u-boot/board/tplink/wdr4300/wdr4300.c

85 lines
1.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <init.h>
#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/types.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <mach/ath79.h>
#include <mach/ar71xx_regs.h>
#include <mach/ddr.h>
#include <debug_uart.h>
#ifdef CONFIG_USB_HOST
static void wdr4300_usb_start(void)
{
void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE,
AR71XX_GPIO_SIZE, MAP_NOCACHE);
if (!gpio_regs)
return;
/* Power up the USB HUB. */
clrbits_be32(gpio_regs + AR71XX_GPIO_REG_OE, BIT(21) | BIT(22));
writel(BIT(21) | BIT(22), gpio_regs + AR71XX_GPIO_REG_SET);
mdelay(1);
ath79_usb_reset();
}
#else
static inline void wdr4300_usb_start(void) {}
#endif
void wdr4300_pinmux_config(void)
{
void __iomem *regs;
regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
MAP_NOCACHE);
/* Assure JTAG is not disconnected. */
writel(0x40, regs + AR934X_GPIO_REG_FUNC);
/* Configure default GPIO input/output regs. */
writel(0x3031b, regs + AR71XX_GPIO_REG_OE);
writel(0x0f804, regs + AR71XX_GPIO_REG_OUT);
/* Configure pin multiplexing. */
writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0);
writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1);
writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2);
writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4);
writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5);
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
wdr4300_pinmux_config();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
#ifndef CONFIG_DEBUG_UART_BOARD_INIT
wdr4300_pinmux_config();
#endif
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
ar934x_pll_init(560, 480, 240);
ar934x_ddr_init(560, 480, 240);
#endif
wdr4300_usb_start();
ath79_eth_reset();
return 0;
}
#endif