u-boot/arch/arm/mach-omap2/omap5/Kconfig

166 lines
3.7 KiB
Text
Raw Normal View History

if OMAP54XX
config DRA7XX
bool
help
DRA7xx is an OMAP based SOC with Dual Core A-15s.
choice
prompt "OMAP5 board select"
optional
config TARGET_CL_SOM_AM57X
bool "CompuLab CL-SOM-AM57x"
select DRA7XX
config TARGET_CM_T54
bool "CompuLab CM-T54"
config TARGET_OMAP5_UEVM
bool "TI OMAP5 uEVM board"
config TARGET_DRA7XX_EVM
bool "TI DRA7XX"
select BOARD_LATE_INIT
select DRA7XX
select TI_I2C_BOARD_DETECT
select PHYS_64BIT
config TARGET_AM57XX_EVM
bool "AM57XX"
select BOARD_LATE_INIT
select DRA7XX
select TI_I2C_BOARD_DETECT
endchoice
config SYS_SOC
default "omap5"
config TI_SECURE_EMIF_REGION_START
hex "Reserved EMIF region start address"
depends on TI_SECURE_DEVICE
default 0x0
help
Reserved EMIF region start address. Set to "0" to auto-select
to be at the end of the external memory region.
config TI_SECURE_EMIF_TOTAL_REGION_SIZE
hex "Reserved EMIF region size"
depends on TI_SECURE_DEVICE
default 0x0
help
Total reserved EMIF region size. Default is 0, which means no reserved EMIF
region on secure devices.
config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
hex "Size of protected region within reserved EMIF region"
depends on TI_SECURE_DEVICE
default 0x0
help
This config option is used to specify the size of the portion of the total
reserved EMIF region set aside for secure OS needs that will be protected
using hardware memory firewalls. This value must be smaller than the
TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM
menu "Voltage Domain OPP selections"
choice
prompt "MPU Voltage Domain"
default DRA7_MPU_OPP_NOM
help
Select the Operating Performance Point(OPP) for the MPU voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_MPU_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for MPU. This is the safest
option for booting.
endchoice
choice
prompt "DSPEVE Voltage Domain"
help
Select the Operating Performance Point(OPP) for the DSPEVE voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_DSPEVE_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for DSPEVE. This is the safest
option for booting and choose this when unsure about other OPPs .
config DRA7_DSPEVE_OPP_OD
bool "OPP OD"
help
This config option enables Over drive OPP for DSPEVE.
config DRA7_DSPEVE_OPP_HIGH
bool "OPP HIGH"
help
This config option enables High OPP for DSPEVE.
endchoice
choice
prompt "IVA Voltage Domain"
help
Select the Operating Performance Point(OPP) for the IVA voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_IVA_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for IVA. This is the safest
option for booting and choose this when unsure about other OPPs .
config DRA7_IVA_OPP_OD
bool "OPP OD"
help
This config option enables Over drive OPP for IVA.
config DRA7_IVA_OPP_HIGH
bool "OPP HIGH"
help
This config option enables High OPP for IVA.
endchoice
choice
prompt "GPU Voltage Domain"
help
Select the Operating Performance Point(OPP) for the GPU voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_GPU_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for GPU. This is the safest
option for booting and choose this when unsure about other OPPs .
config DRA7_GPU_OPP_OD
bool "OPP OD"
help
This config option enables Over drive OPP for GPU.
config DRA7_GPU_OPP_HIGH
bool "OPP HIGH"
help
This config option enables High OPP for GPU.
endchoice
endmenu
endif
source "board/compulab/cl-som-am57x/Kconfig"
source "board/compulab/cm_t54/Kconfig"
source "board/ti/omap5_uevm/Kconfig"
source "board/ti/dra7xx/Kconfig"
board: ti: beagle_x15: Rename to indicate support for TI am57xx evms BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-29 21:50:43 +00:00
source "board/ti/am57xx/Kconfig"
endif