Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 21:24:29 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/Makefile

124 lines
3.6 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 01:06:16 +00:00
spl: Allow cache drivers to be used in SPL Add an option for building cache drivers in SPL. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-11 05:48:33 +00:00
obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
obj-$(CONFIG_$(SPL_TPL_)DM) += core/
dfu: Make DFU support more SPL friendly Do this by using $(SPL_) in Makefiles and CONFIG_IS_ENABLED in C code. This ensures the files and features are only built into the right build for which they are enabled. Using the macros to simplify this patch was made possible by the config symbol rename done in the last patch. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-17 19:43:03 +00:00
obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
spl: kconfig: separate sysreset and firmware drivers from misc This adds separate kconfig options for drivers/sysreset and drivers/firmware. Up to now, CONFIG_SPL_DRIVERS_MISC_SUPPORT added drivers/misc to SPL build but also added drivers/firmware and drivers/sysreset at the same time. Since that is confusing, this patch uses CONFIG_SPL_SYSRESET for drivers/sysreset and adds CONFIG_SPL_FIRMWARE for drivers/firmware (and accordingly for the TPL options). CONFIG_SPL_DRIVERS_MISC_SUPPORT stays for including drivers/misc into the SPL build (and accordingly for TPL) since there are boards using non-DM (non UCLASS_MISC) files from drivers/misc. Such boards don't have CONFIG_SPL_MISC enabled, so cannot use this to include drivers/misc into the SPL build. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-16 19:29:32 +00:00
obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/
obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)LED) += led/
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
mtd: Makefile: deep cleanup Move MTD-related lines out of the root Makefile. Put them in their respective directories. Enclose some of these new lines to skip them when building the SPL. MTD core files and some MTD device drivers are compiled in a mtd.o object and included in the final object only if MTD support is required (there are two different symbols for that, one for U-Boot and one for the SPL). Now that all defconfigs have been fixed, we can stop the logic where enabling a command selects the core files to compile. This logic is broken since selecting a symbol with a 'depends on' will not enforce this secondary dependency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:31 +00:00
obj-y += mtd/
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-06 10:10:08 +00:00
obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
dm: timer: normalise SPL and TPL support To fully support DM timer in SPL and TPL, we need a few things cleaned up and normalised: - inclusion of the uclass and drivers should be an all-or-nothing decision for each stage and under control of $(SPL_TPL_)TIMER instead of having the two-level configuration with TIMER and $(SPL_TPL_)TIMER_SUPPORT - when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can not be compiled in This normalises configuration to $(SPL_TPL_)TIMER and moves the config options to drivers/timer/Kconfig (and cleans up the collateral damage to some defconfigs that had SPL_TIMER_SUPPORT enabled). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 15:38:42 +00:00
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
dm: Add a new uclass driver for VirtIO transport devices This adds a new virtio uclass driver for “virtio” [1] family of devices that are are found in virtual environments like QEMU, yet by design they look like physical devices to the guest. The uclass driver provides child_pre_probe() and child_post_probe() methods to do some common operations for virtio device drivers like device and driver supported feature negotiation, etc. [1] http://docs.oasis-open.org/virtio/virtio/v1.0/virtio-v1.0.pdf Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-15 09:21:00 +00:00
obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
spl: Allow mailbox drivers to be used within SPL Add an option for building mailbox drivers within SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:27:49 +00:00
obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
spl: Allow remoteproc drivers to be used within SPL Add an option for building remoteproc drivers within SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:27:53 +00:00
obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
x86: sandbox: Add a PMC emulator and test Add a simple PMC for sandbox to permit tests to run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:41:54 +00:00
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
drivers: board: Make the board drivers available in SPL Make the board driver available in the SPL too. The board driver is a way to provide useful information about the board and that can be useful in the SPL too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-22 14:39:18 +00:00
obj-$(CONFIG_$(SPL_)BOARD) += board/
dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:45 +00:00
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
ifndef CONFIG_TPL_BUILD
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
ifdef CONFIG_SPL_BUILD
bootcount: spl: Enable bootcount support in SPL New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been added to allow drivers/bootcount code re-usage in SPL. This code is necessary to use and setup bootcount in SPL in the case of falcon boot mode. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-02 14:10:50 +00:00
obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
spl: cache: Allow cache drivers in SPL When ax25-ae350 try to enable v5l2 cache driver in SPL configuration, it need this option for cache support in SPL. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-11-14 05:52:26 +00:00
obj-$(CONFIG_SPL_CACHE_SUPPORT) += cache/
spl: Allow CPU drivers to be used in SPL Add a new Kconfig option to allow CPU drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:29 +00:00
obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
verified-boot: Minimal support for booting U-Boot proper from SPL This allows a board to configure verified boot within the SPL using a FIT or FIT with external data. It also allows the SPL to perform signature verification without needing relocation. The board configuration will need to add the following feature defines: CONFIG_SPL_CRYPTO_SUPPORT CONFIG_SPL_HASH_SUPPORT CONFIG_SPL_SHA256 In this example, SHA256 is the only selected hashing algorithm. And the following booleans: CONFIG_SPL=y CONFIG_SPL_DM=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT=y CONFIG_SPL_OF_CONTROL=y CONFIG_SPL_OF_LIBFDT=y CONFIG_SPL_FIT_SIGNATURE=y Signed-off-by: Teddy Reed <teddy.reed@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Andreas Dannenberg <dannenberg@ti.com> Acked-by: Sumit Garg <sumit.garg@nxp.com>
2016-06-10 02:18:44 +00:00
obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig Until now, the SoC selection for the ARCH_MVEBU platforms has been done in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As it needed to get selected for AXP and A38x based boards. This patch now changes this to move the SoC selection to Kconfig. And also uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x. This makes things a bit clearer - especially for new board additions. Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available CONFIG_ARMADA_38X and CONFIG_ARMADA_XP. And CONFIG_DDR3 is removed, as its not referenced anywhere. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-12-21 12:56:33 +00:00
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
ddr: altera: Compile ALTERA SDRAM in SPL only Compile ALTERA_SDRAM driver in SPL only. Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06 01:55:59 +00:00
obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
drivers: ddr: introduce DDR driver for i.MX8M Introduce DDR driver for i.MX8M. The driver will be used by SPL to initialze DDR PHY and DDR Controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 10:19:57 +00:00
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
power: Add CONFIG_SPL_POWER_DOMAIN config Add CONFIG_SPL_POWER_DOMAIN config entry. Build drivers/power/domain if this config is selected. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-27 02:20:37 +00:00
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET, so can use CONFIG_IS_ENABLED(DM_RESET) checking in reset.h later. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-14 10:45:19 +00:00
obj-$(CONFIG_SPL_DM_RESET) += reset/
Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-15 11:30:41 +00:00
obj-$(CONFIG_SPL_DMA) += dma/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
spl: Kconfig: Rename SPL_USBETH_SUPPORT to SPL_USB_ETHER to match with the U-boot CONFIG Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER. This enables users to block text using CONFIG_IS_ENABLED() instead of resorting to #if ladders with SPL and non-SPL cases. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-16 15:47:44 +00:00
obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET The SPL option for USB gadget should be named after the option for u-boot (CONFIG_USB_GADGET) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 14:44:13 +00:00
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
scsi: Move drivers into new drivers/scsi directory At present we have the SCSI drivers in the drivers/block and common/ directories. It is better to split them out into their own place. Use drivers/scsi which is what Linux does. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-15 03:28:27 +00:00
obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
blk: Rework guard around part_init call The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05 13:23:38 +00:00
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
drivers: Enable FPGA driver build on SPL Enable FPGA driver build for Arria 10 SPL because FPGA driver is needed by Arria 10 SPL to configure and getting DDR up before loading U-boot into DDR and booting from there. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26 05:05:41 +00:00
obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
thermal: ti-bandgap: Add support for temperature sensor The dra7xx series of SOCs contain a temperature sensor and an associated analog-to-digital converter (ADC) which produces an output which is proportional to the SOC temperature. Add support for this temperature sensor. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-14 10:42:31 +00:00
obj-$(CONFIG_SPL_THERMAL) += thermal/
drivers: spl: consistently use the $(SPL_TPL_) macro To simplify drivers/Makefile a bit when using TPL/SPL, we consistently use the $(SPL_TPL_) macro to test for drivers that have separate configuration symbols for the full U-boot, SPL and TPL stages. Instead of explicitly repeating them in two separate if-guarded sections of the Makefile, we can now simply list these options once. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 09:29:55 +00:00
endif
Use separate options for TPL support At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:25 +00:00
endif
ifdef CONFIG_TPL_BUILD
obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
endif
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
Use separate options for TPL support At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:25 +00:00
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
dm: adc: add simple ADC uclass implementation This commit adds: - new uclass id: UCLASS_ADC - new uclass driver: drivers/adc/adc-uclass.c The new uclass's API allows for ADC operation on: * single-channel with channel selection by a number * multti-channel with channel selection by bit mask ADC uclass's functions: * single-channel: - adc_start_channel() - start channel conversion - adc_channel_data() - get conversion data - adc_channel_single_shot() - start/get conversion data * multi-channel: - adc_start_channels() - start selected channels conversion - adc_channels_data() - get conversion data - adc_channels_single_shot() - start/get conversion data for channels selected by bit mask * general: - adc_stop() - stop the conversion - adc_vdd_value() - positive reference Voltage value with polarity [uV] - adc_vss_value() - negative reference Voltage value with polarity [uV] - adc_data_mask() - conversion data bit mask The device tree can provide below constraints/properties: - vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1) - vss-polarity-negative: if true: Vss = vss-microvolts * (-1) - vdd-supply: phandle to Vdd regulator's node - vss-supply: phandle to Vss regulator's node And optional, checked only if the above corresponding, doesn't exist: - vdd-microvolts: positive reference Voltage [uV] - vss-microvolts: negative reference Voltage [uV] Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:00 +00:00
obj-y += adc/
sata: Move drivers into new drivers/ata directory At present we have the SATA and PATA drivers mixed up in the drivers/block directory. It is better to split them out into their own place. Use drivers/ata which is what Linux does. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-15 03:28:26 +00:00
obj-y += ata/
kbuild: refactor some makefiles [1] Move driver/core/, driver/input/ and drivers/input/ entries from the top Makefile to drivers/Makefile [2] Remove the conditional by CONFIG_DM in drivers/core/Makefile because the whole drivers/core directory is already selected by CONFIG_DM in the upper level [3] Likewise for CONFIG_DM_DEMO in drivers/demo/Makefile [4] Simplify common/Makefile - both CONFIG_DDR_SPD and CONFIG_SPD_EEPROM are boolean macros so they can directly select objects Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-09-18 06:43:41 +00:00
obj-$(CONFIG_DM_DEMO) += demo/
drivers: descend into sub directories only when it is necessary - Descend into drivers/fpga/ only when CONFIG_FPGA=y - Descend into drivers/bios_emulator only when CONFIG_BIOSEMU=y Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-11 05:35:51 +00:00
obj-$(CONFIG_BIOSEMU) += bios_emulator/
drivers: move some drivers to drivers/Makefile This commit moves some drivers subdirectory entry from the toplevel Makefile to drivers/Makefile using Kbuild descending feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 11:38:52 +00:00
obj-y += block/
obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
dm: cache: Create a uclass for cache The cache UCLASS will be used for configure settings that can be found in a CPU's L2 cache controller. Add a uclass and a test for cache. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-04-23 21:55:03 +00:00
obj-y += cache/
dm: Implement a CPU uclass It is useful to be able to keep track of the available CPUs in a multi-CPU system. This uclass is mostly intended for use with SMP systems. The uclass provides methods for getting basic information about each CPU. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-29 02:25:09 +00:00
obj-$(CONFIG_CPU) += cpu/
drivers: move some drivers to drivers/Makefile This commit moves some drivers subdirectory entry from the toplevel Makefile to drivers/Makefile using Kbuild descending feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 11:38:52 +00:00
obj-y += crypto/
fastboot: Extract fastboot_okay/fail to fb_common.c Add drivers/fastboot/fb_common.c, where fastboot_okay/fail are implemented so we can call them from a non-USB implementation. Introduce fastboot_response which takes varargs parameters so we can use it to generate formatted response strings. Refactor fastboot_okay/fail to use it. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-29 15:30:41 +00:00
obj-$(CONFIG_FASTBOOT) += fastboot/
drivers: descend into sub directories only when it is necessary - Descend into drivers/fpga/ only when CONFIG_FPGA=y - Descend into drivers/bios_emulator only when CONFIG_BIOSEMU=y Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-11 05:35:51 +00:00
obj-$(CONFIG_FPGA) += fpga/
drivers: move some drivers to drivers/Makefile This commit moves some drivers subdirectory entry from the toplevel Makefile to drivers/Makefile using Kbuild descending feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 11:38:52 +00:00
obj-y += misc/
mmc: descend into drivers/mmc only when CONFIG_MMC is enabled This simplifies makefiles. Also, arrange the order of objects in drivers/mmc/Makefile so that the framework objects are listed before drivers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-09 11:31:40 +00:00
obj-$(CONFIG_MMC) += mmc/
nvme: Add NVM Express driver support NVM Express (NVMe) is a register level interface that allows host software to communicate with a non-volatile memory subsystem. This interface is optimized for enterprise and client solid state drives, typically attached to the PCI express interface. This adds a U-Boot driver support of devices that follow the NVMe standard [1] and supports basic read/write operations. Tested with a 400GB Intel SSD 750 series NVMe card with controller id 8086:0953. [1] http://www.nvmexpress.org/resources/specifications/ Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com> Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 09:30:57 +00:00
obj-$(CONFIG_NVME) += nvme/
drivers: pci_ep: Introduce UCLASS_PCI_EP uclass Introduce new UCLASS_PCI_EP class for handling PCI endpoint devices, allowing to set various attributes of the PCI endpoint device, such as: * configuration space header * BAR definitions * outband memory mapping * start/stop PCI link Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-27 08:15:21 +00:00
obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
x86: sandbox: pch: Add a CONFIG option for PCH At present this uclass is selected only on x86. In order to add a test for it, it must also support sandbox. Create a new CONFIG_PCH option and enable it on x86 and sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-17 03:24:49 +00:00
obj-y += dfu/
obj-$(CONFIG_PCH) += pch/
phy: Add Allwinner A64 USB PHY driver USB PHY implementation for Allwinner SOC's can be handling in to single driver with different phy configs. This driver handle all Allwinner USB PHY's start from 4I to 50I(except 9I). Currently added A64 compatibility more will add in next coming patches. Current implementation is unable to get pinctrl, clock and reset details from DT since the dm code on these will add it future. Driver named as phy-sun4i-usb.c since the same PHY logic work for all Allwinner SOC's start from 4I to A64 except 9I with different phy configurations. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-07 07:33:26 +00:00
obj-y += phy/allwinner/
drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k This version is based on the Marvell U-Boot version with this patch applied as latest patch: Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb device mode" from 2016-07-05. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-05-23 09:12:05 +00:00
obj-y += phy/marvell/
phy: rockchip: Add Rockchip USB2PHY driver Add Rockchip USB2PHY driver with initial support. This will help to use it for EHCI controller in host mode, and USB 3.0 controller in otg mode. More functionality like charge, vbus detection will add it in future changes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-26 03:33:44 +00:00
obj-y += phy/rockchip/
drivers: move some drivers to drivers/Makefile This commit moves some drivers subdirectory entry from the toplevel Makefile to drivers/Makefile using Kbuild descending feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 11:38:52 +00:00
obj-y += rtc/
scsi: Move drivers into new drivers/scsi directory At present we have the SCSI drivers in the drivers/block and common/ directories. It is better to split them out into their own place. Use drivers/scsi which is what Linux does. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-15 03:28:27 +00:00
obj-y += scsi/
drivers: move some drivers to drivers/Makefile This commit moves some drivers subdirectory entry from the toplevel Makefile to drivers/Makefile using Kbuild descending feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 11:38:52 +00:00
obj-y += sound/
drivers: Add SPMI bus uclass Qualcom processors use proprietary bus to talk with PMIC devices - SPMI (System Power Management Interface). On wiring level it is similar to I2C, but on protocol level, it's multi-master and has simple autodetection capabilities. This commit adds simple uclass that provides bus read/write interface. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:27 +00:00
obj-y += spmi/
drivers: move some drivers to drivers/Makefile This commit moves some drivers subdirectory entry from the toplevel Makefile to drivers/Makefile using Kbuild descending feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 11:38:52 +00:00
obj-y += video/
obj-y += watchdog/
drivers/qe: move the entry to drivers/Makefile Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-11 05:35:57 +00:00
obj-$(CONFIG_QE) += qe/
qe: add u-qe support to arm board ls1021 is arm-core and support qe which is u-qe. add u-qe init for arm board. Signed-off-by: Zhao Qiang <B45475@freescale.com> [York Sun: Fix compiling error caused by u_qe_init()] Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-25 05:52:25 +00:00
obj-$(CONFIG_U_QE) += qe/
Add a mailbox driver framework/uclass A mailbox is a hardware mechanism for transferring small message and/or notifications between the CPU on which U-Boot runs and some other device such as an auxilliary CPU running firmware or a hardware module. This patch defines a standard API that connects mailbox clients to mailbox providers (drivers). Initially, DT is the only supported method for connecting the two. The DT binding specification (mailbox.txt) was taken from Linux kernel v4.5's Documentation/devicetree/bindings/mailbox/mailbox.txt. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-13 21:50:29 +00:00
obj-y += mailbox/
ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c Move AEMIF driver to drivers/memory/ti-aemif.c along with AEMIF definitions collected in arch/arm/include/asm/ti-common/ti-aemif.h Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-06-07 02:10:49 +00:00
obj-y += memory/
mtd: Makefile: deep cleanup Move MTD-related lines out of the root Makefile. Put them in their respective directories. Enclose some of these new lines to skip them when building the SPL. MTD core files and some MTD device drivers are compiled in a mtd.o object and included in the final object only if MTD support is required (there are two different symbols for that, one for U-Boot and one for the SPL). Now that all defconfigs have been fixed, we can stop the logic where enabling a command selects the core files to compile. This logic is broken since selecting a symbol with a 'depends on' will not enforce this secondary dependency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-25 17:39:31 +00:00
obj-y += mtd/
pwm, imx6: add support for pwm modul on imx6 add basic support for the pwm modul found on imx6. Pieces of this code are based on linux code from drivers/pwm/pwm-imx.c Commit "cd3de83f1476 Linux 3.16-rc4" Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2014-07-18 04:07:19 +00:00
obj-y += pwm/
Add a reset driver framework/uclass A reset controller is a hardware module that controls reset signals that affect other hardware modules or chips. This patch defines a standard API that connects reset clients (i.e. the drivers for devices affected by reset signals) to drivers for reset controllers/providers. Initially, DT is the only supported method for connecting the two. The DT binding specification (reset.txt) was taken from Linux kernel v4.5's Documentation/devicetree/bindings/reset/reset.txt. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-17 15:43:58 +00:00
obj-y += reset/
kbuild: refactor some makefiles [1] Move driver/core/, driver/input/ and drivers/input/ entries from the top Makefile to drivers/Makefile [2] Remove the conditional by CONFIG_DM in drivers/core/Makefile because the whole drivers/core directory is already selected by CONFIG_DM in the upper level [3] Likewise for CONFIG_DM_DEMO in drivers/demo/Makefile [4] Simplify common/Makefile - both CONFIG_DDR_SPD and CONFIG_SPD_EEPROM are boolean macros so they can directly select objects Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-09-18 06:43:41 +00:00
obj-y += input/
soc: keystone_serdes: create a separate SGMII SerDes driver This patch split the Keystone II SGMII SerDes related code from Ethernet driver and create a separate SGMII SerDes driver. The SerDes driver can be used by others keystone subsystems like PCI, sRIO, so move it to driver/soc/keystone directory. Add soc specific drivers directory like in the Linux kernel. It is going to be used by keysotone soc specific drivers. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-22 14:18:21 +00:00
# SOC specific infrastructure drivers.
dm: SMEM (Shared memory) uclass This is a uclass for Shared memory manager drivers. A Shared Memory Manager driver implements an interface for allocating and accessing items in the memory area shared among all of the processors. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-01 23:57:55 +00:00
obj-y += smem/
DM: thermal: Add imx thermal DM driver Add a new thermal uclass for thermal sensor and implement the imx thermal driver basing on this uclass. Signed-off-by: Ye.Li <B37916@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2014-11-20 13:14:13 +00:00
obj-y += thermal/
Add UCLASS_TEE for Trusted Execution Environment Adds a uclass to interface with a TEE (Trusted Execution Environment). A TEE driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. The over all design is based on the TEE subsystem in the Linux kernel, tailored for U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-09-25 14:40:09 +00:00
obj-$(CONFIG_TEE) += tee/
drivers: Add AXI uclass Add a uclass for AXI (Advanced eXtensible Interface) busses, and a driver for the gdsys IHS AXI bus on IHS FPGAs. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-09 12:51:16 +00:00
obj-y += axi/
ufs: Add Initial Support for UFS subsystem Add Support for UFS Host Controller Interface (UFSHCI) for communicating with Universal Flash Storage (UFS) devices. The steps to initialize the host controller interface are the following: - Initiate the Host Controller Initialization process by writing to the Host controller enable register. - Configure the Host Controller base address registers by allocating a host memory space and related data structures. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests Also register this host controller as a SCSI host controller. Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to U-boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-15 12:54:36 +00:00
obj-y += ufs/
w1: Add 1-Wire uclass We might want to use 1-Wire devices connected on boards such as EEPROMs in U-Boot. Provide a framework to be able to do that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-18 07:35:24 +00:00
obj-$(CONFIG_W1) += w1/
W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs We might want to access data stored onto one wire EEPROMs. Create a framework to provide a consistent API. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked patch] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-18 07:35:27 +00:00
obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32. This driver initializes PIC32 DDR2 SDRAM controller and internal DDR2 Phy module. DDR2 controller operates in half-rate mode (upto 533MHZ frequency). Signed-off-by: Paul Thacker <paul.thacker@microchip.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 10:00:15 +00:00
obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
dm: Add Hardware Spinlock class This is uclass for Hardware Spinlocks. It implements two mandatory operations: lock and unlock and one optional relax operation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-11-27 12:49:50 +00:00
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
dm: rng: Add random number generator(rng) uclass Add a uclass for reading a random number seed from a random number generator device. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-12-28 18:28:27 +00:00
obj-$(CONFIG_DM_RNG) += rng/
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
endif
drivers: Descend to drivers/soc unconditionally Descend to drivers/soc directory unconditionally for SPL and U-Boot builds. Individual drivers can have their own config to check what needs to be built for SPL. There should be no increase in SPL code size due to this change. This is required on K3 SoCs to support DMA in SPL. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-04 05:39:48 +00:00
obj-y += soc/
Reference in a new issue Copy permalink