mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 08:13:17 +00:00
140 lines
2.4 KiB
Text
140 lines
2.4 KiB
Text
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Copyright (c) 2022 MediaTek Inc.
|
||
|
* Author: Sam Shih <sam.shih@mediatek.com>
|
||
|
*/
|
||
|
|
||
|
/dts-v1/;
|
||
|
#include "mt7981.dtsi"
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
||
|
/ {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
model = "mt7981-rfb";
|
||
|
compatible = "mediatek,mt7981", "mediatek,mt7981-sd-rfb";
|
||
|
chosen {
|
||
|
stdout-path = &uart0;
|
||
|
tick-timer = &timer0;
|
||
|
};
|
||
|
|
||
|
reg_3p3v: regulator-3p3v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "fixed-3.3V";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&uart0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart1_pins>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ð {
|
||
|
status = "okay";
|
||
|
mediatek,gmac-id = <0>;
|
||
|
phy-mode = "sgmii";
|
||
|
mediatek,switch = "mt7531";
|
||
|
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
|
||
|
|
||
|
fixed-link {
|
||
|
speed = <1000>;
|
||
|
full-duplex;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pinctrl {
|
||
|
spic_pins: spi1-pins-func-1 {
|
||
|
mux {
|
||
|
function = "spi";
|
||
|
groups = "spi1_1";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
uart1_pins: spi1-pins-func-3 {
|
||
|
mux {
|
||
|
function = "uart";
|
||
|
groups = "uart1_2";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* pin15 as pwm0 */
|
||
|
one_pwm_pins: one-pwm-pins {
|
||
|
mux {
|
||
|
function = "pwm";
|
||
|
groups = "pwm0_1";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* pin15 as pwm0 and pin14 as pwm1 */
|
||
|
two_pwm_pins: two-pwm-pins {
|
||
|
mux {
|
||
|
function = "pwm";
|
||
|
groups = "pwm0_1", "pwm1_0";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* pin15 as pwm0, pin14 as pwm1, pin7 as pwm2 */
|
||
|
three_pwm_pins: three-pwm-pins {
|
||
|
mux {
|
||
|
function = "pwm";
|
||
|
groups = "pwm0_1", "pwm1_0", "pwm2";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
mmc0_pins_default: mmc0default {
|
||
|
mux {
|
||
|
function = "flash";
|
||
|
groups = "emmc_45";
|
||
|
};
|
||
|
conf-cmd-dat {
|
||
|
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO",
|
||
|
"SPI0_CS", "SPI0_HOLD", "SPI0_WP",
|
||
|
"SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
|
||
|
input-enable;
|
||
|
drive-strength = <MTK_DRIVE_4mA>;
|
||
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||
|
};
|
||
|
conf-clk {
|
||
|
pins = "SPI1_CS";
|
||
|
drive-strength = <MTK_DRIVE_6mA>;
|
||
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||
|
};
|
||
|
conf-rst {
|
||
|
pins = "PWM0";
|
||
|
drive-strength = <MTK_DRIVE_4mA>;
|
||
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pwm {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&two_pwm_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&watchdog {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&mmc0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&mmc0_pins_default>;
|
||
|
bus-width = <4>;
|
||
|
max-frequency = <52000000>;
|
||
|
cap-sd-highspeed;
|
||
|
r_smpl = <0>;
|
||
|
vmmc-supply = <®_3p3v>;
|
||
|
vqmmc-supply = <®_3p3v>;
|
||
|
status = "okay";
|
||
|
};
|