u-boot/board/samsung/smdk2410/smdk2410.c

140 lines
2.9 KiB
C
Raw Normal View History

2002-11-03 00:24:07 +00:00
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002, 2010
2002-11-03 00:24:07 +00:00
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* SPDX-License-Identifier: GPL-2.0+
2002-11-03 00:24:07 +00:00
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/s3c24x0_cpu.h>
2002-11-03 00:24:07 +00:00
DECLARE_GLOBAL_DATA_PTR;
2002-11-03 00:24:07 +00:00
#define FCLK_SPEED 1
#if (FCLK_SPEED == 0) /* Fout = 203MHz, Fin = 12MHz for Audio */
2002-11-03 00:24:07 +00:00
#define M_MDIV 0xC3
#define M_PDIV 0x4
#define M_SDIV 0x1
#elif (FCLK_SPEED == 1) /* Fout = 202.8MHz */
2002-11-03 00:24:07 +00:00
#define M_MDIV 0xA1
#define M_PDIV 0x3
#define M_SDIV 0x1
#endif
#define USB_CLOCK 1
#if (USB_CLOCK == 0)
2002-11-03 00:24:07 +00:00
#define U_M_MDIV 0xA1
#define U_M_PDIV 0x3
#define U_M_SDIV 0x1
#elif (USB_CLOCK == 1)
2002-11-03 00:24:07 +00:00
#define U_M_MDIV 0x48
#define U_M_PDIV 0x3
#define U_M_SDIV 0x2
#endif
static inline void pll_delay(unsigned long loops)
2002-11-03 00:24:07 +00:00
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b" : "=r" (loops) : "0" (loops));
2002-11-03 00:24:07 +00:00
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_early_init_f(void)
2002-11-03 00:24:07 +00:00
{
struct s3c24x0_clock_power * const clk_power =
s3c24x0_get_base_clock_power();
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
2002-11-03 00:24:07 +00:00
/* to reduce PLL lock time, adjust the LOCKTIME register */
writel(0xFFFFFF, &clk_power->locktime);
2002-11-03 00:24:07 +00:00
/* configure MPLL */
writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
&clk_power->mpllcon);
2002-11-03 00:24:07 +00:00
/* some delay between MPLL and UPLL */
pll_delay(4000);
2002-11-03 00:24:07 +00:00
/* configure UPLL */
writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
&clk_power->upllcon);
2002-11-03 00:24:07 +00:00
/* some delay between MPLL and UPLL */
pll_delay(8000);
2002-11-03 00:24:07 +00:00
/* set up the I/O ports */
writel(0x007FFFFF, &gpio->gpacon);
writel(0x00044555, &gpio->gpbcon);
writel(0x000007FF, &gpio->gpbup);
writel(0xAAAAAAAA, &gpio->gpccon);
writel(0x0000FFFF, &gpio->gpcup);
writel(0xAAAAAAAA, &gpio->gpdcon);
writel(0x0000FFFF, &gpio->gpdup);
writel(0xAAAAAAAA, &gpio->gpecon);
writel(0x0000FFFF, &gpio->gpeup);
writel(0x000055AA, &gpio->gpfcon);
writel(0x000000FF, &gpio->gpfup);
writel(0xFF95FFBA, &gpio->gpgcon);
writel(0x0000FFFF, &gpio->gpgup);
writel(0x002AFAAA, &gpio->gphcon);
writel(0x000007FF, &gpio->gphup);
return 0;
}
2002-11-03 00:24:07 +00:00
int board_init(void)
{
2002-11-03 00:24:07 +00:00
/* arch number of SMDK2410-Board */
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
2002-11-03 00:24:07 +00:00
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x30000100;
icache_enable();
dcache_enable();
return 0;
}
int dram_init(void)
2002-11-03 00:24:07 +00:00
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = PHYS_SDRAM_1_SIZE;
2002-11-03 00:24:07 +00:00
return 0;
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_CS8900
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
return rc;
}
#endif
/*
* Hardcoded flash setup:
* Flash 0 is a non-CFI AMD AM29LV800BB flash.
*/
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
info->portwidth = FLASH_CFI_16BIT;
info->chipwidth = FLASH_CFI_BY16;
info->interface = FLASH_CFI_X16;
return 1;
}