Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 01:17:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi

369 lines
8.6 KiB
Text
Raw Normal View History

ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
// SPDX-License-Identifier: GPL-2.0+
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
/*
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
* Copyright (C) 2015-2021 DH electronics GmbH
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
*/
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
#include <dt-bindings/gpio/gpio.h>
imx6dl/imx6qdl: synchronise device trees with linux Synchronise device trees with linux-next next-20220708. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:26 +00:00
#include <dt-bindings/input/input.h>
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
/ {
chosen {
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
stdout-path = "serial0:115200n8";
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
};
clk_ext_audio_codec: clock-codec {
#clock-cells = <0>;
clock-frequency = <24000000>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
compatible = "fixed-clock";
};
display_bl: display-bl {
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
compatible = "pwm-backlight";
default-brightness-level = <8>;
enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
status = "okay";
};
lcd_display: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
pinctrl-names = "default";
status = "okay";
port@0 {
reg = <0>;
lcd_display_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
lcd_display_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
};
};
};
gpio-keys {
#size-cells = <0>;
compatible = "gpio-keys";
button-0 {
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
label = "TA1-GPIO-A";
linux,code = <KEY_A>;
pinctrl-0 = <&pinctrl_dhcom_a>;
pinctrl-names = "default";
wakeup-source;
};
button-1 {
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
label = "TA2-GPIO-B";
linux,code = <KEY_B>;
pinctrl-0 = <&pinctrl_dhcom_b>;
pinctrl-names = "default";
wakeup-source;
};
button-2 {
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
label = "TA3-GPIO-C";
linux,code = <KEY_C>;
pinctrl-0 = <&pinctrl_dhcom_c>;
pinctrl-names = "default";
wakeup-source;
};
button-3 {
gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
label = "TA4-GPIO-D";
linux,code = <KEY_D>;
pinctrl-0 = <&pinctrl_dhcom_d>;
pinctrl-names = "default";
wakeup-source;
};
};
led {
compatible = "gpio-leds";
/*
* Disable led-5, because GPIO E is
* already used as touch interrupt.
*/
led-5 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
pinctrl-0 = <&pinctrl_dhcom_e>;
pinctrl-names = "default";
status = "disabled";
};
led-6 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
pinctrl-0 = <&pinctrl_dhcom_f>;
pinctrl-names = "default";
};
led-7 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
pinctrl-0 = <&pinctrl_dhcom_h>;
pinctrl-names = "default";
};
led-8 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
pinctrl-0 = <&pinctrl_dhcom_i>;
pinctrl-names = "default";
};
};
panel {
backlight = <&display_bl>;
compatible = "edt,etm0700g0edh6";
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcd_display_out>;
};
};
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
};
sound {
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT";
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
compatible = "fsl,imx-audio-sgtl5000";
model = "imx-sgtl5000";
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
mux-ext-port = <3>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
mux-int-port = <1>;
ssi-controller = <&ssi1>;
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
};
};
&audmux {
pinctrl-0 = <&pinctrl_audmux_ext>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
pinctrl-names = "default";
status = "okay";
};
&can1 {
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
status = "okay";
};
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
&can2 {
status = "disabled";
};
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2021-11-28 02:53:18 +00:00
/* 1G ethernet */
/delete-node/ &ethphy0;
&fec {
phy-mode = "rgmii";
phy-handle = <&ethphy7>;
pinctrl-0 = <&pinctrl_enet_1G>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
pinctrl-names = "default";
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2021-11-28 02:53:18 +00:00
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy7: ethernet-phy@7 { /* KSZ 9021 */
compatible = "ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy7>;
pinctrl-names = "default";
reg = <7>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2021-11-28 02:53:18 +00:00
rxc-skew-ps = <3000>;
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
rxdv-skew-ps = <0>;
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2021-11-28 02:53:18 +00:00
txc-skew-ps = <3000>;
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
txen-skew-ps = <0>;
};
};
};
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c2 {
sgtl5000: codec@a {
#sound-dai-cells = <0>;
clocks = <&clk_ext_audio_codec>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
compatible = "fsl,sgtl5000";
reg = <0x0a>;
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
VDDA-supply = <&reg_3p3v>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
VDDIO-supply = <&sw2_reg>;
};
touchscreen@38 {
compatible = "edt,edt-ft5406";
interrupt-parent = <&gpio4>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
pinctrl-0 = <&pinctrl_dhcom_e>;
pinctrl-names = "default";
reg = <0x38>;
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
};
};
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
&ipu1_di0_disp0 {
remote-endpoint = <&lcd_display_in>;
};
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
&pcie {
pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
status = "okay";
};
&pwm1 {
status = "okay";
};
&ssi1 {
status = "okay";
};
imx6dl/imx6qdl: synchronise device trees with linux Synchronise device trees with linux-next next-20220708. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:26 +00:00
&usbh1 {
disable-over-current;
};
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
&usdhc2 { /* SD card */
status = "okay";
};
&iomuxc {
pinctrl-0 = <
/*
* The following DHCOM GPIOs are used on this board.
* Therefore, they have been removed from the list below.
* A: key TA1
* B: key TA2
* C: key TA3
* D: key TA4
* E: touchscreen
* F: led6
* G: backlight enable
* H: led7
* I: led8
* J: PCIe reset
*/
&pinctrl_hog_base
&pinctrl_dhcom_k &pinctrl_dhcom_l
&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
>;
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
pinctrl-names = "default";
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
pinctrl_audmux_ext: audmux-ext-grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
>;
};
pinctrl_enet_1G: enet-1G-grp {
fsl,pins = <
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2021-11-28 02:53:18 +00:00
>;
};
pinctrl_ethphy7: ethphy7-grp {
fsl,pins = <
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2021-11-28 02:53:18 +00:00
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
>;
};
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
fsl,pins = <
ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-30 23:58:08 +00:00
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening of already existing device trees. To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by imx6q-dhcom-pdk2.dts. Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:47 +00:00
>;
};
};
Reference in a new issue Copy permalink