u-boot/board/freescale/imx8mp_evk/Kconfig

if TARGET_IMX8MP_EVK

config SYS_BOARD
	default "imx8mp_evk"

config SYS_VENDOR
	default "freescale"

config SYS_CONFIG_NAME
	default "imx8mp_evk"

config IMX_CONFIG
	default "board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg"

source "board/freescale/common/Kconfig"

endif
imx: add i.MX8MP EVK board Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com> 2019-12-30 17:46:21 +08:00			`if TARGET_IMX8MP_EVK`

			`config SYS_BOARD`
			`default "imx8mp_evk"`

			`config SYS_VENDOR`
			`default "freescale"`

			`config SYS_CONFIG_NAME`
			`default "imx8mp_evk"`

imx: Finish migration of IMX_CONFIG to Kconfig - Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-24 20:41:00 -04:00			`config IMX_CONFIG`
			`default "board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg"`

imx: add i.MX8MP EVK board Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com> 2019-12-30 17:46:21 +08:00			`source "board/freescale/common/Kconfig"`

			`endif`