_shmem>;
#address-cells = <1>;
#size-cells = <0>;
scmi_clk: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
};
};
pmu {
compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
arm,no-tick-in-suspend;
};
xin24m: xin24m {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xin24m";
#clock-cells = <0>;
};
xin32k: xin32k {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "xin32k";
pinctrl-0 = <&clk32k_out0>;
pinctrl-names = "default";
#clock-cells = <0>;
};
sram@10f000 {
compatible = "mmio-sram";
reg = <0x0 0x0010f000 0x0 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x0010f000 0x100>;
scmi_shmem: sram@0 {
compatible = "arm,scmi-shmem";
reg = <0x0 0x100>;
};
};
gic: interrupt-controller@fd400000 {
compatible = "arm,gic-v3";
reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
<0x0 0xfd460000 0 0x80000>; /* GICR */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
mbi-alias = <0x0 0xfd100000>;
mbi-ranges = <296 24>;
msi-controller;
};
pmugrf: syscon@fdc20000 {
compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xfdc20000 0x0 0x10000>;
};
grf: syscon@fdc60000 {
compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
reg = <0x0 0xfdc60000 0x0 0x10000>;
};
pmucru: clock-controller@fdd00000 {
compatible = "rockchip,rk3568-pmucru";
reg = <0x0 0xfdd00000 0x0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
cru: clock-controller@fdd20000 {
compatible = "rockchip,rk3568-cru";
reg = <0x0 0xfdd20000 0x0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
i2c0: i2c@fdd40000 {
compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfdd40000 0x0 0x1000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
clock-names = "i2c", "pclk";
pinctrl-0 = <&i2c0_xfer>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart0: serial@fdd50000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfdd50000 0x0 0x100>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 0>, <&dmac0 1>;
pinctrl-0 = <&uart0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
pwm0: pwm@fdd70000 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfdd70000 0x0 0x10>;
clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm0m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm1: pwm@fdd70010 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfdd70010 0x0 0x10>;
clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm1m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm2: pwm@fdd70020 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfdd70020 0x0 0x10>;
clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm2m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm3: pwm@fdd70030 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfdd70030 0x0 0x10>;
clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm3_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
sdmmc2: mmc@fe000000 {
compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe000000 0x0 0x4000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
<&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
resets = <&cru SRST_SDMMC2>;
reset-names = "reset";
status = "disabled";
};
sdmmc0: mmc@fe2b0000 {
compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2b0000 0x0 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
<&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
resets = <&cru SRST_SDMMC0>;
reset-names = "reset";
status = "disabled";
};
sdmmc1: mmc@fe2c0000 {
compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2c0000 0x0 0x4000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
<&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
resets = <&cru SRST_SDMMC1>;
reset-names = "reset";
status = "disabled";
};
sdhci: mmc@fe310000 {
compatible = "rockchip,rk3568-dwcmshc";
reg = <0x0 0xfe310000 0x0 0x10000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
assigned-clock-rates = <200000000>, <24000000>;
clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
<&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
<&cru TCLK_EMMC>;
clock-names = "core", "bus", "axi", "block", "timer";
status = "disabled";
};
dmac0: dmac@fe530000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xfe530000 0x0 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
arm,pl330-periph-burst;
clocks = <&cru ACLK_BUS>;
clock-names = "apb_pclk";
#dma-cells = <1>;
};
dmac1: dmac@fe550000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xfe550000 0x0 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
arm,pl330-periph-burst;
clocks = <&cru ACLK_BUS>;
clock-names = "apb_pclk";
#dma-cells = <1>;
};
i2c1: i2c@fe5a0000 {
compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfe5a0000 0x0 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
clock-names = "i2c", "pclk";
pinctrl-0 = <&i2c1_xfer>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@fe5b0000 {
compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfe5b0000 0x0 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
clock-names = "i2c", "pclk";
pinctrl-0 = <&i2c2m0_xfer>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@fe5c0000 {
compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfe5c0000 0x0 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
clock-names = "i2c", "pclk";
pinctrl-0 = <&i2c3m0_xfer>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@fe5d0000 {
compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfe5d0000 0x0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
clock-names = "i2c", "pclk";
pinctrl-0 = <&i2c4m0_xfer>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c5: i2c@fe5e0000 {
compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfe5e0000 0x0 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
clock-names = "i2c", "pclk";
pinctrl-0 = <&i2c5m0_xfer>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: watchdog@fe600000 {
compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
reg = <0x0 0xfe600000 0x0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
clock-names = "tclk", "pclk";
};
uart1: serial@fe650000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe650000 0x0 0x100>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 2>, <&dmac0 3>;
pinctrl-0 = <&uart1m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart2: serial@fe660000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe660000 0x0 0x100>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 4>, <&dmac0 5>;
pinctrl-0 = <&uart2m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart3: serial@fe670000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe670000 0x0 0x100>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 6>, <&dmac0 7>;
pinctrl-0 = <&uart3m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart4: serial@fe680000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe680000 0x0 0x100>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 8>, <&dmac0 9>;
pinctrl-0 = <&uart4m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart5: serial@fe690000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe690000 0x0 0x100>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 10>, <&dmac0 11>;
pinctrl-0 = <&uart5m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart6: serial@fe6a0000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe6a0000 0x0 0x100>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 12>, <&dmac0 13>;
pinctrl-0 = <&uart6m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart7: serial@fe6b0000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe6b0000 0x0 0x100>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 14>, <&dmac0 15>;
pinctrl-0 = <&uart7m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart8: serial@fe6c0000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe6c0000 0x0 0x100>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 16>, <&dmac0 17>;
pinctrl-0 = <&uart8m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart9: serial@fe6d0000 {
compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
reg = <0x0 0xfe6d0000 0x0 0x100>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac0 18>, <&dmac0 19>;
pinctrl-0 = <&uart9m0_xfer>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
pwm4: pwm@fe6e0000 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6e0000 0x0 0x10>;
clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm4_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm5: pwm@fe6e0010 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6e0010 0x0 0x10>;
clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm5_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm6: pwm@fe6e0020 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6e0020 0x0 0x10>;
clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm6_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm7: pwm@fe6e0030 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6e0030 0x0 0x10>;
clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm7_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm8: pwm@fe6f0000 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6f0000 0x0 0x10>;
clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm8m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm9: pwm@fe6f0010 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6f0010 0x0 0x10>;
clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm9m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm10: pwm@fe6f0020 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6f0020 0x0 0x10>;
clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm10m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm11: pwm@fe6f0030 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe6f0030 0x0 0x10>;
clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm11m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm12: pwm@fe700000 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe700000 0x0 0x10>;
clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm12m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm13: pwm@fe700010 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe700010 0x0 0x10>;
clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm13m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm14: pwm@fe700020 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe700020 0x0 0x10>;
clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm14m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pwm15: pwm@fe700030 {
compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xfe700030 0x0 0x10>;
clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
clock-names = "pwm", "pclk";
pinctrl-0 = <&pwm15m0_pins>;
pinctrl-names = "active";
#pwm-cells = <3>;
status = "disabled";
};
pinctrl: pinctrl {
compatible = "rockchip,rk3568-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmugrf>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio0: gpio@fdd60000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfdd60000 0x0 0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@fe740000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe740000 0x0 0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@fe750000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe750000 0x0 0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@fe760000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe760000 0x0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@fe770000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe770000 0x0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
#include "rk3568-pinctrl.dtsi"