Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 14:23:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/octeon_ebb7304_defconfig

98 lines
2.2 KiB
Text
Raw Normal View History

mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_MIPS=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0xffffffff80000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x1000000
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x4000
mips: octeon: Update EBB7304 defconfig This patch enables the following options for the Octeon EBB7304 EVB: - PCI & DM_PCI - DM_SPI_FLASH & SPI flash device support - SPI & Octeon SPI driver - GPIO cmd support - I2C cmd support Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-30 11:56:22 +00:00
CONFIG_NR_DRAM_BANKS=2
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_ENV_SIZE=0x2000
mips: octeon: octeon_ebb7304_defconfig: Fix CFI flash setup This patch makes the necessary adjustments in the defconfig to fully support the CFI flash on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-26 14:43:18 +00:00
CONFIG_ENV_SECT_SIZE=0x2000
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_DEBUG_UART_BASE=0x8001180000000800
CONFIG_DEBUG_UART_CLOCK=1200000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
CONFIG_ENV_ADDR=0x800000001FBFE000
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_ARCH_OCTEON=y
# CONFIG_MIPS_CACHE_SETUP is not set
# CONFIG_MIPS_CACHE_DISABLE is not set
mips: octeon: ebb7304: Add support for some I2C devices This patch adds support for the following I2C devices connected to I2C bus 0 on the Octeon EBB7304: - Dallas DS1337 RTC - TLV EEPROM Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-07 07:12:40 +00:00
CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_PCI=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_DEBUG_UART=y
mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000 This patch changes the MIPS Octeon defconfig to enable some features for PCIe enablement. This includes CONFIG_BOARD_LATE_INIT to call the board specific serdes init code. With these features enabled, the serdes and PCIe driver including the Intel E1000 driver can be tested on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de>
2020-12-11 16:06:12 +00:00
CONFIG_OF_BOARD_FIXUP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-03 14:26:16 +00:00
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=276
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_SYS_CONSOLE_INFO_QUIET=y
mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000 This patch changes the MIPS Octeon defconfig to enable some features for PCIe enablement. This includes CONFIG_BOARD_LATE_INIT to call the board specific serdes init code. With these features enabled, the serdes and PCIe driver including the Intel E1000 driver can be tested on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de>
2020-12-11 16:06:12 +00:00
CONFIG_BOARD_LATE_INIT=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_HUSH_PARSER=y
mips: octeon: Update EBB7304 defconfig This patch enables the following options for the Octeon EBB7304 EVB: - PCI & DM_PCI - DM_SPI_FLASH & SPI flash device support - SPI & Octeon SPI driver - GPIO cmd support - I2C cmd support Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-30 11:56:22 +00:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
mips: octeon: octeon_ebb7304_defconfig: Enable MMC support Enable MMC support including the regulator support on Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-03-12 08:48:28 +00:00
CONFIG_CMD_MMC=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CMD_MTD=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB support This patch enables USB support with some helpful commands, like fs support. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-24 11:04:43 +00:00
CONFIG_CMD_PART=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CMD_PCI=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB support This patch enables USB support with some helpful commands, like fs support. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-24 11:04:43 +00:00
CONFIG_CMD_USB=y
mips: octeon: octeon_ebb7304_defconfig: Enable watchdog support This patch enables the recently added watchdog support on the MIPS Octeon EBB7304 eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2022-05-11 07:08:48 +00:00
CONFIG_CMD_WDT=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CMD_DHCP=y
mips: octeon: ebb7304: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the EBB7304. Also the PHY autonegotiation timeout is increased, as the default 5 seconds are sometime a bit short. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done Using ethernet-mac-nexus@11800e0000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.243 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 13.2 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:53 +00:00
CONFIG_CMD_MII=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CMD_PING=y
mips: octeon: ebb7304: Add support for some I2C devices This patch adds support for the following I2C devices connected to I2C bus 0 on the Octeon EBB7304: - Dallas DS1337 RTC - TLV EEPROM Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-07 07:12:40 +00:00
CONFIG_CMD_RTC=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CMD_TIME=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB support This patch enables USB support with some helpful commands, like fs support. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-24 11:04:43 +00:00
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support This patch enables USB storage support with the necessary partition support on the MIPS Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2021-02-19 13:02:17 +00:00
CONFIG_AMIGA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_ENV_IS_IN_FLASH=y
mips: octeon: ebb7304: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the EBB7304. Also the PHY autonegotiation timeout is increased, as the default 5 seconds are sometime a bit short. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done Using ethernet-mac-nexus@11800e0000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.243 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 13.2 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:53 +00:00
CONFIG_TFTP_TSIZE=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CLK=y
# CONFIG_INPUT is not set
mips: octeon: octeon_ebb7304_defconfig: Enable MMC support Enable MMC support including the regulator support on Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-03-12 08:48:28 +00:00
CONFIG_MISC=y
CONFIG_MMC=y
CONFIG_MMC_OCTEONTX=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-02 21:42:20 +00:00
CONFIG_FLASH_SHOW_PROGRESS=0
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_CFI_FLASH=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
Convert CONFIG_SYS_FLASH_EMPTY_INFO to Kconfig This converts the following to Kconfig: CONFIG_SYS_FLASH_EMPTY_INFO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-23 17:04:55 +00:00
CONFIG_SYS_FLASH_EMPTY_INFO=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_FLASH_CFI_MTD=y
mips: octeon: octeon_ebb7304_defconfig: Fix CFI flash setup This patch makes the necessary adjustments in the defconfig to fully support the CFI flash on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-26 14:43:18 +00:00
CONFIG_SYS_FLASH_PROTECTION=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_SYS_FLASH_CFI=y
Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-23 17:05:04 +00:00
CONFIG_SYS_MAX_FLASH_SECT=256
mips: octeon: Update EBB7304 defconfig This patch enables the following options for the Octeon EBB7304 EVB: - PCI & DM_PCI - DM_SPI_FLASH & SPI flash device support - SPI & Octeon SPI driver - GPIO cmd support - I2C cmd support Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-30 11:56:22 +00:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
mips: octeon: ebb7304: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the EBB7304. Also the PHY autonegotiation timeout is increased, as the default 5 seconds are sometime a bit short. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done Using ethernet-mac-nexus@11800e0000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.243 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 13.2 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:53 +00:00
CONFIG_PHYLIB=y
CONFIG_PHY_MARVELL=y
CONFIG_DM_MDIO=y
CONFIG_DM_ETH_PHY=y
mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000 This patch changes the MIPS Octeon defconfig to enable some features for PCIe enablement. This includes CONFIG_BOARD_LATE_INIT to call the board specific serdes init code. With these features enabled, the serdes and PCIe driver including the Intel E1000 driver can be tested on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de>
2020-12-11 16:06:12 +00:00
CONFIG_E1000=y
mips: octeon: ebb7304: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the EBB7304. Also the PHY autonegotiation timeout is increased, as the default 5 seconds are sometime a bit short. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done Using ethernet-mac-nexus@11800e0000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.243 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 13.2 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:53 +00:00
CONFIG_NET_OCTEON=y
mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000 This patch changes the MIPS Octeon defconfig to enable some features for PCIe enablement. This includes CONFIG_BOARD_LATE_INIT to call the board specific serdes init code. With these features enabled, the serdes and PCIe driver including the Intel E1000 driver can be tested on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de>
2020-12-11 16:06:12 +00:00
CONFIG_PCIE_OCTEON=y
mips: octeon: octeon_ebb7304_defconfig: Enable MMC support Enable MMC support including the regulator support on Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-03-12 08:48:28 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
mips: octeon: octeon_ebb7304: Add DDR4 support This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: Stefan Roese <sr@denx.de>
2020-09-02 06:29:10 +00:00
CONFIG_RAM=y
CONFIG_RAM_OCTEON=y
CONFIG_RAM_OCTEON_DDR4=y
mips: octeon: ebb7304: Add support for some I2C devices This patch adds support for the following I2C devices connected to I2C bus 0 on the Octeon EBB7304: - Dallas DS1337 RTC - TLV EEPROM Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-07 07:12:40 +00:00
CONFIG_DM_RTC=y
CONFIG_RTC_DS1307=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_DEBUG_UART_SHIFT=3
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_SYS_NS16550=y
mips: octeon: Update EBB7304 defconfig This patch enables the following options for the Octeon EBB7304 EVB: - PCI & DM_PCI - DM_SPI_FLASH & SPI flash device support - SPI & Octeon SPI driver - GPIO cmd support - I2C cmd support Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-30 11:56:22 +00:00
CONFIG_SPI=y
CONFIG_OCTEON_SPI=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_SYSRESET=y
CONFIG_SYSRESET_OCTEON=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB support This patch enables USB support with some helpful commands, like fs support. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-24 11:04:43 +00:00
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support This patch enables USB storage support with the necessary partition support on the MIPS Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2021-02-19 13:02:17 +00:00
CONFIG_USB_STORAGE=y
mips: octeon: octeon_ebb7304_defconfig: Enable USB support This patch enables USB support with some helpful commands, like fs support. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-24 11:04:43 +00:00
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
mips: octeon: octeon_ebb7304_defconfig: Enable watchdog support This patch enables the recently added watchdog support on the MIPS Octeon EBB7304 eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2022-05-11 07:08:48 +00:00
CONFIG_WDT=y
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-06-30 10:08:58 +00:00
CONFIG_HEXDUMP=y
Reference in a new issue Copy permalink