u-boot/board/toradex/apalis-imx8x/Kconfig

if TARGET_APALIS_IMX8X

config SYS_BOARD
	default "apalis-imx8x"

config SYS_VENDOR
	default "toradex"

config SYS_CONFIG_NAME
	default "apalis-imx8x"

config TDX_CFG_BLOCK
	default y

config TDX_HAVE_MMC
	default y

config TDX_CFG_BLOCK_DEV
	default "0"

config TDX_CFG_BLOCK_PART
	default "1"

# Toradex config block in eMMC, at the end of 1st "boot sector"
config TDX_CFG_BLOCK_OFFSET
	default "-512"

config IMX_CONFIG
	default "board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"

source "board/toradex/common/Kconfig"

endif
board: toradex: add apalis-imx8x 2gb wb it v1.1a module support This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet () - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> 2020-10-22 08:21:38 +00:00			`if TARGET_APALIS_IMX8X`

			`config SYS_BOARD`
			`default "apalis-imx8x"`

			`config SYS_VENDOR`
			`default "toradex"`

			`config SYS_CONFIG_NAME`
			`default "apalis-imx8x"`

			`config TDX_CFG_BLOCK`
			`default y`

			`config TDX_HAVE_MMC`
			`default y`

			`config TDX_CFG_BLOCK_DEV`
			`default "0"`

			`config TDX_CFG_BLOCK_PART`
			`default "1"`

			`# Toradex config block in eMMC, at the end of 1st "boot sector"`
			`config TDX_CFG_BLOCK_OFFSET`
			`default "-512"`

imx: Finish migration of IMX_CONFIG to Kconfig - Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-25 00:41:00 +00:00			`config IMX_CONFIG`
			`default "board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"`

board: toradex: add apalis-imx8x 2gb wb it v1.1a module support This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet () - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> 2020-10-22 08:21:38 +00:00			`source "board/toradex/common/Kconfig"`

			`endif`