u-boot/include/configs/udoo.h

69 lines
1.7 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* Configuration settings for Udoo board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "mx6_common.h"
#include "imx6_spl.h"
#define CONFIG_MXC_UART_BASE UART2_BASE
/* SATA Configs */
#define CONFIG_LBA48
/* MMC Configuration */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc1,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdtfile=undefined\0" \
"fdt_addr=0x18000000\0" \
"fdt_addr_r=0x18000000\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcrootfstype=ext4\0" \
"findfdt="\
"if test ${board_rev} = MX6Q; then " \
"setenv fdtfile imx6q-udoo.dtb; fi; " \
"if test ${board_rev} = MX6DL; then " \
"setenv fdtfile imx6dl-udoo.dtb; fi; " \
"if test ${fdtfile} = undefined; then " \
"echo WARNING: Could not determine dtb to use; fi\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"ramdisk_addr_r=0x13000000\0" \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(SATA, sata, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#include <linux/stringify.h>
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
#endif /* __CONFIG_H * */