mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
584 lines
14 KiB
Text
584 lines
14 KiB
Text
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
/*
|
||
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||
|
|
*
|
||
|
|
* Based on "omap4.dtsi"
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/bus/ti-sysc.h>
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
#include <dt-bindings/pinctrl/omap.h>
|
||
|
|
#include <dt-bindings/clock/omap5.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
|
||
|
|
compatible = "ti,omap5";
|
||
|
|
interrupt-parent = <&wakeupgen>;
|
||
|
|
chosen { };
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
i2c0 = &i2c1;
|
||
|
|
i2c1 = &i2c2;
|
||
|
|
i2c2 = &i2c3;
|
||
|
|
i2c3 = &i2c4;
|
||
|
|
i2c4 = &i2c5;
|
||
|
|
serial0 = &uart1;
|
||
|
|
serial1 = &uart2;
|
||
|
|
serial2 = &uart3;
|
||
|
|
serial3 = &uart4;
|
||
|
|
serial4 = &uart5;
|
||
|
|
serial5 = &uart6;
|
||
|
|
};
|
||
|
|
|
||
|
|
cpus {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
cpu0: cpu@0 {
|
||
|
|
device_type = "cpu";
|
||
|
|
compatible = "arm,cortex-a15";
|
||
|
|
reg = <0x0>;
|
||
|
|
|
||
|
|
operating-points = <
|
||
|
|
/* kHz uV */
|
||
|
|
1000000 1060000
|
||
|
|
1500000 1250000
|
||
|
|
>;
|
||
|
|
|
||
|
|
clocks = <&dpll_mpu_ck>;
|
||
|
|
clock-names = "cpu";
|
||
|
|
|
||
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
||
|
|
|
||
|
|
/* cooling options */
|
||
|
|
#cooling-cells = <2>; /* min followed by max */
|
||
|
|
};
|
||
|
|
cpu@1 {
|
||
|
|
device_type = "cpu";
|
||
|
|
compatible = "arm,cortex-a15";
|
||
|
|
reg = <0x1>;
|
||
|
|
|
||
|
|
operating-points = <
|
||
|
|
/* kHz uV */
|
||
|
|
1000000 1060000
|
||
|
|
1500000 1250000
|
||
|
|
>;
|
||
|
|
|
||
|
|
clocks = <&dpll_mpu_ck>;
|
||
|
|
clock-names = "cpu";
|
||
|
|
|
||
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
||
|
|
|
||
|
|
/* cooling options */
|
||
|
|
#cooling-cells = <2>; /* min followed by max */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
thermal-zones {
|
||
|
|
#include "omap4-cpu-thermal.dtsi"
|
||
|
|
#include "omap5-gpu-thermal.dtsi"
|
||
|
|
#include "omap5-core-thermal.dtsi"
|
||
|
|
};
|
||
|
|
|
||
|
|
timer {
|
||
|
|
compatible = "arm,armv7-timer";
|
||
|
|
/* PPI secure/nonsecure IRQ */
|
||
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
|
||
|
|
<GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
|
||
|
|
<GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
|
||
|
|
<GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmu {
|
||
|
|
compatible = "arm,cortex-a15-pmu";
|
||
|
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gic: interrupt-controller@48211000 {
|
||
|
|
compatible = "arm,cortex-a15-gic";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
reg = <0 0x48211000 0 0x1000>,
|
||
|
|
<0 0x48212000 0 0x2000>,
|
||
|
|
<0 0x48214000 0 0x2000>,
|
||
|
|
<0 0x48216000 0 0x2000>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wakeupgen: interrupt-controller@48281000 {
|
||
|
|
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
reg = <0 0x48281000 0 0x1000>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The soc node represents the soc top level view. It is used for IPs
|
||
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
||
|
|
*/
|
||
|
|
soc {
|
||
|
|
compatible = "ti,omap-infra";
|
||
|
|
mpu {
|
||
|
|
compatible = "ti,omap4-mpu";
|
||
|
|
ti,hwmods = "mpu";
|
||
|
|
sram = <&ocmcram>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* XXX: Use a flat representation of the OMAP3 interconnect.
|
||
|
|
* The real OMAP interconnect network is quite complex.
|
||
|
|
* Since it will not bring real advantage to represent that in DT for
|
||
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
||
|
|
* hierarchy.
|
||
|
|
*/
|
||
|
|
ocp {
|
||
|
|
compatible = "ti,omap5-l3-noc", "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0 0 0xc0000000>;
|
||
|
|
dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
|
||
|
|
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
|
||
|
|
reg = <0 0x44000000 0 0x2000>,
|
||
|
|
<0 0x44800000 0 0x3000>,
|
||
|
|
<0 0x45000000 0 0x4000>;
|
||
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
|
||
|
|
l4_wkup: interconnect@4ae00000 {
|
||
|
|
};
|
||
|
|
|
||
|
|
l4_cfg: interconnect@4a000000 {
|
||
|
|
};
|
||
|
|
|
||
|
|
l4_per: interconnect@48000000 {
|
||
|
|
};
|
||
|
|
|
||
|
|
l4_abe: interconnect@40100000 {
|
||
|
|
};
|
||
|
|
|
||
|
|
ocmcram: sram@40300000 {
|
||
|
|
compatible = "mmio-sram";
|
||
|
|
reg = <0x40300000 0x20000>; /* 128k */
|
||
|
|
};
|
||
|
|
|
||
|
|
gpmc: gpmc@50000000 {
|
||
|
|
compatible = "ti,omap4430-gpmc";
|
||
|
|
reg = <0x50000000 0x1000>;
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dmas = <&sdma 4>;
|
||
|
|
dma-names = "rxtx";
|
||
|
|
gpmc,num-cs = <8>;
|
||
|
|
gpmc,num-waitpins = <4>;
|
||
|
|
ti,hwmods = "gpmc";
|
||
|
|
clocks = <&l3_iclk_div>;
|
||
|
|
clock-names = "fck";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@55082000 {
|
||
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
||
|
|
reg = <0x55082000 0x4>,
|
||
|
|
<0x55082010 0x4>,
|
||
|
|
<0x55082014 0x4>;
|
||
|
|
reg-names = "rev", "sysc", "syss";
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
||
|
|
SYSC_OMAP2_SOFTRESET |
|
||
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
||
|
|
clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
|
||
|
|
clock-names = "fck";
|
||
|
|
resets = <&prm_core 2>;
|
||
|
|
reset-names = "rstctrl";
|
||
|
|
ranges = <0x0 0x55082000 0x100>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
|
||
|
|
mmu_ipu: mmu@0 {
|
||
|
|
compatible = "ti,omap4-iommu";
|
||
|
|
reg = <0x0 0x100>;
|
||
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#iommu-cells = <0>;
|
||
|
|
ti,iommu-bus-err-back;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
dmm@4e000000 {
|
||
|
|
compatible = "ti,omap5-dmm";
|
||
|
|
reg = <0x4e000000 0x800>;
|
||
|
|
interrupts = <0 113 0x4>;
|
||
|
|
ti,hwmods = "dmm";
|
||
|
|
};
|
||
|
|
|
||
|
|
emif1: emif@4c000000 {
|
||
|
|
compatible = "ti,emif-4d5";
|
||
|
|
ti,hwmods = "emif1";
|
||
|
|
ti,no-idle-on-init;
|
||
|
|
phy-type = <2>; /* DDR PHY type: Intelli PHY */
|
||
|
|
reg = <0x4c000000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
hw-caps-read-idle-ctrl;
|
||
|
|
hw-caps-ll-interface;
|
||
|
|
hw-caps-temp-alert;
|
||
|
|
};
|
||
|
|
|
||
|
|
emif2: emif@4d000000 {
|
||
|
|
compatible = "ti,emif-4d5";
|
||
|
|
ti,hwmods = "emif2";
|
||
|
|
ti,no-idle-on-init;
|
||
|
|
phy-type = <2>; /* DDR PHY type: Intelli PHY */
|
||
|
|
reg = <0x4d000000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
hw-caps-read-idle-ctrl;
|
||
|
|
hw-caps-ll-interface;
|
||
|
|
hw-caps-temp-alert;
|
||
|
|
};
|
||
|
|
|
||
|
|
bandgap: bandgap@4a0021e0 {
|
||
|
|
reg = <0x4a0021e0 0xc
|
||
|
|
0x4a00232c 0xc
|
||
|
|
0x4a002380 0x2c
|
||
|
|
0x4a0023C0 0x3c>;
|
||
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
compatible = "ti,omap5430-bandgap";
|
||
|
|
|
||
|
|
#thermal-sensor-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* OCP2SCP3 */
|
||
|
|
sata: sata@4a141100 {
|
||
|
|
compatible = "snps,dwc-ahci";
|
||
|
|
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
|
||
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
phys = <&sata_phy>;
|
||
|
|
phy-names = "sata-phy";
|
||
|
|
clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
|
||
|
|
ti,hwmods = "sata";
|
||
|
|
ports-implemented = <0x1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@56000000 {
|
||
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
||
|
|
reg = <0x5600fe00 0x4>,
|
||
|
|
<0x5600fe10 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
|
||
|
|
clock-names = "fck";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x56000000 0x2000000>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Closed source PowerVR driver, no child device
|
||
|
|
* binding or driver in mainline
|
||
|
|
*/
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@58000000 {
|
||
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
||
|
|
reg = <0x58000000 4>,
|
||
|
|
<0x58000014 4>;
|
||
|
|
reg-names = "rev", "syss";
|
||
|
|
ti,syss-mask = <1>;
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
|
||
|
|
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
|
||
|
|
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
|
||
|
|
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
|
||
|
|
clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x58000000 0x1000000>;
|
||
|
|
|
||
|
|
dss: dss@0 {
|
||
|
|
compatible = "ti,omap5-dss";
|
||
|
|
reg = <0 0x80>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0 0x1000000>;
|
||
|
|
|
||
|
|
target-module@1000 {
|
||
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
||
|
|
reg = <0x1000 0x4>,
|
||
|
|
<0x1010 0x4>,
|
||
|
|
<0x1014 0x4>;
|
||
|
|
reg-names = "rev", "sysc", "syss";
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
||
|
|
SYSC_OMAP2_ENAWAKEUP |
|
||
|
|
SYSC_OMAP2_SOFTRESET |
|
||
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
||
|
|
ti,syss-mask = <1>;
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x1000 0x1000>;
|
||
|
|
|
||
|
|
dispc@0 {
|
||
|
|
compatible = "ti,omap5-dispc";
|
||
|
|
reg = <0 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@2000 {
|
||
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
||
|
|
reg = <0x2000 0x4>,
|
||
|
|
<0x2010 0x4>,
|
||
|
|
<0x2014 0x4>;
|
||
|
|
reg-names = "rev", "sysc", "syss";
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
|
||
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
||
|
|
ti,syss-mask = <1>;
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x2000 0x1000>;
|
||
|
|
|
||
|
|
rfbi: encoder@0 {
|
||
|
|
compatible = "ti,omap5-rfbi";
|
||
|
|
reg = <0 0x100>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
|
||
|
|
clock-names = "fck", "ick";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@5000 {
|
||
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
||
|
|
reg = <0x5000 0x4>,
|
||
|
|
<0x5010 0x4>,
|
||
|
|
<0x5014 0x4>;
|
||
|
|
reg-names = "rev", "sysc", "syss";
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
||
|
|
SYSC_OMAP2_ENAWAKEUP |
|
||
|
|
SYSC_OMAP2_SOFTRESET |
|
||
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
||
|
|
ti,syss-mask = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x5000 0x1000>;
|
||
|
|
|
||
|
|
dsi1: encoder@0 {
|
||
|
|
compatible = "ti,omap5-dsi";
|
||
|
|
reg = <0 0x200>,
|
||
|
|
<0x200 0x40>,
|
||
|
|
<0x300 0x40>;
|
||
|
|
reg-names = "proto", "phy", "pll";
|
||
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@9000 {
|
||
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
||
|
|
reg = <0x9000 0x4>,
|
||
|
|
<0x9010 0x4>,
|
||
|
|
<0x9014 0x4>;
|
||
|
|
reg-names = "rev", "sysc", "syss";
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>;
|
||
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
||
|
|
SYSC_OMAP2_ENAWAKEUP |
|
||
|
|
SYSC_OMAP2_SOFTRESET |
|
||
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
||
|
|
ti,syss-mask = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x9000 0x1000>;
|
||
|
|
|
||
|
|
dsi2: encoder@0 {
|
||
|
|
compatible = "ti,omap5-dsi";
|
||
|
|
reg = <0 0x200>,
|
||
|
|
<0x200 0x40>,
|
||
|
|
<0x300 0x40>;
|
||
|
|
reg-names = "proto", "phy", "pll";
|
||
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@40000 {
|
||
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
||
|
|
reg = <0x40000 0x4>,
|
||
|
|
<0x40010 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
||
|
|
<SYSC_IDLE_NO>,
|
||
|
|
<SYSC_IDLE_SMART>,
|
||
|
|
<SYSC_IDLE_SMART_WKUP>;
|
||
|
|
ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
|
||
|
|
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
|
||
|
|
clock-names = "fck", "dss_clk";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x40000 0x40000>;
|
||
|
|
|
||
|
|
hdmi: encoder@0 {
|
||
|
|
compatible = "ti,omap5-hdmi";
|
||
|
|
reg = <0 0x200>,
|
||
|
|
<0x200 0x80>,
|
||
|
|
<0x300 0x80>,
|
||
|
|
<0x20000 0x19000>;
|
||
|
|
reg-names = "wp", "pll", "phy", "core";
|
||
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
status = "disabled";
|
||
|
|
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
|
||
|
|
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
|
||
|
|
clock-names = "fck", "sys_clk";
|
||
|
|
dmas = <&sdma 76>;
|
||
|
|
dma-names = "audio_tx";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
abb_mpu: regulator-abb-mpu {
|
||
|
|
compatible = "ti,abb-v2";
|
||
|
|
regulator-name = "abb_mpu";
|
||
|
|
#address-cells = <0>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
clocks = <&sys_clkin>;
|
||
|
|
ti,settling-time = <50>;
|
||
|
|
ti,clock-cycles = <16>;
|
||
|
|
|
||
|
|
reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
|
||
|
|
<0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
|
||
|
|
reg-names = "base-address", "int-address",
|
||
|
|
"efuse-address", "ldo-address";
|
||
|
|
ti,tranxdone-status-mask = <0x80>;
|
||
|
|
/* LDOVBBMPU_MUX_CTRL */
|
||
|
|
ti,ldovbb-override-mask = <0x400>;
|
||
|
|
/* LDOVBBMPU_VSET_OUT */
|
||
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* NOTE: only FBB mode used but actual vset will
|
||
|
|
* determine final biasing
|
||
|
|
*/
|
||
|
|
ti,abb_info = <
|
||
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
||
|
|
1060000 0 0x0 0 0x02000000 0x01F00000
|
||
|
|
1250000 0 0x4 0 0x02000000 0x01F00000
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
abb_mm: regulator-abb-mm {
|
||
|
|
compatible = "ti,abb-v2";
|
||
|
|
regulator-name = "abb_mm";
|
||
|
|
#address-cells = <0>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
clocks = <&sys_clkin>;
|
||
|
|
ti,settling-time = <50>;
|
||
|
|
ti,clock-cycles = <16>;
|
||
|
|
|
||
|
|
reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
|
||
|
|
<0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
|
||
|
|
reg-names = "base-address", "int-address",
|
||
|
|
"efuse-address", "ldo-address";
|
||
|
|
ti,tranxdone-status-mask = <0x80000000>;
|
||
|
|
/* LDOVBBMM_MUX_CTRL */
|
||
|
|
ti,ldovbb-override-mask = <0x400>;
|
||
|
|
/* LDOVBBMM_VSET_OUT */
|
||
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* NOTE: only FBB mode used but actual vset will
|
||
|
|
* determine final biasing
|
||
|
|
*/
|
||
|
|
ti,abb_info = <
|
||
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
||
|
|
1025000 0 0x0 0 0x02000000 0x01F00000
|
||
|
|
1120000 0 0x4 0 0x02000000 0x01F00000
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_thermal {
|
||
|
|
polling-delay = <500>; /* milliseconds */
|
||
|
|
coefficients = <65 (-1791)>;
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "omap5-l4.dtsi"
|
||
|
|
#include "omap54xx-clocks.dtsi"
|
||
|
|
|
||
|
|
&gpu_thermal {
|
||
|
|
coefficients = <117 (-2992)>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&core_thermal {
|
||
|
|
coefficients = <0 2000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "omap5-l4-abe.dtsi"
|
||
|
|
#include "omap54xx-clocks.dtsi"
|
||
|
|
|
||
|
|
&prm {
|
||
|
|
prm_dsp: prm@400 {
|
||
|
|
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
|
||
|
|
reg = <0x400 0x100>;
|
||
|
|
#reset-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
prm_core: prm@700 {
|
||
|
|
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
|
||
|
|
reg = <0x700 0x100>;
|
||
|
|
#reset-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
prm_iva: prm@1200 {
|
||
|
|
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
|
||
|
|
reg = <0x1200 0x100>;
|
||
|
|
#reset-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
prm_device: prm@1c00 {
|
||
|
|
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
|
||
|
|
reg = <0x1c00 0x100>;
|
||
|
|
#reset-cells = <1>;
|
||
|
|
};
|
||
|
|
};
|