u-boot/arch/arm/mach-at91/include/mach/hardware.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 */
#ifndef __ASM_ARM_ARCH_HARDWARE_H__
#define __ASM_ARM_ARCH_HARDWARE_H__

#if defined(CONFIG_AT91RM9200)
# include <asm/arch/at91rm9200.h>
#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) || \
	defined(CONFIG_AT91SAM9XE)
# include <asm/arch/at91sam9260.h>
#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
# include <asm/arch/at91sam9261.h>
#elif defined(CONFIG_AT91SAM9263)
# include <asm/arch/at91sam9263.h>
#elif defined(CONFIG_AT91SAM9RL)
# include <asm/arch/at91sam9rl.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
# include <asm/arch/at91sam9g45.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9x5.h>
#elif defined(CONFIG_SAM9X60)
# include <asm/arch/sam9x60.h>
#elif defined(CONFIG_SAMA7G5)
# include <asm/arch/sama7g5.h>
#elif defined(CONFIG_SAMA5D2)
# include <asm/arch/sama5d2.h>
#elif defined(CONFIG_SAMA5D3)
# include <asm/arch/sama5d3.h>
#elif defined(CONFIG_SAMA5D4)
# include <asm/arch/sama5d4.h>
#else
# error "Unsupported AT91 processor"
#endif

#endif /* __ASM_ARM_ARCH_HARDWARE_H__ */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
AT91CAP9 support : include/ files Signed-off-by: Stelian Pop <stelian@popies.net> 2008-01-31 21:15:53 +00:00			`/*`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`* (C) Copyright 2007-2008`
Fix Stelian's email address Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de> 2011-10-31 23:00:39 +00:00			`* Stelian Pop <stelian@popies.net>`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`* Lead Tech Design <www.leadtechdesign.com>`
AT91CAP9 support : include/ files Signed-off-by: Stelian Pop <stelian@popies.net> 2008-01-31 21:15:53 +00:00			`*/`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`#ifndef __ASM_ARM_ARCH_HARDWARE_H__`
			`#define __ASM_ARM_ARCH_HARDWARE_H__`
AT91CAP9 support : include/ files Signed-off-by: Stelian Pop <stelian@popies.net> 2008-01-31 21:15:53 +00:00
Finish header files reworking Replace AT91CAP9.h file with several splitted header files coming from the Linux kernel. This is part 2 of the replacement: more header imports and edits. Signed-off-by: Stelian Pop <stelian@popies.net> 2008-03-26 18:52:31 +00:00			`#if defined(CONFIG_AT91RM9200)`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`# include <asm/arch/at91rm9200.h>`
			`#elif defined(CONFIG_AT91SAM9260) \|\| defined(CONFIG_AT91SAM9G20) \|\| \`
			`defined(CONFIG_AT91SAM9XE)`
			`# include <asm/arch/at91sam9260.h>`
at91: Introduction of at91sam9g10 SOC. AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> 2009-06-25 15:04:15 +00:00			`#elif defined(CONFIG_AT91SAM9261) \|\| defined(CONFIG_AT91SAM9G10)`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`# include <asm/arch/at91sam9261.h>`
Finish header files reworking Replace AT91CAP9.h file with several splitted header files coming from the Linux kernel. This is part 2 of the replacement: more header imports and edits. Signed-off-by: Stelian Pop <stelian@popies.net> 2008-03-26 18:52:31 +00:00			`#elif defined(CONFIG_AT91SAM9263)`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`# include <asm/arch/at91sam9263.h>`
Finish header files reworking Replace AT91CAP9.h file with several splitted header files coming from the Linux kernel. This is part 2 of the replacement: more header imports and edits. Signed-off-by: Stelian Pop <stelian@popies.net> 2008-03-26 18:52:31 +00:00			`#elif defined(CONFIG_AT91SAM9RL)`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`# include <asm/arch/at91sam9rl.h>`
at91: Introduction of at91sam9g45 SOC. AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> 2009-07-09 08:16:29 +00:00			`#elif defined(CONFIG_AT91SAM9G45) \|\| defined(CONFIG_AT91SAM9M10G45)`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`# include <asm/arch/at91sam9g45.h>`
arm: at91: add at91sam9n12 register definition Since at91sam9n12 is a subset of at91sam9x5, so put all at91sam9n12 definitions in at91sam9x5 head file. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> 2013-04-16 23:42:43 +00:00			`#elif defined(CONFIG_AT91SAM9N12) \|\| defined(CONFIG_AT91SAM9X5)`
arm : Atmel : add at91sam9x5ek board support Add at91sam9x5ek board support, this board support the following SoCs AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35 Using at91sam9x5ek_nandflash to configure for the board Now only supports NAND with software ECC boot up Signed-off-by: Bo Shen <voice.shen@atmel.com> [move MAINTAINERS entry to right place] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> 2012-07-05 17:21:46 +00:00			`# include <asm/arch/at91sam9x5.h>`
ARM: at91: Add sam9x60 soc Add new Microchip sam9x60 SoC based on an ARM926. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> [tudor.ambarus@microchip.com: fix SFR definition] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> 2019-09-27 13:08:40 +00:00			`#elif defined(CONFIG_SAM9X60)`
			`# include <asm/arch/sam9x60.h>`
ARM: mach-at91: add support for new SoC sama7g5 Add support for new SoC sama7g5 Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> 2020-08-27 08:51:52 +00:00			`#elif defined(CONFIG_SAMA7G5)`
			`# include <asm/arch/sama7g5.h>`
arm: atmel: Add SAMA5D2 Xplained board The board supports following features: - Boot media support: SD card/e.MMC/SPI flash, - Support LCD display (optional, disabled by default), - Support ethernet, - Support USB mass storage. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> [fix checkpatch warnings] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> 2015-10-30 01:55:52 +00:00			`#elif defined(CONFIG_SAMA5D2)`
			`# include <asm/arch/sama5d2.h>`
ARM: atmel: add sama5d3xek support Add sama5d3xek support with following feature - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector - boot from SPI flash support - boot from SD card support - LCD support - EMAC support - USB OHCI support Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> 2013-05-12 22:40:54 +00:00			`#elif defined(CONFIG_SAMA5D3)`
			`# include <asm/arch/sama5d3.h>`
ARM: atmel: add sama5d4ek board support The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display - Support ethernet - Support USB mass storage Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> 2014-11-10 07:24:02 +00:00			`#elif defined(CONFIG_SAMA5D4)`
			`# include <asm/arch/sama5d4.h>`
Finish header files reworking Replace AT91CAP9.h file with several splitted header files coming from the Linux kernel. This is part 2 of the replacement: more header imports and edits. Signed-off-by: Stelian Pop <stelian@popies.net> 2008-03-26 18:52:31 +00:00			`#else`
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`# error "Unsupported AT91 processor"`
Finish header files reworking Replace AT91CAP9.h file with several splitted header files coming from the Linux kernel. This is part 2 of the replacement: more header imports and edits. Signed-off-by: Stelian Pop <stelian@popies.net> 2008-03-26 18:52:31 +00:00			`#endif`
AT91CAP9 support : include/ files Signed-off-by: Stelian Pop <stelian@popies.net> 2008-01-31 21:15:53 +00:00
AT91: cleanup hardware.h, remove memory-map.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 2010-11-03 10:30:23 +00:00			`#endif /* __ASM_ARM_ARCH_HARDWARE_H__ */`