u-boot/include/configs/tegra30-common.h

62 lines
2 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*/
#ifndef _TEGRA30_COMMON_H_
#define _TEGRA30_COMMON_H_
#include "tegra-common.h"
/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
/*
* Miscellaneous configurable options
*/
#define CONFIG_STACKBASE 0x83800000 /* 56MB */
/*
* Memory layout for where various images get loaded by boot scripts:
*
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* pxefile_addr_r can be pretty much anywhere that doesn't conflict with
* something else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
* should not overlap that area, or the kernel will have to copy itself
* somewhere else before decompression. Similarly, the address of any other
* data passed to the kernel shouldn't overlap the start of RAM. Pushing
* this up to 32M allows for a sizable kernel to be decompressed below the
* compressed load address.
*
* fdt_addr_r simply shouldn't overlap anything else. Choosing 48M allows for
* the compressed kernel to be up to 32M too.
*
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization As best I can tell, CONFIG_SYS_LOAD_ADDR and CONFIG_LOADADDR/$loadaddr serve essentially the same purpose. Roughly, if a command takes a load address, then CONFIG_SYS_LOAD_ADDR or $loadaddr (or both) are the default if the command-line does not specify the address. Different U-Boot commands are inconsistent re: which of the two default values they use. As such, set the two to the same value, and move the logic that does this into tegra-common-post.h so it's not duplicated. A number of other non- Tegra boards do this too. The values chosen for these macros are no longer consistent with anything in MEM_LAYOUT_ENV_SETTINGS. Regain consistency by setting $kernel_addr_r to CONFIG_LOADADDR. Older scripts tend to use $loadaddr for the default kernel load address, whereas newer scripts and features tend to use $kernel_addr_r, along with other variables for other purposes such as DTBs and initrds. Hence, it's logical they should share the same value. I had originally thought to make the $kernel_addr_r and CONFIG_LOADADDR have different values. This would guarantee no interference if a script used the two variables for different purposes. However, that scenario is unlikely given the semantic meaning associated with the two variables. The lowest available value is 0x90200000; see comments for MEM_LAYOUT_ENV_SETTINGS in tegra30-common-post.h for details. However, that value would be problematic for a script that loaded a raw zImage to $loadaddr, since it's more than 128MB beyond the start of SDRAM, which would interfere with the kernel's CONFIG_AUTO_ZRELADDR. So, let's not do that. The only potential fallout I could foresee from this patch is if someone has a script that loads the kernel to $loadaddr, but some other file (DTB, initrd) to a hard-coded address that the new value of $loadaddr interferes with. This seems unlikely. A user should not do that; they should either hard-code all load addresses, or use U-Boot-supplied variables for all load addresses. Equally, any fallout due to this change is trivial to fix; simply modify the load addresses in that script. Cc: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Paul Walmsley <pwalmsley@nvidia.com> Reviewed-by: Simon Glass Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-04-01 21:40:53 +00:00
#define CONFIG_LOADADDR 0x81000000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization As best I can tell, CONFIG_SYS_LOAD_ADDR and CONFIG_LOADADDR/$loadaddr serve essentially the same purpose. Roughly, if a command takes a load address, then CONFIG_SYS_LOAD_ADDR or $loadaddr (or both) are the default if the command-line does not specify the address. Different U-Boot commands are inconsistent re: which of the two default values they use. As such, set the two to the same value, and move the logic that does this into tegra-common-post.h so it's not duplicated. A number of other non- Tegra boards do this too. The values chosen for these macros are no longer consistent with anything in MEM_LAYOUT_ENV_SETTINGS. Regain consistency by setting $kernel_addr_r to CONFIG_LOADADDR. Older scripts tend to use $loadaddr for the default kernel load address, whereas newer scripts and features tend to use $kernel_addr_r, along with other variables for other purposes such as DTBs and initrds. Hence, it's logical they should share the same value. I had originally thought to make the $kernel_addr_r and CONFIG_LOADADDR have different values. This would guarantee no interference if a script used the two variables for different purposes. However, that scenario is unlikely given the semantic meaning associated with the two variables. The lowest available value is 0x90200000; see comments for MEM_LAYOUT_ENV_SETTINGS in tegra30-common-post.h for details. However, that value would be problematic for a script that loaded a raw zImage to $loadaddr, since it's more than 128MB beyond the start of SDRAM, which would interfere with the kernel's CONFIG_AUTO_ZRELADDR. So, let's not do that. The only potential fallout I could foresee from this patch is if someone has a script that loads the kernel to $loadaddr, but some other file (DTB, initrd) to a hard-coded address that the new value of $loadaddr interferes with. This seems unlikely. A user should not do that; they should either hard-code all load addresses, or use U-Boot-supplied variables for all load addresses. Equally, any fallout due to this change is trivial to fix; simply modify the load addresses in that script. Cc: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Paul Walmsley <pwalmsley@nvidia.com> Reviewed-by: Simon Glass Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-04-01 21:40:53 +00:00
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83100000\0"
/* Defines for SPL */
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#endif /* _TEGRA30_COMMON_H_ */