Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 18:28:55 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/tegra-common-post.h

169 lines
3.3 KiB
C
Raw Normal View History

tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-08 07:37:19 +00:00
* SPDX-License-Identifier: GPL-2.0+
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
*/
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#ifndef __TEGRA_COMMON_POST_H
#define __TEGRA_COMMON_POST_H
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
ARM: tegra: fix malloc region sizing Commit 52a7c98a1772 "tegra-common: increase malloc pool len by dfu mmc file buffer size" updated the definition of CONFIG_SYS_MALLOC_LEN for Tegra to take account of the DFU buffer size. However, this change had no effect, since typical Tegra board config headers don't set the DFU- related defines until after tegra-common.h is included. Fix this by moving the affected conditional code to tegra-common-post.h, which is included last. Also move the definition of SYS_NONCACHED_MEMORY since it's a related and adjacent definition. Fix the condition to test for the DFU feature, rather than specifically MMC DFU support, so it applies in all cases. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-09-05 04:03:48 +00:00
/*
* Size of malloc() pool
*/
#ifdef CONFIG_USB_FUNCTION_DFU
ARM: tegra: tweak DFU buffer sizes CONFIG_SYS_DFU_DATA_BUF_SIZE defines the size of chunks transferred across USB. This doesn't need to be particularly large, since it doesn't limit the overall transfer size. CONFIG_SYS_DFU_MAX_FILE_SIZE is used to buffer an entire file before writing it to a filesystem. This define limits the maximum file size that may be transferred. Bump this up to 32MiB in order to support large uncompressed kernel images. Both of these buffers are dynamically allocated, and so the size of both needs to be taken into account when calculating the required malloc region size. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-09-05 04:03:49 +00:00
#define CONFIG_SYS_MALLOC_LEN (SZ_4M + \
CONFIG_SYS_DFU_DATA_BUF_SIZE + \
CONFIG_SYS_DFU_MAX_FILE_SIZE)
ARM: tegra: fix malloc region sizing Commit 52a7c98a1772 "tegra-common: increase malloc pool len by dfu mmc file buffer size" updated the definition of CONFIG_SYS_MALLOC_LEN for Tegra to take account of the DFU buffer size. However, this change had no effect, since typical Tegra board config headers don't set the DFU- related defines until after tegra-common.h is included. Fix this by moving the affected conditional code to tegra-common-post.h, which is included last. Also move the definition of SYS_NONCACHED_MEMORY since it's a related and adjacent definition. Fix the condition to test for the DFU feature, rather than specifically MMC DFU support, so it applies in all cases. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-09-05 04:03:48 +00:00
#else
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
#endif
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
ARM: tegra: use new generic $bootcmd Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 22:37:15 +00:00
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
#else
ARM: tegra: use new generic $bootcmd Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 22:37:15 +00:00
#define BOOTENV
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
#endif
tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h Move environment settings for stdin/stdout/stderr to tegra-common-post.h and generate them automaticaly based on input device selection. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2012-10-24 08:32:05 +00:00
#ifdef CONFIG_TEGRA_KEYBOARD
#define STDIN_KBD_KBC ",tegra-kbc"
#else
#define STDIN_KBD_KBC ""
#endif
#ifdef CONFIG_USB_KEYBOARD
#define STDIN_KBD_USB ",usbkbd"
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_PREBOOT "usb start"
#else
#define STDIN_KBD_USB ""
#endif
tegra: config: Use CONFIG_LCD to detect LCD presence Instead of CONFIG_VIDEO_TEGRA, use CONFIG_LCD to determine whether an LCD is present. Tegra124 uses a different driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-04-15 03:03:31 +00:00
#ifdef CONFIG_LCD
tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS Only add "lcd" into TEGRA_DEVICE_SETTINGS if CONFIG_VIDEO_TEGRA. Otherwise, "lcd" is meaningless. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-01-22 06:20:07 +00:00
#define STDOUT_LCD ",lcd"
#else
#define STDOUT_LCD ""
#endif
tegra: Allow CONFIG_DM_VIDEO to be used as well as CONFIG_LCD While we transition to using driver model for video, we need to support both options. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-01-30 23:37:49 +00:00
#ifdef CONFIG_DM_VIDEO
#define STDOUT_VIDEO ",vidconsole"
#else
#define STDOUT_VIDEO ""
#endif
tegra: cros_ec: Add tegra support for Chrome OS EC This requires a change to stdin to include the 'cros-ec-keyb' input device. Put this in the common file, enabled by the relevant CONFIG. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-05 20:39:32 +00:00
#ifdef CONFIG_CROS_EC_KEYB
#define STDOUT_CROS_EC ",cros-ec-keyb"
#else
#define STDOUT_CROS_EC ""
#endif
tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h Move environment settings for stdin/stdout/stderr to tegra-common-post.h and generate them automaticaly based on input device selection. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2012-10-24 08:32:05 +00:00
#define TEGRA_DEVICE_SETTINGS \
tegra: cros_ec: Add tegra support for Chrome OS EC This requires a change to stdin to include the 'cros-ec-keyb' input device. Put this in the common file, enabled by the relevant CONFIG. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-05 20:39:32 +00:00
"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB STDOUT_CROS_EC "\0" \
tegra: Allow CONFIG_DM_VIDEO to be used as well as CONFIG_LCD While we transition to using driver model for video, we need to support both options. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-01-30 23:37:49 +00:00
"stdout=serial" STDOUT_LCD STDOUT_VIDEO "\0" \
"stderr=serial" STDOUT_LCD STDOUT_VIDEO "\0" \
tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS Only add "lcd" into TEGRA_DEVICE_SETTINGS if CONFIG_VIDEO_TEGRA. Otherwise, "lcd" is meaningless. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-01-22 06:20:07 +00:00
""
tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h Move environment settings for stdin/stdout/stderr to tegra-common-post.h and generate them automaticaly based on input device selection. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2012-10-24 08:32:05 +00:00
ARM: tegra: set env vars to indicate Cardhu A04 support The U-Boot "cardhu" build supports only revision 4 of the Cardhu board and later compatible revisions. Hence, set $board_name in the default environment to "cardhu-a04" rather than just "cardhu". The Linux kernel has separate DTs for Cardhu A02 and A04, although the former isn't really supported any more. Consequently, the kernel DT file that matches the U-Boot cardhu build is "tegra30-cardhu-a04.dtb" rather than "tegra30-cardhu.dtb". Set the $fdtfile default environment variable to reflect this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-01-23 20:17:01 +00:00
#ifndef BOARD_EXTRA_ENV_SETTINGS
#define BOARD_EXTRA_ENV_SETTINGS
#endif
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization As best I can tell, CONFIG_SYS_LOAD_ADDR and CONFIG_LOADADDR/$loadaddr serve essentially the same purpose. Roughly, if a command takes a load address, then CONFIG_SYS_LOAD_ADDR or $loadaddr (or both) are the default if the command-line does not specify the address. Different U-Boot commands are inconsistent re: which of the two default values they use. As such, set the two to the same value, and move the logic that does this into tegra-common-post.h so it's not duplicated. A number of other non- Tegra boards do this too. The values chosen for these macros are no longer consistent with anything in MEM_LAYOUT_ENV_SETTINGS. Regain consistency by setting $kernel_addr_r to CONFIG_LOADADDR. Older scripts tend to use $loadaddr for the default kernel load address, whereas newer scripts and features tend to use $kernel_addr_r, along with other variables for other purposes such as DTBs and initrds. Hence, it's logical they should share the same value. I had originally thought to make the $kernel_addr_r and CONFIG_LOADADDR have different values. This would guarantee no interference if a script used the two variables for different purposes. However, that scenario is unlikely given the semantic meaning associated with the two variables. The lowest available value is 0x90200000; see comments for MEM_LAYOUT_ENV_SETTINGS in tegra30-common-post.h for details. However, that value would be problematic for a script that loaded a raw zImage to $loadaddr, since it's more than 128MB beyond the start of SDRAM, which would interfere with the kernel's CONFIG_AUTO_ZRELADDR. So, let's not do that. The only potential fallout I could foresee from this patch is if someone has a script that loads the kernel to $loadaddr, but some other file (DTB, initrd) to a hard-coded address that the new value of $loadaddr interferes with. This seems unlikely. A user should not do that; they should either hard-code all load addresses, or use U-Boot-supplied variables for all load addresses. Equally, any fallout due to this change is trivial to fix; simply modify the load addresses in that script. Cc: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Paul Walmsley <pwalmsley@nvidia.com> Reviewed-by: Simon Glass Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-04-01 21:40:53 +00:00
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
tegra: config: Allow Chrome OS environment settings to be included Bring these in if they are provided by the board. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-05 20:39:44 +00:00
#ifndef CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS
#define CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS
#endif
ARM: Tegra210: Add support to common Tegra source/config files Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-03-04 23:36:00 +00:00
#ifdef CONFIG_ARM64
#define FDT_HIGH "ffffffffffffffff"
#define INITRD_HIGH "ffffffffffffffff"
#else
#define FDT_HIGH "ffffffff"
#define INITRD_HIGH "ffffffff"
#endif
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
#define CONFIG_EXTRA_ENV_SETTINGS \
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
TEGRA_DEVICE_SETTINGS \
ARM: tegra: use standard variables to define load addresses Currently, Tegra's default environment uses non-standard variables to define where boot scripts should load the kernel, FDT, and initrd. This change both changes the variable names to match those described in U-Boot's README, and shuffles their values around a little so that the values make a little more sense; see comments in the patch for rationale behind the values chosen. Note that this patch does remove the old non-standard variable "fdt_load" from the default environment, so this patch requires people to change their boot scripts. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-02 09:26:51 +00:00
MEM_LAYOUT_ENV_SETTINGS \
ARM: Tegra210: Add support to common Tegra source/config files Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-03-04 23:36:00 +00:00
"fdt_high=" FDT_HIGH "\0" \
"initrd_high=" INITRD_HIGH "\0" \
ARM: tegra: use new generic $bootcmd Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 22:37:15 +00:00
BOOTENV \
tegra: config: Allow Chrome OS environment settings to be included Bring these in if they are provided by the board. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-05 20:39:44 +00:00
BOARD_EXTRA_ENV_SETTINGS \
CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS
tegra: flesh out bootcmd This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
tegra114: add SPI driver Add driver for tegra114 SPI controller. This controller is not compatible with either the tegra20 or tegra30 controllers, so it requires a new driver. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-16 18:58:13 +00:00
#if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI)
dm: tegra: spi: Convert to driver model This converts the Tegra SPI drivers to use driver model. This is tested on: - Tegra20 - trimslice - Tegra30 - beaver - Tegra124 - dalmore (not tested on Tegra124) Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-14 05:42:13 +00:00
#define CONFIG_TEGRA_SPI
spi: add common fdt SPI driver interface Add a common interface to fdt based SPI drivers. Each driver is represented by a table entry in fdt_spi_drivers[]. If there are multiple SPI drivers in the table, the first driver to return success from spi_init() will be registered as the SPI driver. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-16 18:58:07 +00:00
#endif
tegra20: enable SPL for tegra20 boards Add SPL options to tegra20 config files and enable SPL build for tegra20 boards. Also remove redundant code from u-boot that is not contained in SPL. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:12 +00:00
/* overrides for SPL build here */
#ifdef CONFIG_SPL_BUILD
tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build Then we can get rid of the #ifdef CONFIG_TEGRA guard in cpu_init_crit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-21 13:45:18 +00:00
#define CONFIG_SKIP_LOWLEVEL_INIT
tegra20: enable SPL for tegra20 boards Add SPL options to tegra20 config files and enable SPL build for tegra20 boards. Also remove redundant code from u-boot that is not contained in SPL. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:12 +00:00
/* remove I2C support */
tegra: i2c: Enable new CONFIG_SYS_I2C framework This enables CONFIG_SYS_I2C on Tegra, updating existing boards and the Tegra i2c driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heiko Schocher <hs@denx.de>
2012-10-30 07:28:53 +00:00
#ifdef CONFIG_SYS_I2C_TEGRA
#undef CONFIG_SYS_I2C_TEGRA
tegra20: enable SPL for tegra20 boards Add SPL options to tegra20 config files and enable SPL build for tegra20 boards. Also remove redundant code from u-boot that is not contained in SPL. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:12 +00:00
#endif
#ifdef CONFIG_CMD_I2C
#endif
/* remove MMC support */
#ifdef CONFIG_MMC
#undef CONFIG_MMC
#endif
#ifdef CONFIG_GENERIC_MMC
#undef CONFIG_GENERIC_MMC
#endif
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#ifdef CONFIG_TEGRA_MMC
#undef CONFIG_TEGRA_MMC
tegra20: enable SPL for tegra20 boards Add SPL options to tegra20 config files and enable SPL build for tegra20 boards. Also remove redundant code from u-boot that is not contained in SPL. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:12 +00:00
#endif
#ifdef CONFIG_CMD_MMC
#endif
/* remove partitions/filesystems */
#ifdef CONFIG_DOS_PARTITION
#undef CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_EFI_PARTITION
#undef CONFIG_EFI_PARTITION
#endif
tegra: use generic fs commands in BOOTCOMMAND Modify tegra-common-post.h's BOOTCOMMAND definition to use the generic filesystem command load rather than separate fatload and ext2load. This removes the need to iterate over supported filesystem types in the boot command. This requires editing all board config headers to enable the new commands. The now-unused commands are left enabled to assue backwards compatibility with any user scripts. Boards (all from Avionic Design) which define custom BOOTCOMMAND values are not affected. Signed-off-by: Stephen Warren <swarren@nvidia.com> tegra generic fs cmds fixup Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-05 13:22:00 +00:00
#ifdef CONFIG_FS_EXT4
#undef CONFIG_FS_EXT4
#endif
#ifdef CONFIG_FS_FAT
#undef CONFIG_FS_FAT
#endif
tegra20: enable SPL for tegra20 boards Add SPL options to tegra20 config files and enable SPL build for tegra20 boards. Also remove redundant code from u-boot that is not contained in SPL. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:12 +00:00
/* remove USB */
#ifdef CONFIG_USB_EHCI
#undef CONFIG_USB_EHCI
#endif
#ifdef CONFIG_USB_EHCI_TEGRA
#undef CONFIG_USB_EHCI_TEGRA
#endif
#ifdef CONFIG_USB_STORAGE
#undef CONFIG_USB_STORAGE
#endif
#ifdef CONFIG_CMD_USB
#endif
tegra: enable CONFIG_CMD_PART This is extremely likely to be used from the boot.scr that Tegra's default bootcmd locates and executes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-25 13:32:26 +00:00
/* remove part command support */
#ifdef CONFIG_PARTITION_UUIDS
#undef CONFIG_PARTITION_UUIDS
#endif
#ifdef CONFIG_CMD_PART
#undef CONFIG_CMD_PART
#endif
tegra20: enable SPL for tegra20 boards Add SPL options to tegra20 config files and enable SPL build for tegra20 boards. Also remove redundant code from u-boot that is not contained in SPL. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:12 +00:00
#endif /* CONFIG_SPL_BUILD */
Tegra: Change Tegra20 to Tegra in common code, prep for T30 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-05 00:00:24 +00:00
#endif /* __TEGRA_COMMON_POST_H */
Reference in a new issue Copy permalink