Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/xilinx_versal_virt_defconfig

127 lines
3 KiB
Text
Raw Normal View History

arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_ARM=y
configs: set CONFIG_COUNTER_FREQUENCY Set CONFIG_COUNTER_FREQUENCY according to COUNTER_FREQUENCY in config header file. Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: Re-run migration]
2022-04-13 09:47:20 +00:00
CONFIG_COUNTER_FREQUENCY=100000000
arm64: versal: Generate position-independent pre-relocation code Enable position independent pre-relocation to let users options to put u-boot to different locations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-08 11:36:47 +00:00
CONFIG_POSITION_INDEPENDENT=y
xilinx: versal: Enable CONFIG_POSITION_INDEPENDENT U-Boot expects to be linked to a specific hard-coded address and to be loaded to and run from that address. CONFIG_POSITION_INDEPENDENT config lifts that restriction & allowing the code to be loaded to and executed from almost any address. As we enabled CONFIG_POSITION_INDEPENDENT, CONFIG_INIT_SP_RELATIVE is enabled by default, where it will set the early stack pointer at runtime by adding an offset value to &_bss_start. The offset value is taken from SYS_INIT_SP_BSS_OFFSET. SYS_INIT_SP_BSS_OFFSET offset should be large enough so that the early malloc region, global data (gd), and early stack should fit. With commit d8fabcc424bd ("arm64: versal: Increase SYS_MALLOC_F_LEN") SYS_MALLOC_F_LEN is increased from 32KB to 1MB, so we need to accommodate this space with SYS_INIT_SP_BSS_OFFSET. Hence increasing SYS_INIT_SP_BSS_OFFSET to 1.5MB. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-12 05:39:16 +00:00
CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_ARCH_VERSAL=y
CONFIG_SYS_TEXT_BASE=0x8000000
arm64: versal: Increase SYS_MALLOC_F_LEN This patch increases SYS_MALLOC_F_LEN as the versal clock driver needs to be probed before relocation itself inorder to get required clocks before relocation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-02 11:14:17 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x100000
arm: xilinx_versal_virt: Add a devicetree file Add an empty file to prevent build errors when building with CONFIG_OF_SEPARATE enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:17 +00:00
CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-virt"
xilinx: Enable FRU command for all ARM based platforms Enable it by default for board detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-22 08:33:29 +00:00
CONFIG_CMD_FRU=y
arm64: versal: Enable config to map TCM and OCM Enable CONFIG_DEFINE_TCM_OCM_MMAP to map TCM and OCM memory. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-01 05:44:22 +00:00
CONFIG_DEFINE_TCM_OCM_MMAP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0x8000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 14:33:18 +00:00
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
configs: versal: Add CONFIG_DISTRO_DEFAULTS to versal defconfig Add DISTRO_DEFAULTS config to versal virt defconfig file which is suitable for booting general purpose Linux distributions. Remove other configs which are selected by default by DISTRO_DEFAULTS configuration. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-14 05:26:56 +00:00
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_REMAKE_ELF to Kconfig This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-29 15:25:30 +00:00
CONFIG_REMAKE_ELF=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
xilinx: Disable ARCH_FIXUP_FDT_MEMORY Based on DT spec you can have one memory node which multiple ranges or multiple nodes. fdt_fixup_memory_banks() is not implemented in a correct way when multiple memory nodes are present because all ranges are put it to the first memory node found. And next memory nodes are kept in DT which ends up in the same range specification in the same DT. Here is what it is happening. Origin DT. memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; memory@800000000 { device_type = "memory"; reg = <0x8 0x00000000 0x0 0x80000000>; }; After fdt_fixup_memory_banks() memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; memory@800000000 { device_type = "memory"; reg = <0x8 0x00000000 0x0 0x80000000>; }; As is visible memory@0 node got second range but there is still memory@800000000 node present and 2G range is listed twice. The solution can't be that second node is removed because it can be referenced already that's why it is better for us to disable this option for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 12:09:32 +00:00
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
arm64: versal: Update boot delay to perform autoboot Update boot delay to 5 for performing autoboot. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-27 05:47:04 +00:00
CONFIG_BOOTDELAY=5
xilinx: Enable preboot feature for ZynqMP and Versal Enable preboot functionality for ZynqMP and Versal platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-18 12:15:01 +00:00
CONFIG_USE_PREBOOT=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_BOARD_EARLY_INIT_R=y
Convert CONFIG_CLOCKS to Kconfig This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-23 21:20:08 +00:00
CONFIG_CLOCKS=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_SYS_PROMPT="Versal> "
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=64
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=2073
Convert CONFIG_SYS_BOOTM_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 23:29:46 +00:00
CONFIG_SYS_BOOTM_LEN=0x6400000
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_BOOTMENU=y
xilinx: Enable GUID partitions and EFI variable commands For work with EFI it is good to have GUID partitions enabled and also option to work with UEFI variables. That's why enable both. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-01 10:35:42 +00:00
CONFIG_CMD_NVEDIT_EFI=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
arm64: versal: Enable CLK command Enables clock command for dumping clocks. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-23 06:54:59 +00:00
CONFIG_CMD_CLK=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_CMD_DFU=y
arm64: versal: Enable dm command It is useful to have this command enable to see which devices are bind/probed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-16 15:52:19 +00:00
CONFIG_CMD_DM=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
# CONFIG_CMD_FLASH is not set
arm64: versal: Enable GPIO command for Versal Enable GPIO command for Xilinx Versal platform. Driver is updated that's why it can be used directly. Driver is enabled by default through Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 07:46:47 +00:00
CONFIG_CMD_GPIO=y
arm64: versal: Enable i2c cadence controller and i2c command Enable communication over i2c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-16 15:50:17 +00:00
CONFIG_CMD_I2C=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_MMC=y
configs: xilinx: Enable configs required for ubifs Enable required configs for using ubifs in uboot. UBIFS testing procedure from u-boot: Let's say we have two partitions in dt as below and want to format partition1 "images" with ubifs. partition@0 { label = "boot"; reg = <0x0 0x1000000>; }; partition@1 { label = "images"; reg = <0x1000000 0x7000000>; }; We will format the partition from linux and copy some files and access from uboot later. First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. this is required as ubifs expects min LEB size as 15*1024 bytes. Use below commands in linux to format "images" partition with ubifs. ubiformat /dev/mtd1 ubiattach /dev/ubi_ctrl -m 1 ubimkvol /dev/ubi0 -N images -m mount -t ubifs ubi0:images /mnt We can copy files to /mnt and unmount it. To access this ubifs partition from uboot, run below commands. (Don't forget to probe device before, e.g. sf probe 0 0 0) setenv mtdids "nor0=nor0" setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)" ubi part images ubifsmount ubi0:images make sure we match "mtdparts" to whatever is given in dt w.r.t partition sizes. "mtdparts" command will list the mtd partitions in u-boot. Once ubifs is mounted, we can use "ubifsls" to list the files in that partition and use "ubifsload <addr> <filename>" to load files from ubifs partition to DDR. Reading information about mtd layout from DT is not supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20 10:51:38 +00:00
CONFIG_CMD_MTD=y
xilinx: Enable SF_TEST command for all ARM based platforms Enable this command by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-22 08:34:43 +00:00
CONFIG_CMD_SF_TEST=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_CMD_USB=y
Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:50 +00:00
CONFIG_BOOTP_MAY_FAIL=y
CONFIG_BOOTP_BOOTFILESIZE=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
xilinx: Enable efi debug command Enable EFI debug command to be able to setup various efi variables to avoid software like grub. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-26 10:16:24 +00:00
CONFIG_CMD_EFIDEBUG=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
xilinx: Enable support for SquashFS Enable SquashFS for all xilinx platforms. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dbe85afda8cd90ebfc537979d382808ff9bec160.1655982259.git.michal.simek@amd.com
2022-06-23 11:04:21 +00:00
CONFIG_CMD_SQUASHFS=y
configs: xilinx: Enable configs required for ubifs Enable required configs for using ubifs in uboot. UBIFS testing procedure from u-boot: Let's say we have two partitions in dt as below and want to format partition1 "images" with ubifs. partition@0 { label = "boot"; reg = <0x0 0x1000000>; }; partition@1 { label = "images"; reg = <0x1000000 0x7000000>; }; We will format the partition from linux and copy some files and access from uboot later. First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. this is required as ubifs expects min LEB size as 15*1024 bytes. Use below commands in linux to format "images" partition with ubifs. ubiformat /dev/mtd1 ubiattach /dev/ubi_ctrl -m 1 ubimkvol /dev/ubi0 -N images -m mount -t ubifs ubi0:images /mnt We can copy files to /mnt and unmount it. To access this ubifs partition from uboot, run below commands. (Don't forget to probe device before, e.g. sf probe 0 0 0) setenv mtdids "nor0=nor0" setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)" ubi part images ubifsmount ubi0:images make sure we match "mtdparts" to whatever is given in dt w.r.t partition sizes. "mtdparts" command will list the mtd partitions in u-boot. Once ubifs is mounted, we can use "ubifsls" to list the files in that partition and use "ubifsload <addr> <filename>" to load files from ubifs partition to DDR. Reading information about mtd layout from DT is not supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20 10:51:38 +00:00
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
xilinx: Enable GUID partitions and EFI variable commands For work with EFI it is good to have GUID partitions enabled and also option to work with UEFI variables. That's why enable both. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-01 10:35:42 +00:00
CONFIG_PARTITION_TYPE_GUID=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_OF_BOARD=y
xilinx: versal: Add support for saving env based on bootmode Enable saving variables to MMC(FAT) and SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal platforms as well. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23 15:07:46 +00:00
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
xilinx: Enable redundant variable handling Enable this feature by default to be able to work with env import/export commands which are done in this slightly changed variable format (There is addtional flag fields in variable file which is changing CRC calculation). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-24 09:44:20 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
arm64: zynqmp: Enable netconsole for ZynqMP It is nice feature Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-18 08:19:02 +00:00
CONFIG_NETCONSOLE=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:14 +00:00
CONFIG_IP_DEFRAG=y
Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:38:21 +00:00
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs, headers and whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:15 +00:00
CONFIG_TFTP_BLOCKSIZE=4096
arm64: versal: Enable clock driver Enable clock driver for Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-04 11:58:47 +00:00
CONFIG_CLK_VERSAL=y
xilinx: Enable DFU_TIMEOUT config Enable CONFIG_DFU_TIMEOUT to set timeout waiting for dfu command. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-31 05:24:59 +00:00
CONFIG_DFU_TIMEOUT=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_DFU_RAM=y
usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-01 11:21:47 +00:00
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000
arm64: versal: Enable bit stream loading support for versal platform. This patch enables bitstream loading support for Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-05 10:25:00 +00:00
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_VERSALPL=y
arm64: versal: Enable i2c cadence controller and i2c command Enable communication over i2c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-16 15:50:17 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_MISC=y
xilinx: versal: Enable i2c misc eeprom driver Enable this driver to be able to work with i2c based eeproms on Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-03 13:14:24 +00:00
CONFIG_I2C_EEPROM=y
arm64: zynqmp: Enable EMMC boot Enable EMMC boot commands to be able to change EMMC setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-29 10:38:17 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
arm64: versal: Enable UHS support This patch enables UHS support for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-07 07:33:18 +00:00
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
arm64: versal: Enable UHS support This patch enables UHS support for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-07 07:33:18 +00:00
CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD MTD must be enabled when there is a SPI NOR flash using the SPI_FLASH_MTD config entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:08 +00:00
CONFIG_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 22:18:38 +00:00
CONFIG_DM_SPI_FLASH=y
arm64: versal: Enable support for Gigadevice/ISSI flashes Enable support for Gigadevice/ISSI flash parts for Versal platform. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-17 11:49:40 +00:00
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
configs: xilinx: Enable configs required for ubifs Enable required configs for using ubifs in uboot. UBIFS testing procedure from u-boot: Let's say we have two partitions in dt as below and want to format partition1 "images" with ubifs. partition@0 { label = "boot"; reg = <0x0 0x1000000>; }; partition@1 { label = "images"; reg = <0x1000000 0x7000000>; }; We will format the partition from linux and copy some files and access from uboot later. First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. this is required as ubifs expects min LEB size as 15*1024 bytes. Use below commands in linux to format "images" partition with ubifs. ubiformat /dev/mtd1 ubiattach /dev/ubi_ctrl -m 1 ubimkvol /dev/ubi0 -N images -m mount -t ubifs ubi0:images /mnt We can copy files to /mnt and unmount it. To access this ubifs partition from uboot, run below commands. (Don't forget to probe device before, e.g. sf probe 0 0 0) setenv mtdids "nor0=nor0" setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)" ubi part images ubifsmount ubi0:images make sure we match "mtdparts" to whatever is given in dt w.r.t partition sizes. "mtdparts" command will list the mtd partitions in u-boot. Once ubifs is mounted, we can use "ubifsls" to list the files in that partition and use "ubifsload <addr> <filename>" to load files from ubifs partition to DDR. Reading information about mtd layout from DT is not supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20 10:51:38 +00:00
CONFIG_SPI_FLASH_MTD=y
arm64: versal: Enable different ethernet phy for virt platform This platform is going to become generic that's why it is necessary also enable different PHY vendors. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-17 08:22:37 +00:00
CONFIG_PHY_MARVELL=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
net: phy: Add support for TI PHY init ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-05-04 21:14:39 +00:00
CONFIG_PHY_TI_DP83867=y
arm64: versal: Enable different ethernet phy for virt platform This platform is going to become generic that's why it is necessary also enable different PHY vendors. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-17 08:22:37 +00:00
CONFIG_PHY_VITESSE=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_PHY_FIXED=y
xilinx: Add CONFIG_DM_ETH_PHY config Enable CONFIG_DM_ETH_PHY to utilize shared MDIO bus support on all xilinx platforms. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/965981eb324d13a98aad8bd88eb8b50bc5147a7e.1652181968.git.michal.simek@amd.com
2022-05-10 11:26:11 +00:00
CONFIG_DM_ETH_PHY=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_PHY_GIGE=y
xilinx: versal: Enable AXI ethernet driver Enable AXI ethernet driver for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-13 09:42:56 +00:00
CONFIG_XILINX_AXIEMAC=y
xilinx: versal: Enable Xilinx AXI MRMAC Enable Xilinx AXI MRMAC for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-02 10:40:35 +00:00
CONFIG_XILINX_AXIMRMAC=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_ZYNQ_GEM=y
serial: Convert ARM_DCC to Kconfig The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-02 21:26:33 +00:00
CONFIG_ARM_DCC=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_PL01X_SERIAL=y
xilinx: Enable uartlite driver for Versal/ZynqMP Add CONFIG_XILINX_UARTLITE config to versal/zynqmp defconfig to enable uartlite driver support by default. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-14 09:02:17 +00:00
CONFIG_XILINX_UARTLITE=y
soc: xilinx: versal: Add soc_xilinx_versal driver soc_xilinx_versal driver allows identification of family & revision of versal SoC. This driver is selected by CONFIG_SOC_XILINX_VERSAL. Probe this driver using platdata U_BOOT_DEVICE structure which is defined at mach-versal/cpu.c. Add this config to xilinx_versal_virt_defconfig & xilinx_versal_mini_ospi_defconfig file to select this driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-10 12:50:19 +00:00
CONFIG_SOC_XILINX_VERSAL=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
arm64: versal: Add versal specific cadence ospi driver Add support for cadence ospi driver for Versal platform. This driver provides support for DMA read operation which utilizes cadence qspi driver. If "cdns,is-dma" DT property is specified use dma for read operation from cadence_qspi driver. As cadence_qspi_apb_dma_read() is defined in cadence_ospi_versal driver add a weak function defination in cadence_qspi driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-3-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-05-12 10:05:32 +00:00
CONFIG_CADENCE_QSPI=y
CONFIG_CADENCE_OSPI_VERSAL=y
xilinx: Enable SPI driver for Versal Enable Zynq SPI driver for Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 09:04:17 +00:00
CONFIG_ZYNQ_SPI=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_THOR=y
arm64: versal: Enable LIBFDT_OVERLAY Enable device tree overlay to build all dtbs for Versal with -@ flag to enable applying overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-07 08:33:23 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink