u-boot/board/gdsys/common/Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2007
# Stefan Roese, DENX Software Engineering, sr@denx.de.

obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o
obj-$(CONFIG_TARGET_CONTROLCENTERDC) += dp501.o
obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o

ifdef CONFIG_OSD
obj-$(CONFIG_GDSYS_LEGACY_OSD_CMDS) += osd_cmd.o
endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
ppc4xx: Add Io and IoCon 405EP board support Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de> 2010-10-21 08:50:05 +00:00			`#`
			`# (C) Copyright 2007`
			`# Stefan Roese, DENX Software Engineering, sr@denx.de.`

mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-13 18:21:18 +00:00			`obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o`
Correct CONFIG_CONTROLCENTERDC This option does not exist but presumably means to point to CONFIG_TARGET_CONTROLCENTERDC. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> 2023-02-01 20:19:26 +00:00			`obj-$(CONFIG_TARGET_CONTROLCENTERDC) += dp501.o`
mpc83xx: Add gazerbeam board The gdsys gazerbeam board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 2x 10/100 Mbit/s Ethernet (optional) Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc> 2019-03-29 09:18:19 +00:00			`obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o`
cmd: Add osd commands Add command to query information from and write text to on-screen display (OSD) devices. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-09-27 07:19:34 +00:00
			`ifdef CONFIG_OSD`
			`obj-$(CONFIG_GDSYS_LEGACY_OSD_CMDS) += osd_cmd.o`
			`endif`