Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 07:31:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/radxa-cm3-io-rk3566_defconfig

85 lines
2.2 KiB
Text
Raw Normal View History

board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00a00000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
CONFIG_DEFAULT_DEVICE_TREE="rk3566-radxa-cm3-io"
CONFIG_ROCKCHIP_RK3568=y
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_DEBUG_UART_BASE=0xFE660000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
rockchip: rk3566-radxa-cm3-io: Update defconfig Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add missing supported mmc modes to sdhci node. Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load next stage from a FIT image and then jump to next stage not back to BootRom. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded to 0x40000, use the space in between as SPL_MAX_SIZE. Add config option to include useful gpio cmd. Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is set based on cpuid read from OTP. Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS, U-Boot proper will read and configure assigned-clock props. Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 18:26:30 +00:00
CONFIG_SPL_FIT_SIGNATURE=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_SPL_LOAD_FIT=y
rockchip: Restore support for boot scripts in legacy image format Use of CONFIG_SPL_FIT_SIGNATURE=y cause CONFIG_LEGACY_IMAGE_FORMAT=n as default, this prevent boot scripts in legacy image format from working and was an unintended change in the listed fixes commits: Wrong image format for "source" command Add CONFIG_LEGACY_IMAGE_FORMAT=y to defconfig for affected boards to restore support for boot scripts in legacy image format. Fixes: 3bf8e4080763 ("board: rockchip: add Radxa ROCK5B Rk3588 board") Fixes: cf777572ca31 ("rockchip: rockpro64: Use SDMA to boost eMMC performance") Fixes: 6e2b8344d60c ("rockchip: rock-pi-4: Use SDMA to boost eMMC performance") Fixes: 1bf49d5a4a7c ("rockchip: rk3566-radxa-cm3-io: Update defconfig") Fixes: 703c170b40f2 ("rockchip: rk3568-evb: Update defconfig") Fixes: 68000f750acd ("rockchip: rk3568-rock-3a: Update defconfig") Fixes: 6fb02589a608 ("rockchip: rk3588-evb: Update defconfig") Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-06-26 19:43:06 +00:00
CONFIG_LEGACY_IMAGE_FORMAT=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-cm3-io.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
rockchip: rk3566-radxa-cm3-io: Update defconfig Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add missing supported mmc modes to sdhci node. Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load next stage from a FIT image and then jump to next stage not back to BootRom. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded to 0x40000, use the space in between as SPL_MAX_SIZE. Add config option to include useful gpio cmd. Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is set based on cpuid read from OTP. Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS, U-Boot proper will read and configure assigned-clock props. Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 18:26:30 +00:00
CONFIG_SPL_MAX_SIZE=0x40000
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x4000000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_ATF=y
rockchip: rk3566-radxa-cm3-io: Update defconfig Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add missing supported mmc modes to sdhci node. Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load next stage from a FIT image and then jump to next stage not back to BootRom. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded to 0x40000, use the space in between as SPL_MAX_SIZE. Add config option to include useful gpio cmd. Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is set based on cpuid read from OTP. Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS, U-Boot proper will read and configure assigned-clock props. Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 18:26:30 +00:00
CONFIG_CMD_GPIO=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_CMD_GPT=y
configs: rockchip: radxa-cm3-io, rock-3a: enable commands for i2c/pmic/regulator enable commands for i2c/pmic/regulator and relevant configs. also drop configs for unused regulators. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-20 12:00:39 +00:00
CONFIG_CMD_I2C=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_CMD_MMC=y
rk3566: radxa-cm3: Enable USB2.0, USB3.0 support => usb start starting USB... Bus usb@fd000000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fd800000: USB EHCI 1.00 scanning bus usb@fd000000 for devices... cannot reset port 1!? 2 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found => usb tree USB device tree: 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub | +-3 Mass Storage (480 Mb/s, 500mA) | JetFlash Mass Storage Device 19M7I4ZQFTSC08SU | +-4 Human Interface (12 Mb/s, 98mA) Logitech USB Receiver Co-developed-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-17 11:58:45 +00:00
CONFIG_CMD_USB=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
# CONFIG_CMD_SETEXPR is not set
configs: rockchip: radxa-cm3-io, rock-3a: enable commands for i2c/pmic/regulator enable commands for i2c/pmic/regulator and relevant configs. also drop configs for unused regulators. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-20 12:00:39 +00:00
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
rockchip: rk3566-radxa-cm3-io: Use pinctrl for sdmmc and sdhci in SPL Enable pinctrl for sdmmc and sdhci in SPL to support loading of FIT image from SD and eMMC storage when booting from SPI NOR flash. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 18:26:31 +00:00
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
configs: rockchip: Enable ethernet driver on RK356x boards Enable DWC_ETH_QOS_ROCKCHIP and related PHY driver on RK356x boards that have an enabled gmac node. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-01 19:17:21 +00:00
CONFIG_SPL_DM_SEQ_ALIAS=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
configs: rockchip: Enable ethernet driver on RK356x boards Enable DWC_ETH_QOS_ROCKCHIP and related PHY driver on RK356x boards that have an enabled gmac node. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-01 19:17:21 +00:00
CONFIG_PHY_REALTEK=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
rk3566: radxa-cm3: Enable USB2.0, USB3.0 support => usb start starting USB... Bus usb@fd000000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fd800000: USB EHCI 1.00 scanning bus usb@fd000000 for devices... cannot reset port 1!? 2 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found => usb tree USB device tree: 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub | +-3 Mass Storage (480 Mb/s, 500mA) | JetFlash Mass Storage Device 19M7I4ZQFTSC08SU | +-4 Human Interface (12 Mb/s, 98mA) Logitech USB Receiver Co-developed-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-17 11:58:45 +00:00
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
rockchip: rk3566-radxa-cm3-io: Use pinctrl for sdmmc and sdhci in SPL Enable pinctrl for sdmmc and sdhci in SPL to support loading of FIT image from SD and eMMC storage when booting from SPI NOR flash. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 18:26:31 +00:00
CONFIG_SPL_PINCTRL=y
configs: rockchip: radxa-cm3-io, rock-3a: enable commands for i2c/pmic/regulator enable commands for i2c/pmic/regulator and relevant configs. also drop configs for unused regulators. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-20 12:00:39 +00:00
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_RK8XX=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
rockchip: rk3566-radxa-cm3-io: Update defconfig Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add missing supported mmc modes to sdhci node. Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load next stage from a FIT image and then jump to next stage not back to BootRom. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded to 0x40000, use the space in between as SPL_MAX_SIZE. Add config option to include useful gpio cmd. Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is set based on cpuid read from OTP. Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS, U-Boot proper will read and configure assigned-clock props. Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 18:26:30 +00:00
CONFIG_SYS_NS16550_MEM32=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_SYSRESET=y
rk3566: radxa-cm3: Enable USB2.0, USB3.0 support => usb start starting USB... Bus usb@fd000000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fd800000: USB EHCI 1.00 scanning bus usb@fd000000 for devices... cannot reset port 1!? 2 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found => usb tree USB device tree: 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub | +-3 Mass Storage (480 Mb/s, 500mA) | JetFlash Mass Storage Device 19M7I4ZQFTSC08SU | +-4 Human Interface (12 Mb/s, 98mA) Logitech USB Receiver Co-developed-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-17 11:58:45 +00:00
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_DWC3=y
rockchip: rk3568: Use dwc3-generic driver Change RK3568 devices to use the newer dwc3-generic driver instead of the old xhci-dwc3 driver for USB 3.0 support. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-30 22:59:59 +00:00
CONFIG_USB_DWC3_GENERIC=y
board: rockchip: Add Radxa Compute Module 3 IO Board Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-17 11:58:38 +00:00
CONFIG_ERRNO_STR=y
Reference in a new issue Copy permalink